NETGEAR WG511v1 - 54 Mbps Wireless PC Card 32-bit... Bedienungsanleitung

Installation Guide

Follow these quick steps to install your WG511

These basic setup instructions assume that you will connect to a wireless

access point or wireless router, and you are not using WEP security. Please

refer to the online help and the Reference Manual on your CD for

instructions on configuring WEP, Ad-hoc mode, or advanced options.

Estimated Completion Time: 5-15 minutes for each notebook PC.

Windows XP Installation

1First, Install the WG511 Software

a. Power on your notebook, let the operating system boot up

completely, and log in as needed.

b. Insert the Resource CD for the WG511 into your CD-ROM

drive. The CD main page shown below will load.

c. Click the Install Driver & Utility link.

d. Follow the InstallShield Wizard steps, and click Finish when

done to restart your computer.

2Next, Install the WG511 Wireless PC Card

a. Hold the PC Card with the NETGEAR logo facing up and

insert it into a CardBus slot. After a short delay, the Found New

Hardware Wizard displays.

b. Next you will be prompted to enable the NETGEAR Smart

Wireless Settings Utility configuration utility.

Click Yes to accept this option.

If you choose No, you must read the Windows XP documentation

for an explanation of how to use the Windows XP wireless

network configuration utility.

You will also be prompted to choose the country you are located

in. Select your location from the nlist.

c. Click Finish to complete the installation. You will see the

WG511 system tray icon on the lower right portion of the

Windows task bar.

3Now, Configure Your WG511 and Save the Profile

a. Click the icon in the Windows system tray to open the

WG511 Smart Wireless Settings Utility.

The utility opens to the Settings tab page.

b. Change the Network Name SSID to match your network.

Tip: To view the available wireless networks, use the drop-down

list or the Networks tab and choose the one you want.

c. Click Apply to activate the connection.

Tip: Create work and home profiles. Then, activate whichever

one you need for your current location.

Note: The status bar at the bottom of the utility reports the speed of

your connection. 54 Mbps speed is only possible when your wireless

network has a 54 Mbps access point such as the NETGEAR

WGR614 54 Mbps Wireless Router.

4Finally, Verify Wireless Network Connectivity

a. Verify that the status monitor information at the bottom of the

utility matches your wireless network.

b. Check the WG511 LEDs: Green (Link light) – blinking

indicates the WG511 is trying to establish a connection but is

unable to do so; Amber (Activity light) – blinking indicates the

WG511 has a connection and is transmitting or receiving data.

c. Verify connectivity to the Internet or network resources.

Note: If you are unable to connect, see the Troubleshooting

Chapter of the Reference Manual on the Resource CD.

54 Mbps Wireless PC Card WG511

Installation Guide

Note: If a Windows XP logo

testing warning appears, click

Continue Anyway to proceed.

Windows 2000, ME/98SE Installation

1First, install the WG511 software

a. Power on your notebook, let the operating system boot up

completely, and log in as needed.

b. Insert the Resource CD for the WG511 into your CD-ROM

drive. The CD main page shown below will load.

c. Click the Install Driver & Utility link.

d. Follow the InstallShield Wizard steps, click Finish when done,

and if prompted, restart your computer.

2Next, install the WG511 Wireless PC Card

a. Hold the PC Card with the NETGEAR logo facing up and

insert it into a CardBus slot. After a short delay, the Found New

Hardware Wizard displays.

b. Follow the Found New Hardware Wizard steps, click Finish

when done, and if prompted, restart your computer.

c. Next, you will be prompted to choose the country where you are

located. Select your location from the list.

You will now see the WG511 system tray icon in the lower

right area of the Windows task bar.

3Now, configure your WG511 and save the Profile

a. Open the WG511 Smart Wireless Settings Utility by clicking on

the icon in the Windows system tray.

The utility opens to the Settings tab page.

b. Change the Network Name SSID to match your network.

Tip: To view the available wireless networks, use the drop-down

list or the Networks tab and choose the one you want.

c. Click Apply to activate the connection.

