NetComm Wireless NTC-100 Bedienungsanleitung

Quick Start Guide

NTC-100

4G LTE Cat M1/NB1 Industrial IoT Serial Modem

| Industrial IoT

Quick start guide

This quick start guide will help you set up and connect your device quickly and easily.

More advanced set up instructions can be found in the user guide which can be

downloaded from www.netcommwireless.com/product/m2m/ntc-100.

Package contents

The NTC-100 package includes:

1 x NTC-100

1 x DIN rail mounting bracket

1 x Torx screw

1 x Y-cable

(Nano-t to DE-9 and DC power input)

1 x Quick Start Guide

| Industrial IoT

NTC-100 4G LTE Cat M1/NB1 Industrial IoT Serial Modem

1 x DIN rail mounting bracket

Prerequisites

Depending on your circumstances, you may require some of the following items to

complete the installation of the NTC-100 serial modem:

• An AC/DC power adapter,

-2.1mm centre positive jack,

-100-240V AC : 12V DC/1.5A (used in conjunction

with the included Y-cable)

• A suitable cellular antenna such as the NANT-00001-000

(LTE Tube Antenna)

• A standard USB to USB Micro Type B cable

• Additional screws and fasteners

• A Windows PC or other device with an available serial or USB port

• A terminal emulation client such as PuTTY

• A T6 Torx driver to secure the SIM slot (optional)

| Industrial IoT

Device Overview

Cellular antenna

connector

10-pin NANO-t (locking) connector

(power and serial interface)

84 mm

89 mm

50 mm

| Industrial IoT

NTC-100 4G LTE Cat M1/NB1 Industrial IoT Serial Modem

Reset button

Network

Status

SIM card slot

Micro USB 2.0 port

21 mm

| Industrial IoT

Installation

Connecting the antenna

Connect the antenna to the SMA connector on the NTC-100 serial modem by

placing it on the SMA connector and turning it in a clockwise direction.

| Industrial IoT

NTC-100 4G LTE Cat M1/NB1 Industrial IoT Serial Modem

Inserting the SIM card

1. Lift the cover from the right side. This reveals the Micro USB 2.0 port and the

reset button.

2. Slide the cover to the right to reveal the SIM card slot.

| Industrial IoT

3. Insert the SIM card into the slot with the gold SIM conductor pins facing

down. Push the SIM card in until it locks in place. To remove the SIM card,

push it in again and it will unlock.

4. Slide the cover back to the left and then push the right side closed.

5. To lock the protective cover, fasten the provided Torx screw into the hole

below the SIM card slot on the bottom of the device using a T6 Torx driver.

| Industrial IoT

NTC-100 4G LTE Cat M1/NB1 Industrial IoT Serial Modem

Powering the NTC-100 serial modem via 5V Micro

USB socket

The NTC-100 serial modem features a USB port which can optionally be used for

serial connectivity, terminal emulation or for establishing a PPP internet connection.

The USB port enumerates a number of endpoints after the USB port driver is

installed.

Connect a standard USB to USB Micro Type B cable (not included) between the

NTC-100 serial modem and a powered USB port on your device (e.g. computer).

The USB cable provides the NTC-100 serial modem with power and an emulated

serial port input.

Power and serial communication options

The NTC-100 serial modem may be connected and powered by:

• The built-in 5V Micro USB socket (USB cable not included)

• The 10-pin power/data connector using the included Y-cable.

| Industrial IoT

1. For USB port communication, you must install a driver compatible with the

NTC-100 serial modem’s embedded Quectel BG96 cellular module. The

Windows drivers are available from the NTC-100 serial modem product page

on the NetComm Wireless website (www.netcommwireless.com/product/

m2m/ntc-100).

2. After the download has completed, install the driver by double-clicking on the

downloaded le and following the installer prompts.

3. Open the Control Panel and then Device Manager. The NTC-100 serial

modem appears under Ports with three Quectel USB entries.

The COM port used for each port is displayed in brackets next to each port type.

For terminal access, take note of the COM port assigned to the Quectel USB

AT Port. In the screenshot above, it is COM11. For further instructions, see the

Accessing the NTC-100 via terminal emulator section of this guide.

Inhaltsverzeichnis

Andere NetComm Wireless Modem Handbücher

NetComm Wireless

NetComm Wireless NTC-3000-04 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-3000-01 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NWL-221 Bedienungsanleitung

NetComm Wireless

NetComm Wireless NTC-3000-01 Bedienungsanleitung

NetComm Wireless

NetComm Wireless Contact NF18ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless 3GM2WN Bedienungsanleitung

NetComm Wireless

NetComm Wireless NL1901ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NF17ACV Bedienungsanleitung

NetComm Wireless

NetComm Wireless NB16WV-02 Bedienungsanleitung

NetComm Wireless

NetComm Wireless Contact NF18ACV Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung