NEO Moving Torch Bedienungsanleitung

P. 1

- Neo Moving Torch

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

NEO MOVING

TORCH

2-IN-1 MOVING HEAD /

LASER + WASH

P. 2

Neo Moving Torch -

1. OVERVIEW

English version

MOVING TORCH

Moving Torch is a revolutionary 2-in-1 moving head

that integrates a powerful RGB laser with a very

wide and powerful wash eect. The unit is equipped

with a 1000mW red laser of, a 1000mW green laser

and a 2000mW blue laser, in addition to 9 x 4-in-1

10W LEDs. High-speed movements, 144 built-in laser

patterns, and the ability to mix the colors of the LEDs

without limitations, Moving Torch not only delivers

4000mW of laser power, but also creates unprece-

dented visual eects. The equipment can be con-

trolled both by DMX and ILDA and also has an SD slot

to perform updates or load programs. Ideal for large-

scale applications, Moving Torch provides mobility

and versatility to designs where a high-power laser

was once required.

Source & Optics

• Laser:

• Red: 1000mW / 635nm

• Green: 1000mW / 520nm

• Blue: 2000mW / 445nm

• Beam size: 5mm at aperture

• Divergence: <2mrad - full angle

• Scan angle: -+30º

• Wash: 9 4-in-1 10W LEDs

• Beam angle (LEDs): 25º

• LEDs life: 50,000 hours

Eﬀects & Functions

• RGB full color laser

• Adjustable RGB levels

• Ultra-compact design

• 144 Built-in laser patterns

• Scanner system: 30/40kpps

• X/Y Invert

• Zoom function

• Quad-color LED technology: Smooth RGBW

mix with no multi-colored shadows

• Dimmer: 0-100%

• Flicker Free

• 2-in-1 Eect: Laser + Wash

Control

• DMX channels: 27

• Operational modes: ILDA, DMX, Sound-active,

Master/Slave & Autorun

• Compatible with ILDA interface and SD card

Electrical

• Power supply: AC90V~240V 50/60Hz

• Max power consumption: 1000W

• Operating temperature: 10ºC~40ºC

Physical

• Color LCD Display

• DMX Connectors: 2 XLR connectors (XLR-3

input & output)

• ILDA Connectors: 2 DB25 connectors (DB25

input & output)

• Power supply connector: PowerCon® In

• Dimensions: 390x250x580 mm. / 15x9.8x22.8

in.

• Weight: 13 Kg. / 28.6 Lbs.

P. 3

- Neo Moving Torch

English version

INTRODUCTION

Thank you for purchasing this product. To

optimize the performance of this product, prior

to use, please read these operating instructions

carefully to familiarize yourself with the basic

operation of this unit. Please keep the manual

in safe price for future reference.

This unit has been tested at our factory before

being shipped to you, there is no assembly

required.

Once aer received this product , please take

and put carefully. And check cautiously that

whether the product was damaged or not dur-

ing the transportation.

Checking Parts

Please check if the following parts are included:

• 1 Laser

• 1 Power cable

• 1 User manual

P. 4

Neo Moving Torch -

2. ATTENTION

Avoid direct eye exposure! Laser radiation can cause eye damage orskin damage.

All protective measures fora safe operation of this lasermust be applied.

LASER RADIATION

1. Please do not open the bottom cover yourself

without permission. Operate it accord the user

manual. Call the technician when the machine

breaks down.

2. Please do not see the laser beam directly to

avoid any damage.

3. Before connect or disconnect the power, please

adjust the luminance of the laser diode to the

least to avoid any damage to the laser diode.

4. This unit should be keep dry, do not use in the

rain and dusty environment. It can be use in the

outdoor with the water-proof cover protector.

5. Set the light immobility and try to avoid strong

shake or hit.

6. Prevent dust into the equipment to avoid prob-

lems.

7. Please keep that there’s no other equipment or

decorating materials obstructed the exhaust

fan and the vent-pipe when the equipment was

working.

8. Before connect power, check the plug is immo-

bility or not, power line should be connect well.

9. Please do not open or close the equipment

frequently that’s to avoid any aect to the life

span of the laser diode, and try the best to

avoid the long time working.

10. Due to the characteristic of the laser diode,

aer four hours working, it should be close at

least 25 minutes until the laser diode cooling

then work again.

11. Don’t touch the light or draw the power line

when your hand was wet. And do not pull the

electronic power line.

12. Maintain the distance at least 3M above from

the equipment to the object.

13. This equipment does not have any parts can

repair for the users, please do not open the

equipment.

14. When the laserdiode becamedim ordamaged

pleasecontactthe dealer timely.

15. When you want to retransfer the products,

you’d better use the original package to

shockproof.

English version

P. 5

- Neo Moving Torch

Mode TFT Display

1 Sound mode

2Auto mode

3 DMX 512

control mode (27CH)

4 SD mode

3. INSTALLATION

1. Please check the voltage whether is the same

with the one showed on the equipment or not.

2. It must ask for the technical person and set the

light safety when installation. And let the light

beam at the suitable angle.

3. When install this equipment please make sure

there’s no ammable surfaces (decorated

things, etc) within at least 2.5M and maintain

minimum distance of 0.5M from the equip-

ment to the walls.

4. Please make sure that there’s no other equip-

ment or decorating materials obstructed the

exhaust fan and the vent-pipe.

5. Products should be install immobility.

6. In case of safety, it’s very important that to

connect the earth with line.

English version

TFT setting

P. 6

Neo Moving Torch -

Link the lights as the following picture (the light which does not receive signal, only output signal, will be the

master light)

Input DMX signal, and the link the DMX controller and the lights by the control line as the following picture, you

can control the lights by the controller.

5. MASTER-SLAVE SETTING

4. DMX SETTING

English version

DMX Controller

Light 1 Light 2 Light 2

Light n

Control line Control line

Light 1 Light 2 Light n

Control line Control line

P. 7

- Neo Moving Torch

1. Touch keys and TFT menu display, menu oper-

ation is simple and easy to use. Boot wait for

system restoration automatic loading system-

soware.

2. Through the UP and DOWN buttons to select

the need of function.

3. Determined by the selected function ENTER

and MENU button, return to the last level

menu.

Before using please check if power supply link

with earth wire correctly or not.

6. TFT DISPLAY PANEL

English version

P. 8

Neo Moving Torch -

7. SPECIFICATIONS OF THE FRONT AND REAR PANEL

English version

1. Power input

2. Power switch

3. Fuse 3A

4. DMX IN/ DMX OUT: DMX512

signal output and input

5. TFT display

6. Display

P. 9

- Neo Moving Torch

8. MENU INTRODUCTION

English version

MENU STRUCTURE CHART

Main menu Secondary menu Third menu

Running mode

DMX 512 mode (27 channel)

Auto mode (auto 1)

Sound (sound 1)

SD mode

Play mode single

Menu 001~008

File 001~008

Motor mode xed point

Pan axis 000~255

Tilt axis 000~255

LED mode Bright/Strobeing/Drawing

LED color O

Address setting Address setting(1-512)

Language English

Chinese

Advanced setting

Motor setting

X axis horizontal invert ( ON/OFF)

Y axis vertical invert ( ON/OFF)

X axis running angle (360° /540°)

Laser setting

X axis invert (ON/OFF)

Y axis invert (ON/OFF)

X zoom (0-255)

Y zoom (0-255)

X/Y zoom (0-255)

System setting

Master-slave setting (ON/OFF)

Color setting (RGB/single color)

Scanner K (20k-40k)

One beam protect (ON/OFF)

Screen protect ( ON/OFF)

Screen 180° invert ( ON/OFF)

LOGO ( ON/OFF)

Motor reset ( ON/OFF)

P. 1 0

Neo Moving Torch -

English version

Reset factory setting (ON/OFF)

Password

Test mode

X axis horizontal

Motor (0-255)

Y axis vertical motor (0-255)

X axis adjust (0-255)

Y axis adjust (0-255)

Laser test pattern (test 0-3)

LED R 000~255

LED G 000~255

LED B 000~255

LED W 000~255

System information

Address code

Running mode

On time (on the run time)

Run time (use of total time)

Serial number

Version information

Main menu

Through the buttons control the cursor,press “EN-

TER “ button to enter setup.

Secondary menu

Secondary menu include of running mode, address

setting, language setting, advanced settings, sys-

tem setting, system information and so on.

1. Running mode, at the same time only can run

one mode, select the music mode or automat-

ic mode, press the “ENTER” button can also

choose dierent control mode like as music

mode or automatic mode eect. DMX mode,

at the same time for master-slave mode, if link

the DMX signal, it is DMX model, if is the mas-

ter signal, can be used as master -slave mode.

Auto mode,Auto mode at same time as master

mode. when open master-slave, slave mode as

DMX mode

2. Address setting, setting aer need press

“enter” save address code, then back to main

menu. if u press “return” means no save ad-

dress code.

3. Language setting: menu language can setting

Chinese and English.

4. Advanced settings:

a. Motor setting:

• X axis horizontal invert (ON/OFF)

• Y axis vertical invert (ON/OFF)

• X axis running angle (360°/540°)

b. Laser setting :

• X axis invert (ON/OFF)

• Y axis invert (ON/OFF)

• X axis zoom (0-255)

• Y axis zoom( 0-255) whole zoom 0--255

c. System setting:

• master-slave setting (ON/OFF)

• Color setting (RGB/single color)

• scanner K(20k-40k)

• screen protect---can setting of o/on.

When o, aer screen play,clean screen. aer

Inhaltsverzeichnis

Sprachen:

Andere NEO DJ-Equipment Handbücher

NEO

NEO STEAM INFINITE 450 Bedienungsanleitung

NEO

NEO Proton 12 HEX USB Bedienungsanleitung

NEO

NEO ZOOM PANEL Bedienungsanleitung

NEO

NEO ION 575 Bedienungsanleitung

NEO

NEO FLEX STRIP Bedienungsanleitung

NEO

NEO ION 1915Z Bedienungsanleitung

NEO

NEO PROTON IP 7 QA Bedienungsanleitung

NEO

NEO Proton 6 QUAD USB Bedienungsanleitung

NEO

NEO Sion Bedienungsanleitung

NEO

NEO STORMER QUAD Bedienungsanleitung

NEO

NEO ELIPSOLED LITE 50 Bedienungsanleitung

NEO

NEO ION 740Z Bedienungsanleitung

NEO

NEO FOLLOWER 15R Bedienungsanleitung

NEO

NEO PROTON IP Bedienungsanleitung

NEO

NEO PROTON IP QW ZOOM Bedienungsanleitung

NEO

NEO Ion 280 3-en-1 Bedienungsanleitung

NEO

NEO FRESNELED COLOR Bedienungsanleitung

NEO

NEO STEAM F700 Bedienungsanleitung

NEO

NEO ION 610B RGBW Bedienungsanleitung

NEO

NEO ION 280F Bedienungsanleitung

NEO

NEO Mini Panel Bedienungsanleitung

NEO

NEO ELIPSOLED 5600 MAX Torch 4000 Bedienungsanleitung

NEO

NEO NEO FLEX TRUSS Bedienungsanleitung

NEO

NEO NEO STRIP GOLD Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung