Neousys Technology Nuvo-9501 Referenzhandbuch

Nuvo-9501

Quick Introduction Guide

• Only qualified service personnel should install and service this

product to avoid damage or injury.

• Observe all ESD procedures during installation to avoid damaging

the equipment.

Unpack the equipment and make sure the following tools are

available and delivered contents are correct.

1-1. User-provided tools

1-2. Packing List

• Anti-static wrist wrap

1Preparing tools

Warning

Overview - Front Panel

Nuvo-9501 system

CPU bracket

3-pin pluggable terminal block

Screw pack

Item Description Quantity

Power Button

The power button is a non-latched switch for ATX mode on/off

operation. To turn on the system, press the power button and the

PWR LED should light-up green. To turn off the system, issuing a

shutdown command in OS is preferred, or you can simply press the

power button. To force shutdown when the system freezes, press

and hold the power button for 5 seconds. Please note that there is a

5-second interval between on/off operations (i.e. once the system is

turned off, there is a 5-second wait before you can power-on the

system).

System Status LED

There are four LED indicators on the I/O panel: PWR (power),

WDT (Watchdog timer), HDD (hard disk drive). The descriptions

of the LED are listed in the following table.

Reset Button

The reset button is used to manually reset the system in case of

system halt or malfunction. To avoid unexpected reset, the button is

purposely placed behind the panel. To reset, please use a pin-like

object (eg. tip of a pen) to access the reset button.

2.5G Ethernet Port

The system offers two 2.5Gb Ethernet ports using Intel® I226

controller, and each port each come with screw-lock mechanism

(indicated in ). When plugged in and connected via the Ethernet

cable, the LEDs on the RJ45 connector indicate connection status

and speed.

red

CMOS Reset Button

DisplayPort 8

7USB3.2 Gen1 Port

The system has a DisplayPort (DP) output which is a digital display

interfaces that mainly connect video source and carry audio to a

display device. When connecting a DP, it can deliver up to 4K UHD

(4096 x 2304) in resolution. The system is designed to support

passive DP adapter/ cable. You can connect to other display

devices using DP-to-HDMI cable or DP-to-DVI cable.

With the VGA output on the rear panel, the system supports dual

independent display outputs. To support dual display outputs and

achieve best VGA/ DisplayPort output resolution in Windows, you

need to install corresponding graphics drivers.

The system offers four USB 3.2 Gen1 (SuperSpeed USB) ports on its

front panel with screw-lock mechanism. They are backward

compatible with USB 2.0, USB 1.1 and USB 1.0 devices. UEFI USB is

also supported so you can use USB keyboard/ mouse in UEFI shell

environment. USB 3.2 Gen1 driver is supported natively in Windows

10. The screw-lock mechanism is available on the three ports

indicated in and and due to the width of the

connector, only t

blue red

red

, screw-lock

he USB ports indicated in can be connected

simultaneously when using the screw-lock mechanism

The CMOS Reset button is used to manually reset the motherboard

BIOS in case of system halt or malfunction. To avoid unexpected

operation, it is purposely placed behind the panel. To reset, please use

the tip of a pen, press and hold for at least 5 seconds to reset the BIOS.

Depending on the design of your screw-lock USB connector, the CMOS

reset button may be obstructed if the USB pot below is connected.

10 Overview - Rear Panel

Note

4-Pole 3.5mm Microphone-in/ Speaker-out Jack

11 VGA Port

Note

Please make sure your VGA cable includes SDA and SCL (DDC clock and

data) signals for correct communication with monitor to get

resolution/timing information. A cable without SDA/ SCL can cause blank

screen on your VGA monitor due to incorrect resolution/timing output.

VGA connector is the most common video display connection. The

VGA output supports up to 1920x1200@60Hz resolution.

With the DisplayPort on the front panel, the system supports dual

independent display outputs. To support dual display outputs and

achieve best VGA/ DisplayPort output resolution in Windows, you

need to install corresponding graphics drivers.

There is a female 4-pole audio jack for headphone (speaker)

output and microphone input. To utilize the audio function in

Windows, you need to install corresponding drivers.

COM2/3/4 Port

The port s it

provide up to 921600 bps baud rate, can be configured in

the BIOS as single RS-422/ 485 port (COM2) or three 3-wire RS-232

ports (COM2/ / 4). An optional 1-to-3 Y-cable is available to

connect three RS-232 devices.

15 USB2.0 Port

The USB2.0 ports are implemented via native xHCI (eXtensible

Host Controller Interface) in the Intel 600 chipset and are

backward compatible with USB 1.1 and USB 1.0 devices. UEFI

USB support is also provided so you can use USB keyboard/

mouse in UEFI shell environment.

xHCI driver is supported natively in Windows 10, therefore you do

not need to install xHCI driver to utilize USB functions.

3-pin Terminal Block & Remote ON/ Off

The system accepts a wide range of DC power input from 8 to 35V

via a 3-pin pluggable terminal block, which is fit for field usage

where DC power is usually provided. The screw clamping

mechanism on the terminal block offers connection reliability when

wiring DC power.

The Remote On/ Off connection allows for external switch

extension. It is useful when the system is placed in a cabinet or a

not easily accessed location.

Please make sure the voltage of DC power is correct before you

connect it to the system. Supplying a voltage over 35V will

damage the system.

Warning

13 COM1 Port

The port s itprovide up to 921600 bps baud rate, is

a software-configurable RS-232/422/485 port via

9-pin D-Sub male connector. The operation mode,

slew rate and termination of COM1 can be set in

BIOS setup utility. The following table describes

the pin definition of COM ports.

Andere Handbücher für Nuvo-9501

Dieses Handbuch passt für folgende Modelle

Andere Neousys Technology Industrie-PC Handbücher

Neousys Technology

Neousys Technology NRU-52S Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-5095GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-7162GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology POC-40 Series Bedienungsanleitung

Neousys Technology

Neousys Technology POC-351VTC Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-9501 Bedienungsanleitung

Neousys Technology

Neousys Technology SEMIL-1300GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-10208GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-8111 Bedienungsanleitung

Neousys Technology

Neousys Technology POC-465AWP Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-9000 Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-10108GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology SEMIL-1700GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-7000 Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-2400 Series Bedienungsanleitung

Neousys Technology

Neousys Technology SEMIL-1700 Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-7168GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-6108GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-9531 Bedienungsanleitung

Neousys Technology

Neousys Technology POC-400 Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-6108GC Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-8000 Series Bedienungsanleitung

Neousys Technology

Neousys Technology NRU-52S+ Series Bedienungsanleitung

Neousys Technology

Neousys Technology Nuvo-9160GC Series Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung