NetComm NB16WV Bedienungsanleitung

NB16WV VOIP Setup

Guide

(for Internode)

Configuring yo u r NB16WV for VO I P Service

The following steps will take you through the process of setting up your VOIP connection.

Step 1: Checking Computer Net ork Settings:

You will need to connect your computer directly to your VOIP device (modem or ATA) and set

the network connection on your computer to obtain an IP address automatically. Please follow

the instructions appropriate for your operating system below:

Below are the instructions for setting Windows XP to obtain an IP address automatically for

your ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork Connections”.

(If you only see "Net ork and Internet Connections" open that first and then click on

"Net ork Connections".)

3. Right click on “Local Area Connection” and select “Properties”.

4. Double-click on “Internet Protocol”.

5. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

6. Click “OK” and then click “OK” (or “Close”).

Below are the instructions for setting Windows Vista to obtain an IP address automatically for

your ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork and Sharing Centre”.

(If you only see "Net ork and Internet" open that first and then click on "Net ork and

Sharing Centre".)

3. Click on “Manage net ork connections” (

on the lefthandside of the window

).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

7. Click “OK” and then click “OK” again.

Below are the instructions for setting Windows 7 to obtain an IP address automatically for your

ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork and Sharing Centre”.

(If you only see "Net ork and Internet" open that first and then click on "Net ork and

Sharing Centre".)

3. Click on “Change adapter settings” (

on the lefthandside of the window

).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

7. Click “OK” and then click “OK” again.

Below are the instructions for setting Mac OS X to obtain an IP address automatically for your

ethernet connection:

1. Click on the Apple Menu and go to "System Preferences".

2. Click on "Net ork".

3. Click on “Ethernet” or "Built-in Ethernet".

4. Click on the "Configure" drop-down box and select "Using DHCP" then click

"Apply".

Registrar sip.internode.on.net or as otherwise directed

by Internode.

Use Outbound Server Enable or Disable according to your VoIP

account type. If you are unsure consult

Internode.

Outbound Proxy sip.internode.on.net or as otherwise directed

by Internode.

Subscribe for MWI (Message Waiting Indicator) Enable or disable as per Internode’s

instructions (if the VoIP account has this

feature enabled).

Refresh Time for MWI Leave as default (360) or as per Internode’s

instructions.

MWI Server URL Leave as default or as directed by Internode.

5.

After entering all required fields click on the “Save” button and check the Status at the

bottom of the page. The status should change to “Registered” if all the settings entered

are correct and you have a current connection to the internet.

6. Check for a dial tone on your phone handset. The VoIP account should now be active and

you should now be able to make and/or receive VoIP phone calls (depending on the type

of VoIP account you are using).

Andere Handbücher für NB16WV

7

Inhaltsverzeichnis

Andere NetComm WLAN-Router Handbücher

NetComm

NetComm FIBRE NF3ADV Bedienungsanleitung

NetComm

NetComm 3G15Wn Bedienungsanleitung

NetComm

NetComm NP644 Bedienungsanleitung

NetComm

NetComm NTC-40WV Bedienungsanleitung

NetComm

NetComm 3GM1WN Bedienungsanleitung

NetComm

NetComm LIBERTY 3G22WV Bedienungsanleitung

NetComm

NetComm MyWay 3G8WV Bedienungsanleitung

NetComm

NetComm HSPA+ M2M Bedienungsanleitung

NetComm

NetComm NB12WD Bedienungsanleitung

NetComm

NetComm LIBERTY SERIES Bedienungsanleitung

NetComm

NetComm 4G100W-01 Bedienungsanleitung

NetComm

NetComm 802.11 Bedienungsanleitung

NetComm

NetComm NF10W Bedienungsanleitung

NetComm

NetComm NF7 Bedienungsanleitung

NetComm

NetComm HS900 Bedienungsanleitung

NetComm

NetComm NB604N Bedienungsanleitung

NetComm

NetComm NB5580W Bedienungsanleitung

NetComm

NetComm NetComm Gateway Series Bedienungsanleitung

NetComm

NetComm 3G10WVR Bedienungsanleitung

NetComm

NetComm NWL-25 Bedienungsanleitung

NetComm

NetComm NB12WD Bedienungsanleitung

NetComm

NetComm NB8W Bedienungsanleitung

NetComm

NetComm NP3680W Bedienungsanleitung

NetComm

NetComm NTC-6000 SERIES Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung