NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet... Bedienungsanleitung

Installation Guide

ProSafe 8-Port Gigabit VPN Firewall FVS318G

Follow these instructions to set up your VPN firewall.

•For cable modem service. You must set up the VPN firewall using the same

computer you used when you first set up your internet connection.

•For DSL service. To set up the VPN firewall, you might need information such

as your DSL service login name and password.

Package Contents

The VPN firewall package contains:

•FVS318G VPN Firewall

•Ethernet cable

•Rubber feet

•Power adapter

•Installation guide

•Resource CD

Connect the VPN Firewall

1. Connect the cables between the VPN Firewall, computer, and modem.

a. Turn off your computer.

b. Turn off and unplug the modem.

c. Locate the cable (modem cable in the diagram) that connects your modem

and computer.

d. Disconnect the cable at the computer end only, point Ain the diagram.

e. Insert the cable from your modem into the WAN port of the VPN firewall as

shown in point B of the second diagram.

f. Insert the cable that came with your VPN firewall (the NETGEAR cable in

the next diagram) into a LAN port on the VPN firewall, such as LAN

port 1 (point C in the diagram). Insert the other end into the LAN port of

your computer (point D in the diagram).

Your cables are connected, and you are ready to restart your network.

2. Restart your network in the correct sequence.

WARNING: Failure to restart your network in the correct sequence could prevent

you from connecting to the Internet.

a. Pug in the power cord to your modem, turn it on, and wait 2 minutes.

b. Plug in the power cord to your VPN firewall, turn it on, and wait 1 minute.

c. Turn on your computer.

Modem

Modem cable

Internet

Computer

LAN ports

VPN Firewall

NETGEAR

cable

Internet

Modem

WAN port

Note: For DSL customers, if ISP-provided software logs you in to the Internet, do not

run that software. You might need to disable auto dialing in your browser.

d. To verify that the VPN network is operating correctly check the VPN firewall

LEDs:.Power.The Power LED should turn solid green. If it does not turn

solid green, check that the power adapter is connected to an AC outlet.

•Test. The Test LED lights when the router is first turned on and then goes

off. If after 2 minutes it is still lit, see the Troubleshooting Tips in this guide.

•WAN. The WAN port LED should be lit. If it is not, make sure that the

Ethernet cable is attached to the VPN firewall WAN port and the modem.

Also, make sure that the modem is powered on.

•LAN. Each LAN port has two LEDs. The green LED on the upper left

indicates network activity. The right LED indicates communication speed.

It is green for 1000 Mbps, amber for 100 Mbps, and off for 10 Mbps. If the

LAN port LED is not on, check that the Ethernet cable from the computer

to the firewall is attached at both ends, and that the computer is on.

Configure the VPN Firewall for Internet

Access

Use your browser to access and configure the VPN firewall.

1. From the computer, open a browser such as Internet Explorer. With the VPN

firewall in its factory default state, type http://192.168.1.1 in the browser

address bar and click Enter. The login screen displays.

Power

LAN Ports WAN

Test

FVS318G_IG.fm Page 1 Thursday, December 20, 2012 10:42 AM

December 2012

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to

change without notice. Other brand and product names are registered trademarks or trademarks of their

Intended for indoor use only in all EU member states, EFTA states, and Switzerland.

2. Enter admin as the user name and password for the password, both in

lowercase letters, and click Login. The Router Status screen displays.

3. If you need to change settings, select Network Configuration, enter settings

for your network, and click Apply.

4. You can click Broadband Status in the upper right of the screen to display the

Connection Status screen.

5. If you are not connected, click renew on the Connection Status screen to

connect to the network.

Troubleshooting Tips

Make sure that the WAN settings are correct.

Some cable modem ISPs require you to use the MAC address of the computer

registered on the ISP account. The VPN firewall automatically detects your

computer MAC address. If you are not using the computer registered with your ISP,

you can manually enter the correct MAC address.

1. Select Network Configuration > WAN Settings.

The Broadband Settings screen displays.

2. Click the Advanced option arrow in the upper right of the screen.

The Broadband Advanced Options screen displays.

3. Select Use this MAC Address and enter the MAC address registered with

your ISP.

4. Click Apply.

Technical Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and

use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website.

For product updates, documentation, and support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support

resources.

You can get the reference manual online at http://downloadcenter.netgear.com or

through a link in the product user interface.

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

FVS318G_IG.fm Page 2 Thursday, December 20, 2012 10:42 AM

Andere Handbücher für FVS318G - ProSafe Gigabit VPN Firewall Data Sheet...

Inhaltsverzeichnis

Andere NETGEAR Firewall Handbücher

NETGEAR

NETGEAR FVG318 - ProSafe 802.11g Wireless VPN Firewall 8... Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE SRX5308 Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE FVS318G v2 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVS318N Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Montage- und Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

NETGEAR

NETGEAR FVG318 - ProSafe 802.11g Wireless VPN Firewall 8... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FWAG114 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FM114P Bedienungsanleitung

NETGEAR

NETGEAR FVG318 - ProSafe 802.11g Wireless VPN Firewall 8... Bedienungsanleitung

NETGEAR

NETGEAR FVS318 - ProSafe VPN Firewall Router Bedienungsanleitung

NETGEAR

NETGEAR FVX538v1 - ProSafe VPN Firewall Dual WAN Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE FVS336G v3 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVS318N Bedienungsanleitung

NETGEAR

NETGEAR FVS124G - ProSafe VPN Firewall 25 Bedienungsanleitung

NETGEAR

NETGEAR SRXN3205 - ProSafe Wireless-N VPN Firewall Wireless... Bedienungsanleitung

NETGEAR

NETGEAR FVL328 - Cable/DSL ProSafe VPN Firewall... Bedienungsanleitung

NETGEAR

NETGEAR FWG114P - ProSafe 802.11g Wireless Firewall Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVM318 Bedienungsanleitung

NETGEAR

NETGEAR FVS318G-100NAS Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE FVS336G v3 Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung

GTA

GTA GB-200 Bedienungsanleitung