Nesco ES-08 Bedienungsanleitung
2
English
Parts
How to assemble your electric skillet
Remove all parts from the packaging.
1. Locate and remove Lid Knob in packaging.
2. Place the screw through center hole of lid. The head of screw to inside of lid.
3. Place Protector Ring over screw threads on the outside of lid. Rough side of ring
facing glass.
4. Turn Lid Knob onto screw thread while pressing on head of screw.
5. Tighten screw unl snug. Do not overghten. The Lid is now ready for use.
Before rst use
Before using the appliance, READ AND SAVE ALL INSTRUCTIONS. Wipe down the
appliance with a so damp cloth and make sure there is no metal or foreign objects
on the temperature control. Wipe dry with so cloth.
Operaon
1. Place appliance on a at, heat resistant, stable surface in a well venlated area.
2. Make sure the temperature controller is in OFF posion. Insert control into inlet
on the side of skillet. Then insert plug into electrical outlet.
3. Adjust controller to desired seng. NOTE: The signal light on controller
indicates heat seng. When desired seng is reached, the light will turn o.
It will connue to cycle on and o during use to indicate heat seng is being
automacally maintained.
4. Preheat the skillet with the lid on for 10 minutes or unl the indicator light goes out.
NOTE: The cooking temperatures listed in this user manual are esmates. Adjust the
cooking temperature slightly up or down to achieve the results you prefer.
5. A steam vent is located on the Glass Lid. The steam vent allows steam to escape
while cooking with the lid in place. CAUTION: Escaping steam is hot! Be careful
when removing or liing lid. Oven mis are recommended when removing cover
from skillet base or when replacing it.
Handles Lid Knob
Temperature
Controller
Cooking Plate
Glass Lid
3
English
Operaon (connued)
6. Place food directly onto cooking surface and cook to desired doneness.
7. When nished cooking, turn controller to OFF and remove plug from power
outlet.IMPORTANT: To avoid injury wait unl the appliance has cooled before
removing the temperature controller.
NOTE: If heang oil, always leave the lid o. If oil smokes, immediately turn skillet
“OFF” and allow to cool.
Care and Cleaning Instrucons
1. Turn temperature controller to OFF and unplug cord from power outlet.
2. Always allow grill to cool completely before cleaning and removing temperature
controller.
3. Remove the temperature controller from unit and wipe clean with a dry towel.
NEVER IMMERSE TEMPERATURE CONTROLLER IN WATER OR ANY OTHER
LIQUID.
4. Allow base to cool completely before cleaning. Absorb any excess water or grease
from base with a paper towel.
5. Immerse the skillet and lid in warm, soapy water and wash with a so cloth. Rinse
well and dry. All parts, except the temperature controller, are fully immersible and
dishwasher safe.
6. NOTE: Do Not use steel wool, abrasive cleaners, or metal scouring pads on
cooking surfaces as this will damage the non-sck coang.
Cooking Tips
• Before using the skillet for the rst me, lightly brush cooking surface with
vegetable oil. Heat, uncovered, to 300°F. Turn“OFF” and cool completely. Wipe
away excess oil.
• Metal utensils may scratch the non-sck surface.
• This skillet is not designed to deep fry. To pan-fry, do not use more than 1 cup of
oil. Select a vegetable oil or peanut oil for frying. Buer and olive oil should only
be used to sauté foods on a lower temperature seng.
Andere Handbücher für ES-08
2
Inhaltsverzeichnis
Andere Nesco Küchengerät Handbücher
Nesco
Nesco CR-1000 Series Bedienungsanleitung
Nesco
Nesco FS-10 Bedienungsanleitung
Nesco
Nesco FS-120T Bedienungsanleitung
Nesco
Nesco American Harvest FD-61 Technische Daten
Nesco
Nesco HB-17PR Technische Daten
Nesco
Nesco FS-130 Technische Daten
Nesco
Nesco FG-500 Technische Daten
Nesco
Nesco cu50 Technische Daten
Nesco
Nesco TM-1 Bedienungsanleitung
Nesco
Nesco FD-28JX Bedienungsanleitung
Nesco
Nesco FS-140R Technische Daten
Nesco
Nesco FG-180 Technische Daten
Nesco
Nesco PC-6-25 Technische Daten
Nesco
Nesco CC-32 Bedienungsanleitung
Nesco
Nesco NC-6655 EZII COOK Bedienungsanleitung
Nesco
Nesco FS-250 Technische Daten
Nesco
Nesco FS-300 Technische Daten
Nesco
Nesco FD-75A Bedienungsanleitung
Nesco
Nesco FS-250 Bedienungsanleitung
Nesco
Nesco Professional FS-150PR Technische Daten