Tip: Create work and home profiles. Then, activate whichever

one you need for your current location.

Note: The status bar at the bottom of the utility reports the speed of

your connection. 54 Mbps speed is only possible when your wireless

network has a 54 Mbps access point such as the NETGEAR

WGR614 54 Mbps Wireless Router.

May 2004

*201-10170-01*

201-10170-01

Everybody's connecting are trademarks or registered trademarks of Netgear, Inc. in the

United States and/or other countries. Microsoft and Windows are registered trademarks of

Microsoft Corporation in the United States and/or other countries. Other brand and

product names are trademarks or registered trademarks of their respective holders.

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT

SHIPPED WITH YOUR PRODUCT.

By registering your product at www.NETGEAR.com/register, we can pro-

vide you with faster expert technical support and timely notices of product

and software upgrades.

Attention: This device may be used throughout the

European community. Some restrictions may apply

in France and Italy.

0336

Note: If a Windows 2000

displays a Digital Signature

Not Found warning, click Yes

to continue the installation.

4Finally, verify wireless network connectivity

a. Verify that the status monitor information at the bottom of the

utility matches your wireless network

b. Check the WG511 LEDs: Green (Link light) – blinking

indicates the WG511 is trying to establish a connection but is

unable to do so; Amber (Activity light) – blinking indicates the

WG511 has a connection and is transmitting or receiving data.

c. Verify connectivity to the Internet or network resources.

Note: If you are unable to connect, see the Troubleshooting Chapter of

the Reference Manual on the Resource CD.

Andere Handbücher für WG511v1 - 54 Mbps Wireless PC Card 32-bit...

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Computerhardware Handbücher

NETGEAR

NETGEAR WG511 - Only Wireless Pccard Nic 54MBPS Bedienungsanleitung

NETGEAR

NETGEAR WGM511 Bedienungsanleitung

NETGEAR

NETGEAR WPN511 - RangeMax Wireless PC Card Bedienungsanleitung

NETGEAR

NETGEAR MA401 - 802.11b Wireless PC Card Bedienungsanleitung

NETGEAR

NETGEAR WG511 Bedienungsanleitung

NETGEAR

NETGEAR WPN511 - RangeMax Wireless PC Card Bedienungsanleitung

NETGEAR

NETGEAR WAG511 - 802.11a/b/g Dual Band Wireless PC... Bedienungsanleitung

NETGEAR

NETGEAR WG511U - Double 108Mbps Wireless A+G PC Card Bedienungsanleitung

NETGEAR

NETGEAR WG511T Bedienungsanleitung

NETGEAR

NETGEAR WG511T Bedienungsanleitung

NETGEAR

NETGEAR MA401 - 802.11b Wireless PC Card Bedienungsanleitung

NETGEAR

NETGEAR WAG511 - 802.11a/b/g Dual Band Wireless PC... Bedienungsanleitung

NETGEAR

NETGEAR WAB501 - 802.11a/b Dual Band PC Card Bedienungsanleitung

NETGEAR

NETGEAR WAG511 - 802.11a/b/g Dual Band Wireless PC... Bedienungsanleitung

NETGEAR

NETGEAR WG511U - Double 108Mbps Wireless A+G PC Card Bedienungsanleitung

NETGEAR

NETGEAR WG511U - Double 108Mbps Wireless A+G PC Card Montage- und Wartungsanleitung

NETGEAR

NETGEAR WG511v2 Bedienungsanleitung

NETGEAR

NETGEAR WG511v2 Bedienungsanleitung

NETGEAR

NETGEAR WG511T Bedienungsanleitung

NETGEAR

NETGEAR RangeMax Next WN711 Bedienungsanleitung

NETGEAR

NETGEAR WG511NA - Wireless G Pc Card Bedienungsanleitung

NETGEAR

NETGEAR WG511 Bedienungsanleitung

NETGEAR

NETGEAR WG511T Bedienungsanleitung

NETGEAR

NETGEAR WG511V2H1 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung