NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Montage- und Bedienungsanleitung

Andere Handbücher für FVS338 - ProSafe VPN Firewall 50 Router

7

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere NETGEAR Firewall Handbücher

NETGEAR

NETGEAR FVL328 - Cable/DSL ProSafe VPN Firewall... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVS318N Bedienungsanleitung

NETGEAR

NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Bedienungsanleitung

NETGEAR

NETGEAR FVS336G - ProSafe Dual WAN Gigabit Firewall Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVS318v3 Bedienungsanleitung

NETGEAR

NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN... Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE SRX5308 Bedienungsanleitung

NETGEAR

NETGEAR FVS124G - ProSafe VPN Firewall 25 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVS318N Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE SRX5308 Bedienungsanleitung

NETGEAR

NETGEAR FVG318 - ProSafe 802.11g Wireless VPN Firewall 8... Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FWAG114 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FM114P Bedienungsanleitung

NETGEAR

NETGEAR FVL328 - Cable/DSL ProSafe VPN Firewall... Installationsanleitung

NETGEAR

NETGEAR FVS328 - ProSafe VPN Firewall Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE SRX5308 Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVS114 Bedienungsanleitung

NETGEAR

NETGEAR FVS318G-100NAS Bedienungsanleitung

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe VPN Firewall 200 FVX538 Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung

GTA

GTA GB-200 Bedienungsanleitung

Application Note

Creating a VPN Policy for the FVX538 or FVS338

ProSafe® VPN Firewall with a Remote Endpoint of

0.0.0.0

Summary

This application note describes how to configure a VPN policy to support a remote

gateway IP set to 0.0.0.0.on one WAN interface of a NETGEAR FVX538 or FVS338

ProSafe VPN Firewall. This is an updated version using the version 2.x router firmware.

Procedure

This application note describes how to create a VPN Client policy using the VPN Wizard

and then editing that policy to set a remote endpoint of 0.0.0.0. It also describes how to

set the remote endpoint to 0.0.0.0. for VPN policies that were manually created.

This procedure was tested using the following:

•NETGEAR FVX538 ProSafe VPN Firewall with version V 2.x firmware

oIP address subnet: 192.168.1.1; 255.255.255.0

Using the VPN Wizard to Create a VPN Policy

VPN menu, select the VPN Wizard submenu.1. From the

Select the VPN client radio button.

2.

3. Type the connection name and preshared key.

4. Click Apply.

Verifying the IKE and VPN policy

1. From the VPN menu, select Policies.

2. Select the VPN Policies tab to verify that the VPN policy is in the list.

3. Select the IKE Policies tab to verify that the IKE policy is in the list.

Modifying the Remote Endpoint Address

1. From the VPN menu, select the Policies submenu.

2. Select the VPN Policies tab, and click Edit for the VPN policy you created (in this

example conn1)..

3. From the Edit VPN Policy screen, under Remote Endpoint, select the FQDN radio

button, and then change the address from fvx_remote.com to 0.0.0.0.

4. Select the IKE Policies tab to verify that the VPN policy of 0.0.0.0 is in the list.

Setting the Remote Endpoint Address for a Manually Created VPN

Policy

After you manually add an IKE and VPN policy, you can manually set the remote

endpoint address.

To manually set the remote endpoint address:

1. From the VPN menu, select the Policies submenu.

2. Select the VPN Policies tab, and then click Edit for the VPN policy you want to edit

(in this example, conn1.).

3. When the Edit VPN Policy screen displays, set the Remote Endpoint to FQDN,

and type 0.0.0.0

4. From the Remote IP drop-down menu, select Any.

If these two fields are configured correctly, the policy will appear as a policy with an * in

the IKE and VPN policy tables showing that they are configured as client policies. If the

FQDN field contains 0.0.0.0, the behavior of this policy will be identical to a policy

configured using the VPN Wizard.

Conclusion

This configuration can support remote endpoint having dynamic IP address without using

an FQDN name.

November 27, 2006

Copyright © 2006 NETGEAR®