NETGEAR XA601 - Powerline USB Adapter Bedienungsanleitung

Installation Guide

Powerline USB Adapter

MODEL XA601

Introduction

Thank you for purchasing the NETGEAR® Powerline USB Adapter (model XA601). This

Powerline adapter lets you completely network your home by simply plugging into your

existing electrical wiring, so your network connection is as close as your nearest 110-volt

electrical outlet. Now your high-speed cable/DSL connection can be available in every room.

Robust and rate-adaptive, the Powerline adapter minimizes interference from other household

appliances. Go ahead and use your hair dryer, vacuum cleaner or TV -- your network will

automatically find the best data rate so that you can continue surfing, playing games or

telecommuting, safely and reliably.

This installation guide shows you how to connect your Powerline adapter to your PC. Setup is

easy – follow the instructions in this guide and your network will be up and running quickly.

If you have problems, there is a troubleshooting section on page 15 to help you. You can all

also find the latest information online from www.NETGEAR.com. NETGEAR offers

technical support 24 hours a day and 7 days a week on the Web (www.NETGEAR.com), by

e-mail ([email protected]) and by phone (see the provided support information card

for phone numbers).

Home Office

Kids' Room

Kitchen

Powerline Adapter XE602

Internet

Radio

Powerline

Adapter

XE602

Powerline USB Adapter XA601

Router

Cable/DSL

Modem

Installation Overview

Estimated setup time is 10 to 20 minutes for each PC.

1. Unpack the box and verify the contents.

2. Insert the "Driver and Documentation CD" into the CD-ROM drive and install the

software.

3. Connect the power cord.

4. Using the supplied USB cable, connect the Powerline Adapter to the PC.

5. Set the encryption password (optional)

Unpack the Box

When you open the box, verify that you have received everything.

The package includes:

• XA601 Powerline USB Adapter

• Driver and Documentation CD

• 5-ft. USB Cable

• 6-ft power cord

• Vertical Stand with Cable strap

• Wall-mounting screws

•XA601 Installation Guide (this document)

• Warranty and registration card

• Support information card

If you don’t have everything listed above, see the support information card for contact

information. If the support information card is missing, you can get contact information at

www.NETGEAR.com in the Customer Service area.

USB Cable

Stand

110v cord

Powerline USB Adapter

XA601

Powerline USB Adapter (XA601),

Driver and Documentation CD,

installation guide, support

information card & warranty/

registration card. Wall-mounting

screws

Install Drivers and Software

Note: Please install the drivers and software prior to connecting the

Powerline USB adapter to the PC.

1. Insert "Driver and Documentation" CD into the CD-ROM of your PC.

2. The Installation Wizard will start automatically.

3. Once the following dialog box appears, click “Next”.

4. Enter your name and click "Next".

5. When the Following dialog box appears, click "Install" to begin the Installation.

6. Once the Installation is complete, click “Finish” to exit the Wizard.

7. Your will need to restart the computer prior to connecting the Powerline USB adapter to

your PC. Close all other applications and Click “Yes” when the following dialog box

appears.

Prepare to Install the Powerline USB

Adapter

The NETGEAR Powerline USB adapter enables you to set up a home network using your

existing electrical outlets. Computers in different rooms can share the Internet connection as

well as files and printers using the Electrical wiring that’s already in your house. There is no

need for unsightly Ethernet cabling or any rewiring.

You will need one of NETGEAR’s Powerline adapters in each room that you want part of the

home network. The Powerline USB Adapter (model XA601) connects any PC with a USB

port to the Powerline network. The Powerline Ethernet Adapter (model XE602) can easily

connect to any device with a 10BaseT or a 10/100 Mbps Ethernet port such as a Cable/DSL

router.

In order to share your Cable or DSL connection among PCs in different rooms, you will need

the following:

• Cable or DSL Modem

• Cable/DSL Gateway Router (such as the NETGEAR RP614 or XR814)

• A Powerline Ethernet Adapter (model XE602) connected to the Router (unless you are

using a fully integrated NETGEAR XR814 Powerline Cable/DSL router)

Home O

ome O

ffice

Powerline

Adapter

XE602

Router

Cable/DSL

Modem

For each PC that you want to connect to the network, you will need:

• A Powerline USB Adapter (model XA601), if the PC lacks an Ethernet port but supports

a USB port

• A Powerline Ethernet Adapter (model XE602), if the PC has an existing Ethernet port or

you are about to install a 10/100 Mbps Ethernet Network Card.

Kids' Room

Powerline USB Adapter XA601

Install the Powerline USB Adapter

After installing the drivers, you are ready to install the Powerline USB adaptor.

Note: If you have not installed the drivers, please follow the steps described

in Section 2:“Install Drivers and Software”.

Decide where you wish to place the Powerline USB adapter.

• It can be placed horizontally on a desk or tabletop.

• It can be mounted on the wall using the enclosed wall mounting kit

• It can be placed in the vertical stand, in order to save desk space

Powerline USB Adapter XA601

on Vertical Stand

Andere Handbücher für XA601 - Powerline USB Adapter

Inhaltsverzeichnis

Andere NETGEAR Adapter Handbücher

NETGEAR

NETGEAR XAVB5501 Bedienungsanleitung

NETGEAR

NETGEAR WNA1100 - Wireless-N 150 USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

NETGEAR

NETGEAR XAV101 - Powerline AV EN Adapter Bridge Bedienungsanleitung

NETGEAR

NETGEAR XAV5101 Bedienungsanleitung

NETGEAR

NETGEAR HDX111 - Powerline HD Plus Ethernet Adapter Bedienungsanleitung

NETGEAR

NETGEAR A6210 Bedienungsanleitung

NETGEAR

NETGEAR RANGEMAX WPN111 Bedienungsanleitung

NETGEAR

NETGEAR XAV5004 - POWERLINE AV 500 ADAPTER Bedienungsanleitung

NETGEAR

NETGEAR XAVB5501 Bedienungsanleitung

NETGEAR

NETGEAR PTV1000 - Push2TV - TV Adapter Bedienungsanleitung

NETGEAR

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0... Bedienungsanleitung

NETGEAR

NETGEAR WG111T - 108 Mbps Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR Powerline PLP2000 Bedienungsanleitung

NETGEAR

NETGEAR XAV5001 - Powerline AV 500 Adapter Bedienungsanleitung

NETGEAR

NETGEAR MCA1001 - MoCA Coax-Ethernet Adapter Bedienungsanleitung

NETGEAR

NETGEAR MA111 Bedienungsanleitung

NETGEAR

NETGEAR WN121T - RangeMax Next Wireless-N USB 2.0... Bedienungsanleitung

NETGEAR

NETGEAR Powerline PL1200 Bedienungsanleitung

NETGEAR

NETGEAR WG111U - Double 108 Mbps Wireless USB 2.0... Bedienungsanleitung

NETGEAR

NETGEAR RB-WPN111NA Bedienungsanleitung

NETGEAR

NETGEAR WG121 - 54 Mbps Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR PA101 Bedienungsanleitung

NETGEAR

NETGEAR GA620 - PCI Fiber Card Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung

Koolatron

Koolatron AC16 Bedienungsanleitung