Netberg Aurora 615 Bedienungsanleitung
The Aurora 615 switch
installation guide
The Aurora 615 switch installation guide
iii
Table of Contents
1. Introduction ........................................................................................................................ 1
2. Hardware Installation .......................................................................................................... 2
2.1. Installation Guidelines .............................................................................................. 3
2.2. Installation into a Rack ............................................................................................ 4
2.3. Installing Transceivers and Cables into the Switch Ports ........................................... 5
2.3.1. SFP+/SFP28 Port Connection (LC Type Connector) ....................................... 5
2.3.2. QSFP+/QSFP28 Port Connection .................................................................. 6
2.4. Fan Modules ........................................................................................................... 7
2.5. Power supply .......................................................................................................... 8
2.5.1. Replacing a PSU .......................................................................................... 8
2.6. Connect the Power Cable ...................................................................................... 10
2.7. Grounding the Switch ............................................................................................ 11
2.8. Rack-mount Safety Precautions ............................................................................. 12
2.9. Console port ......................................................................................................... 13
3. Netberg Aurora 615 switch ............................................................................................... 14
3.1. Button and System LED Information ....................................................................... 16
3.2. Specification .......................................................................................................... 19
3.3. Supported Cables and Transceivers ....................................................................... 21
iv
List of Figures
2.1. Front ears installation ...................................................................................................... 4
2.2. Transceivers and cables .................................................................................................. 5
2.3. Removing the fan module ................................................................................................ 7
2.4. Inserting the fan module .................................................................................................. 7
2.5. Removing the PSU module ............................................................................................. 8
2.6. Inserting the PSU module ................................................................................................ 9
3.1. Aurora 615 front view .................................................................................................... 14
3.2. Aurora 615 rear view ..................................................................................................... 14
3.3. Aurora 615 side view ..................................................................................................... 15
3.4. Front Panel Button and LED .......................................................................................... 16
3.5. Rear Panel Button and LED .......................................................................................... 18
v
List of Tables
2.1. Console cable pin definition ........................................................................................... 13
3.1. Front panel features ...................................................................................................... 14
3.2. Rear panel features ....................................................................................................... 14
3.3. Side panel features ....................................................................................................... 15
3.4. Front panel features ...................................................................................................... 16
3.5. System LED Indicator definitions .................................................................................... 16
3.6. QSFP28 Per-Port Four LEDs Configuration definitions .................................................... 17
3.7. Ports Activity LED Information ........................................................................................ 17
3.8. Rear panel features ....................................................................................................... 18
3.9. Back View LEDs ........................................................................................................... 18
1
Chapter 1. Introduction
This guide is to assist the reader with the most basic form of installation and cable connection to
our switches. As there is more than one switch in the Aurora series, the actual port placement
might slightly differ, however, the installation and connection logic are the same for all Netberg
switches.
Package Contents:
• One Netberg Aurora Switch
• Two AC power cords.
• One console cable.
• One pair of frontal rack-mount ears.
If any of the above mention items was not found inside the package contents of this
switch or are damaged in any way, contact your reseller immediately.
2
Chapter 2. Hardware Installation
Hardware Installation
3
2.1. Installation Guidelines
This section will discuss the hardware installation guidelines that administrators must follow in or-
der to properly and safely install this switch into the appropriate environment.
Hardware Installation
4
2.2. Installation into a Rack
The switch can be secured in a standard 19"(1U) rack using the provided mounting ears. The fol-
lowing section will explain how to install the rack-mount ears onto the switch and then mount the
switch into a standard 1U rack-mount unit.
1. Use the supplied screws to attach a mounting ear to each side of the Switch.
2. Align the holes in the mounting ear with the holes in the rack.
3. Insert and tighten screws through each of the mounting ears.
Figure2.1.Front ears installation
Two individuals are recommended to install the switch. One individual should position
the switch in the rack, while the other secures it using the rack screws.
Illustrations are for reference purposes only. Actual cabinet posts may differ.
Hardware Installation
5
2.3. Installing Transceivers and Cables into
the Switch Ports
Figure2.2.Transceivers and cables
27
28
29
30
31
32
2.3.1. SFP+/SFP28 Port Connection (LC Type Connec-
tor)
The Small Form-Factor Pluggable Plus (SFP+) port is the second generation of the SFP intercon-
nect system designed for 10Gb/s data rate. The SFP+ ports support 10-gigabit IEEE 802.3ae Eth-
ernet for fiber mediums.
The Small Form-Factor Pluggable 28 (SFP28) port is the next generation of the SFP interconnect
system designed for 25Gb/s data rate. The SFP28 ports enables error-free transmission of 25 Gb/
s over 100 meters of OM4 multimode fiber.
The SFP+/SFP28 ports are numbered and have corresponding SFP port LEDs.
To install an SFP module, do the following:
1. Slide the SFP module into an SFP port.
Ensure the SFP module is positioned correctly before installing it into the port.
2. Push completely until the module locks into place.
3. Repeat the above procedures to install additional SFP+ modules.
The SFP port LED lights green when the network link is established.
Inhaltsverzeichnis
Andere Netberg Schalten Handbücher
