Neoline X-COP 9100 Bedienungsanleitung
1
User’s Manual of X-COP 9100
[ X-COP 9100 Introduction]
- X-COP 9100 is high performance GPS Radar Detector with Full HD Black Box specially designed and optimized
for Russian market, which receives the signals of X, K, Ka, Laser, Strelka bands and GPS & Glonass signal
effectively.
- X-COP 9100 uses the Ambarella A7 Chip for Black box which is the up to date technology so that a high resolution
video recording is always available.
- X-COP 9100 uses IMX322 which is an image sensor with high quality made by SONY; especially it shows very
good quality at nighttime video.
- 2.0 inch IPS LCD helps user to see the video easily and the Radar and GPS alert screen effectively.
- The GPS & Glonass module is equipped so that it catches the fixed and moving speed cameras in addition to
Radar signal detection and gives an exact warning to driver effectively.
- X-COP 9100 has a special feature as “Motion Control TM” which controls mute on/off function by hand gesture.
- Before using X-COP 9100, please read the method of use as follows.
Contents
[ Features ] ....................................................................................................................................................................... 2
[ Specifications ] ............................................................................................................................................................. 3
1. Car Blackbox specifications ............................................................................................................................ 3
2. Radar specifications ......................................................................................................................................... 4
3. GPS specifications ......................................................................................................................................... 4
4. Characteristics .................................................................................................................................................. 4
[ Devices & Accessories ]............................................................................................................................................... 5
[ Installation ] ................................................................................................................................................................... 6
1. Mounting ............................................................................................................................................................ 6
2. Power cable installation ................................................................................................................................... 7
[ Operation ] ..................................................................................................................................................................... 8
1. Buttons .............................................................................................................................................................. 8
2. Power On and Off. ............................................................................................................................................ 9
3. All time display (Normal Screen) .................................................................................................................. 91
4. Parking mode ................................................................................................................................................ 134
2
5. Motion Control
TM
operation ........................................................................................................................ 135
6. Mute ................................................................................................................................................................ 146
7. Auto mute ...................................................................................................................................................... 146
8. Voice On/Off .................................................................................................................................................. 146
9. Beep On/Off ................................................................................................................................................... 146
10. Radar band On/Off ........................................................................................................................................ 146
11. Firmware upgrade ..................................................................................... Error! Bookmark not defined.6
12. Sd card format ........................................................................................... Error! Bookmark not defined.8
13. Radar alert ................................................................................................................................................... 18
14. GPS alert ...................................................................................................................................................... 19
15. Setting mode ............................................................................................................................................ 181
16. X-COP Player ............................................................................................................................................... 30
[ Features ]
- Full HD Car Black-box with Radar & Laser detection and GPS & Glonass Alert
- 2.0 inch IPS LCD display
- Blue LED indication for recording status
- Full HD Image recording
- Audio recording
- 3 Recording modes(Driving/Event/Manual)
- Support recording at parking mode
- Support Image capture at battery mode
- Support Micro SD Card(SDHC : 2GB ~ 32GB)
3
- 5 Buttons (Power On/Off Button, Up, Down, Menu, Select Button)
- Electrical Volume Control(9-Levels)
- 3-Axis G-sensor & Motion detection sensor
- Support Russian and English text
- Support video play on LCD display
- Updateable Blackbox Firmware / Database and Radar Firmware
- “Motion Control TM”
- Silence mode
- Silence zone
- Radius setting for GPS POI alerting
- GPS POI Detection distance setting
- Legal Over speeding setting
- Maximum over speed
- Support PC Viewer
- Detectable X / K / Ka / Laser / Strelka
- Undetectable by VG-2
- 12V~24V usability
[ Specifications ]
1. Car Blackbox specifications
Processor : Ambarella A7LA30
Resolution : 1920*1080 (real Full HD) / 1280*720(HD)
Image Sensor : IMX322LQJ (Sony)
Optical Lens : 57.4º(V) * 108.5º(H) * 129.7º(D), All glass
Display : 2.0 inch IPS LCD (240 * 320 resolution)
Back-up battery : Li-polymer battery (220mA, 5C, 3.7V)
Video format : MP4
4
Recording frame : 30fps
Driving recording time : recording 1 minute, 2 minute, 3 minute, 5 minute
Event recording time : before 10 seconds ~ after 50 seconds, total 1 minutes
Storage : Micro SD Card (SDHC 2GB ~ 32GB, SDXC : 128GB)
3-Axis G-Sensor
2. Radar specifications
Ultra-X and Ultra-K Band
X-Band (10.525GHz +/- 50MHz)
K-Band (24.150GHz +/- 100MHz)
KA-Band (34.70GHz +/- 1300MHz)
Laser Band (800nm ~ 1100nm)
Strelka detection with signal strength level indication (24.150 GHZ)
3. GPS specifications
GPS & Glonass Module : MK-120G (U-BLOX8)
Patch antenna (13mm * 13mm)
Hot start time : < 1 second
Cold start time : < 35 seconds
4. Characteristics
Input voltage : DC 11V ~ 24V
Current consumption : 350mA ~ 450mA
Dimension : 94(L) * 73(W) * 46(H)
Operating Temperature : -20°C ~ 70°C
5
[ Devices & Accessories ]
- The following items are included in the packaging.
①
X-COP 9100 unit
②
Wind-shield mounting holder with suction-cup - Optional
③
Wind-shield mounting Power holder with 3M Tape
④
Cigarette power cord (DC12V ~ 24V)
⑤
All times power cable (DC12V ~ 24V) - Optional
⑥
Cord-clip (8PCS)
⑦
Micro SD card (8GB) with Adapter - Optional
6
[ Installation ]
1.
Mounting
1.1.
Recommended location
-
The location at the following picture is recommended for the best video recording. The location is the
almost of the center of windshield and just behind of room mirror but the display needs to be visible as
like the following picture.
1.2. Mounting method
1.2.1. The holder with suction cup
Attach the suction cup of the holder to windshield and then connect the unit. At this moment, the
camera lens must be directed to the front at horizontal position.
1.2.2. Power holder with 3M Tape
Attach the 3M tape side of the holder to windshield and then connect the unit as like the following
picture. However the adhesiveness of the 3M tape is very strong so that you need to decide the 1
st
attaching
location carefully.
This Power holder is specially designed to have a power circuit inside the holder. So, user can
connect the power jack to the holder directly. That is, user can attach and detach X-COP 9100 unit
itself easily.
7
2.
Power cable installation
2.1. Cigarette power cord
The following installation of Cigarette power cord is recommended for the cable not to disturb driver’s vision.
It is helpful to use the cord clips to fix the cable during installation.
2.2.
All times power cable
Connect the cable to the fuse box as like the following picture.
How to connect it to fuse box is as follows.
Connect the BATT(+) terminal of the cable to the fuse for brake lamp in fuse box.
Connect the ACC terminal of the cable to the fuse of Cigar Lighter in fuse box.
Connect the GND(-) of the cable to ground of the car.
8
[ Operation ]
1. Buttons
1.1. Power Button
1.1.1. Press and hold Power button for two seconds at power off condition and it becomes power on.
1.1.2. Press and hold Power button for two seconds at power on condition and it becomes power off.
1.2. Up, Down Button
1.2.1. Press these buttons shortly at power on condition (normal screen), they are operated as volume Up
and Down.
1.2.2. Press these buttons shortly at the Menu, they are operated as move buttons.
1.2.3. Press and hold “Up”, “Down” button for two seconds at the Menu, it moves the next page or the
previous page.
1.3. Menu Button
1.3.1. Press “Menu” button shortly at power On condition and it enters into the Setting mode.
1.3.2. Press and hold “Menu” button for two seconds at power On condition and it enters into the quick
menu.
1.3.3. Press “Menu” button shortly at the Menu and it comes out from the Menu (Exit).
9
1.4. Select Button
1.4.1. Press “Select” button shortly at power On condition and it enters into Radar quick menu.
1.4.2. Press “Select” button shortly at the Menu and it is operated as ‘Select’ function.
1.4.3. Press and hold “Select” button for two seconds at power On condition and Manual recording will be
started. It records before 10 seconds ~ after 50 seconds.
1.4.4. Press and hold “Select” button for two seconds at power On (= power cable is not connected) and
the current screen will be captured. This captured screen will be stored at the “Event” folder of SD
card and the image resolution is 1920*1080 pixels.
1.5. RESET Button
X-COP 9100 uses a battery so that there may be a case of system down unexpectedly.
In this case, you can Re-booting by pressing the RESET button.
2. Power On and Off.
2.1. X-COP 9100 will power On when user starts car engine or presses the power button for two seconds and
will show the following start-up image and then become a normal screen as follows.
(LOGO display) (Normal screen)
2.2. X-COP 9100 will power Off when user turns off the car engine or presses the power button for two seconds.
3. All times display (Normal Screen)
10
Frequently using icons and the status of GPS and Recording are indicated on Normal Screen.
No. ① : Speed display
It shows the current car speed.
No. ② : GPS status
It shows the GPS connection/disconnection status.
(GPS Connection) (GPS Disconnection)
3.1. No. ③ : Time
It shows the current time.
3.2. No. ④ : City/Highway/Turbo/X-COP mode (operation by Select Button)
( X-COP Icon ) ( City Icon ) (Highway Icon) (Turbo Icon)
Inhaltsverzeichnis
Andere Neoline Radarwarngerät Handbücher
