NETGEAR WNDA4100 Bedienungsanleitung

Installation Guide

N900 Wireless Dual Band USB Adapter WNDA4100

Package Contents

Resource

N900

Wireless Dual

Band USB

Adapter

USB cable and

adapter cradle

Installation

Estimated completion time: 10 minutes.

1. Insert the Resource CD in your computer’s CD drive. If the CD main screen

does not display, browse the files on the CD and double-click Autorun.exe.

2. Click Setup.

The Software Update Check screen displays.

3. If you are connected to the Internet, click Check for Updates. If not, then click

Install from CD.

4. Click I agree to accept the license agreement and then click Next.

A message displays asking you to

wait while software is installed. This

might take a few minutes. Then you

are prompted to insert your adapter.

5. Either insert the adapter into a USB

port on your computer, or use the

USB cable and adapter cradle

provided to connect the adapter.

The USB cable and adapter cradle

can extend the range of your adapter

and improve wireless reception.

Insert the adapter in the cradle and

attach the USB cable to the

computer.

Note: For best results, put the

wireless adapter at least 4 feet

(1 meter) away from your router.

6. Click Next.

7. NETGEAR Genie displays a list of wireless networks in your area.

Join a Wireless Network

You can join a wireless network from this NETGEAR Genie screen, or you can use

Wi-Fi Protected Setup (WPS) if your wireless network supports it.

• NETGEAR Genie: Click your wireless network to select it from the list, and then

click Connect. If the network is secure, enter its password or network key.

• WPS: Press and hold the WPS button on the side of the adapter for 2 seconds.

Within 2 minutes, press the WPS button on your wireless router or gateway.

December 2011

trademarks or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other

countries. Information is subject to change without notice. Other brand and product names are trademarks or

registered trademarks of their respective holders.

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,

this product should be treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

The adapter joins the network, which can take a few minutes. Your settings are

saved in a profile.

NETGEAR Genie Icon

When you install your adapter, the NETGEAR Genie icon displays in the Windows

system tray and on the desktop. You can double-click this icon to open NETGEAR

Genie to make changes or connect to a different wireless network. The color of the

icon indicates the strength of your wireless connection from 0 (zero) to 5 bars.

Green: 3 to 5 bars

Yellow: 1 or 2 bars

Red: 0 (zero) bars, indicating no connection

If you remove your adapter, NETGEAR Genie is not available, so the icon does not

display. if you insert the adapter again, the icon returns.

Using the USB Cable

You can use the USB cable and adapter cradle to extend the range of your adapter

and obtain better wireless reception. Insert the adapter in the plastic cradle and

attach the USB cable to the adapter and the computer.

Technical Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product,

and use it to register your product at http://www.NETGEAR.com/register.

Registration is required before you can use the telephone support service.

Registration through the NETGEAR website is strongly recommended.

Go to http://support.netgear.com for product updates and web support.

For additional information about setting up, configuring, and using your USB

Wireless Adapter, see the User Manual.

For complete DoC, visit the NETGEAR EU Declarations of Conformity website at

http://support.netgear.com/app/answers/detail/a_id/11621.

For GNU General Public License (GPL) related information, please visit

http://support.netgear.com/app/answers/detail/a_id/2649.

Andere Handbücher für WNDA4100

Inhaltsverzeichnis

Andere NETGEAR Adapter Handbücher

NETGEAR

NETGEAR XAV2501 - Powerline AV Ethernet Adapter Bedienungsanleitung

NETGEAR

NETGEAR XET1001 - Powerline Network Adapter Bedienungsanleitung

NETGEAR

NETGEAR HA501 - 802.11a Wireless 32-Bit Card Bus... Bedienungsanleitung

NETGEAR

NETGEAR WN111v2 - RangeMax Next Wireless USB 2.0... Bedienungsanleitung

NETGEAR

NETGEAR XAVB1601 Bedienungsanleitung

NETGEAR

NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR MA111 Bedienungsanleitung

NETGEAR

NETGEAR WNCE3001 Bedienungsanleitung

NETGEAR

NETGEAR XAV5601 Bedienungsanleitung

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR WN121T - RangeMax Next Wireless-N USB 2.0... Bedienungsanleitung

NETGEAR

NETGEAR A7000 Bedienungsanleitung

NETGEAR

NETGEAR WPN111 - RangeMax Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR RangeMax WNDA3100 Bedienungsanleitung

NETGEAR

NETGEAR A6150 Bedienungsanleitung

NETGEAR

NETGEAR WG111UNA - DOUBLE 108MBPS WRLS USB 2.0 Bedienungsanleitung

NETGEAR

NETGEAR XAV1004 - Powerline AV Adapter Bedienungsanleitung

NETGEAR

NETGEAR A6200 Bedienungsanleitung

NETGEAR

NETGEAR MA111v2 - 802.11b Wireless USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR XAV5004 - POWERLINE AV 500 ADAPTER Bedienungsanleitung

NETGEAR

NETGEAR RangeMax WNDA3100 Bedienungsanleitung

NETGEAR

NETGEAR WPN111 - RangeMax Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR PLP1200 Bedienungsanleitung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung

Koolatron

Koolatron AC16 Bedienungsanleitung