NetComm Wireless NF10WV Installationsanleitung

Port Forwarding Setup Guide

NF10WV FAQs

1 of 4

Port Forwarding Overview

Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly

connected. This is most commonly used for remotely accessing DVR/NVR Controller, IP Cameras, Web Server or online

gaming (via game console or computer).

Port forwarding works by “forwarding” a specific TCP or UDP port from the NF10WV to the computer or device you are using.

Prerequisite

Prior to setting the port forwarding function you must know which ports need to be opened. If you are not sure, contact the

application vendor or developer.

Add a Port Forwarding Rule

Open NF10WV Web interface

1Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type http://192.168.20.1 into the address

bar and press Enter.

2At the login screen, type admin into both the User Name and the Password fields and click OK.

2 of 4

Port Forwarding Setup Guide

Set up a Virtual Server

1From the Advanced Setup menu, open the NAT sub-menu and then select Virtual Servers.

2The NAT –Virtual Servers Setup screen will open:

3Click the Add button to add a port forwarding rule.

4The NAT –Virtual Servers screen will open:

5Select the correct Interface in the Use Interface field as a misconfiguration will end up failing to forward anything.

The correct interface can be checked from Device Info > WAN.

If you have multiple entries, choose one with an available IPv4 address.

NF10WV FAQs

3 of 4

6The Service Name drop down list has a predefined list of port forwarding for many services and games. If you can find

your desired service listed, select the item in the drop-down list and check Select a Service.

A sample configuration for “Age of Empires” is shown, above.

Important –If you found an appropriate service in the Service Name drop down list, then you can skip steps 7, 11 and 12, below.

7If you could not find one, you may create your own defined port forwarding rule, select the Custom Service button

and enter a unique name for the port forwarding rule.

A sample configuration for allowing Remote desktop and custom application access toward a single private IP is as

follows:

8Tick Enable LAN Loopback.

9In either case you must enter the Private IP address of the computer or device you wish to port forward to in the

Server IP Address field.

This will be a local IP address in the subnet 192.168.20.xx (by default); where xx can be equal to 2 to 254.

10 Open the Status drop down list and select Enable.

11 Enter the port number or port range into the External Port Start and External Port End fields.

If you only want to open one port, then enter the same number in Start and End port fields, but if you want to open

range of ports, then enter the start number in Port Start field and end number in Port End field.

4 of 4

Port Forwarding Setup Guide

Note that the Internal Port Start and Internal Port End fields will automatically populate with the same port numbers.

12 Select the Protocol to be used for the port forwarding rule: TCP, UDP or TCP/UDP both

13 Click the Apply/Save button.

14 The port forwarding rule will now be added to the list.

This example created in this user guide description is displayed in the bottom row, below.

15 Click on Save/Apply button to save the changes.

Port forwarding is now configured.

You may also Enable/Disable, Add/Remove any rule and apply the changes from this window.

Please note

We recommend that you set a Static IP address on the end device, instead of obtaining one automatically, to make sure that

the request is forwarded to the appropriate machine every individual time.

You can only forward a port to one location (IP address). In some cases, this may cause issues when multiple LAN devices

(computers, game consoles, or VOIP ATAs) attempt to use online gaming at the same time or make multiple VOIP service

connections. In these cases, you will need to use an alternate port for any subsequent connections after the first device.

Please consult your VOIP provider or game manufacturer for assistance with this.

Similarly, remote access and the webserver must have unique port numbers For example, you cannot host a web server

accessible through port 80 of your public IP and enable remote http administration of the NF10WV through port 80, you

must provide both with unique port numbers.

Note also that ports 22456 to 32456 are reserved for RTP protocol in VOIP services. Do not use any of these ports for any

other service.

Andere Handbücher für NF10WV

Inhaltsverzeichnis

Andere NetComm Wireless Tor Handbücher

NetComm Wireless

NetComm Wireless NF18ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF18ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF17ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless 3G29WN2 Bedienungsanleitung

NetComm Wireless

NetComm Wireless Contact NF18ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF10WV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF3ADV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF18ACV Abmessungen

NetComm Wireless

NetComm Wireless NF18ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF18ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF10WV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF17ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF10WV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF18ACV Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung