NETGEAR EPS90W Bedienungsanleitung

Installation Guide

External Power Adapter

Model EPS90W, EPS130W, and EPS200W

WARNING: Read this document rst before connecting the new

power adapter to a device.

Package contents

• Power adapter

• Power cord (varies by region)

• Installation guide

Flexible PoE power budget

For NETGEAR switches that support a exible PoE budget, you

can increase or decrease the available PoE power. To do this, you

must rst change the PoE power budget setting for the switch and

then connect the new power adapter. For managed switches, log

in to the device management UI to change the PoE power budget.

Unmanaged switches come with a physical PoE power budget

setting on the hardware.

Note: Only connect the power adapter to a compatible NETGEAR

switch listed in the following table.

Switch

Model

Power Adapter

Model

Power Adapter

Wattage

PoE+ Power

Wattage

GC108P and

GC108PP

EPS130W 130W 126W

GS110TPP EPS130W 130W 120W

EPS200W 200W 190W

GS108LP and

GS108PP

EPS90W 90W 83W

EPS130W 130W 123W

GS116LP and

GS116PP

EPS90W 90W 76W

EPS130W 130W 115W

EPS200W 200W 183W

1. Register your power adapter

Use the NETGEAR Insight app to register your new power adapter

(and your switch if you haven’t already) to activate your warranty

and access support.

1. From a computer or mobile device that is connected to the

Internet, visit my.netgear.com.

2. Log in to your NETGEAR account.

If you don’t have a free NETGEAR account, you can create one.

The My Products page displays.

3. From the menu on the left, select Register a Product.

4. In the Serial Number eld, type the serial number of your

switch.

The serial number is 13 digits long. It is printed on the switch

label.

5. From the Date of Purchase menu, select the date that you

purchased the switch.

6. Click the REGISTER button.

Your switch is registered to your NETGEAR account.

A conrmation email is sent to your NETGEAR account email

address.

7. To register your switch, repeat Steps 5–7.

February 2021

Managed switch: Connect the power

adapter and set the new PoE budget

1. Disconnect the current power adapter from your switch.

2. Connect the new power adapter to the switch and plug it in to

an electrical outlet.

3. Launch a web browser on a computer that is on the same

network as the switch.

4. Log in to the local browser interface of the switch.

For information about how to log in, see the user manual for

your switch, which you can download from

https://www.netgear.com/support/.

5. In the System tab, select PoE.

6. Select the power adapter.

7. Click the Apply button.

The PoE budget for the switch is set to that of the new power

adapter.

are trademarks of NETGEAR, Inc. Any non‑NETGEAR

trademarks are used for reference purposes only.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

Unmanaged switch: Change the PoE

budget and connect the power adapter

Follow these steps for switch models that support exible PoE.

1. Power down the switch and disconnect the current power cord.

2. Use a screwdriver to remove the metal plate that covers the

slider.

3. Move the slider to the setting that

corresponds to the wattage of the

new power adapter.

4. Connect the new power adapter

to the switch and plug it in to an electrical outlet.

The switch operates at the PoE budget allowable by the power

adapter.

3.7A (GS116PP)

2.4A

1.66A (GS116LP)

54V

Support and Community

Visit netgear.com/support to get your questions answered and access the latest

downloads.

You can also check out our NETGEAR Community for helpful advice at community.

netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français

canadien à

https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French

at https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity,

visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree, return

the device to your place of purchase within your return period.

Do not use this device outdoors. The PoE source is intended for intra building

connection only. NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

Andere Handbücher für EPS90W

Dieses Handbuch passt für folgende Modelle

Andere NETGEAR Adapter Handbücher

NETGEAR

NETGEAR WAB501 - 802.11a/b Dual Band PC Card Bedienungsanleitung

NETGEAR

NETGEAR RangeMax WN511T Bedienungsanleitung

NETGEAR

NETGEAR RANGEMAX WPN111 Bedienungsanleitung

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PTVU1000 Bedienungsanleitung

NETGEAR

NETGEAR Powerline 1200 Bedienungsanleitung

NETGEAR

NETGEAR XAV1101 - Powerline Ethernet Adapter Bedienungsanleitung

NETGEAR

NETGEAR DST6501 Bedienungsanleitung

NETGEAR

NETGEAR FA511 - 32-bit CardBus PC Card Mobile Bedienungsanleitung

NETGEAR

NETGEAR AX741 - ProSafe Expansion Module Bedienungsanleitung

NETGEAR

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0... Bedienungsanleitung

NETGEAR

NETGEAR A6200 Bedienungsanleitung

NETGEAR

NETGEAR A6150 Bedienungsanleitung

NETGEAR

NETGEAR XAV2101 - POWERLINE AV 200 NANO ADAPTER Bedienungsanleitung

NETGEAR

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR XAVB5501 Bedienungsanleitung

NETGEAR

NETGEAR Powerline PLP2000 Bedienungsanleitung

NETGEAR

NETGEAR WN511B - Next Wireless Pc Card Bedienungsanleitung

NETGEAR

NETGEAR GA311 - Gigabit PCI Adapter Bedienungsanleitung

NETGEAR

NETGEAR XAVB101V2 Bedienungsanleitung

NETGEAR

NETGEAR XAV2501 - Powerline AV Ethernet Adapter Bedienungsanleitung

NETGEAR

NETGEAR WNA1000M Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung

Koolatron

Koolatron AC16 Bedienungsanleitung