NETGEAR FS700TS Bedienungsanleitung

Andere Handbücher für FS700TS

1

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR GSM7248R - ProSafe Switch Handbuch

NETGEAR

NETGEAR GS308 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS104 Bedienungsanleitung

NETGEAR

NETGEAR JGS524FNA Bedienungsanleitung

NETGEAR

NETGEAR GSM7224 - Switch Handbuch

NETGEAR

NETGEAR FS605 v3 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS504 Bedienungsanleitung

NETGEAR

NETGEAR GS524T - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart... Handbuch

NETGEAR

NETGEAR FS728TS - ProSafe Smart Switch Handbuch

NETGEAR

NETGEAR Nighthawk GS808E Bedienungsanleitung

NETGEAR

NETGEAR ProSafe JGSM7224 Handbuch

NETGEAR

NETGEAR FS2105 Bedienungsanleitung

NETGEAR

NETGEAR FS108 - ProSafe 10/100 Desktop Switch Bedienungsanleitung

NETGEAR

NETGEAR FSM7328S - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe JGS524v2 Stücklistenhandbuch

NETGEAR

NETGEAR EN104 - Hub - EN Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE S3300 Handbuch

NETGEAR

NETGEAR M6100 Series Bedienungsanleitung

NETGEAR

NETGEAR MS510TX Handbuch

NETGEAR

NETGEAR XS728T ProSAFE Handbuch

NETGEAR

NETGEAR EN516 - Hub - EN Bedienungsanleitung

NETGEAR

NETGEAR FA311 - 10/100Mbps PCI Ethernet Interface... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS104 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

FS700TS switch –Configuring VLANs (single unit)

VLAN-Definition

VLANs are logical subgroups within a Local Area Network (LAN), which combine user stations,

and network devices into a single unit, regardless of the physical LAN segment to which they are

attached. VLANs allow network traffic to flow more efficiently within subgroups. VLANs use

software to reduce the amount of time it takes for network changes, additions, and moves to be

implemented.

Notes when setting-up VLANs

• A VLAN does not have a minimum number of port

• VLANs work at the OSI Layer 2

• A VLAN can be created per unit, device or via logical connection/combination

• Broadcast and Multicast traffic is transmitted only in the VLAN in which traffic is generated.

• To allow traffic between VLAN a device working at protocol level (Layer 3) is required

VLAN-Tagging

VLAN tagging provides a method of transferring VLAN information between VLAN groups. VLAN

tagging attaches a 4-byte tag to packet headers. The VLAN tag indicates to which VLAN the

packets belong. VLAN tags are attached to the VLAN by either the end station or the network

device. VLAN tags also contain VLAN network priority information.

Creating a new VLAN

Working instructions

1) Log on to the device using the Smart Wizard or via the URL http://<<switchaddress>>

2) Browse to Switch –VLAN - Properties (Note: VLAN1 cannot be modified)

3) Click on Add

4) Set the VLAN ID and VLAN name

5) Click Apply

Assign ports to a VLAN

1) Browse to VLAN –Membership

2) From the VLAN ID list –select the VLAN you want to add ports to (by default all the

ports are members of VLAN1)

- Each port has a Current and Static box associated with -

3) Click on the Static box correspondent to the port until this show a U (Untagged)

symbol

4) Repeat point 3) for all the ports that are required to be member of the VLAN

5) Click Apply when completed

6) Browse to Interface PVID settings and set the PVID of each port assigned to the new

VLAN to the VLAN ID (for VLAN2 PVID = 2 , for VLAN3 PVID = 3….)

7) Click on Apply to finalise the changes

Verify the VLAN is working

Working instructions

1) Configure two PCs with unique IP address (within the same range) and same subnet

mask

2) Patch each PC in one of the ports that are members of the VLAN you wish to test

3) You should now be able to ping each machine from the other

4) Re-patch one of the machines to a port on a different VLAN

5) You should not be able to ping such machine from the others

Setting-up a VLAN (Web-GUI)

1) Log on to the device using the Smart Wizard or via the URL http://<<switchaddress>>

2) Browse to Switch –VLAN - Properties (Note: VLAN1 cannot be modified)

3) Click on Add

4) Set the VLAN ID and VLAN name

5) Click Apply

Assign ports to a VLAN (Web-GUI)

1) Browse to VLAN –Membership

2) From the VLAN ID list –select the VLAN you want to add ports to (by default all the

ports are members of VLAN1)

- Each port has a Current and Static box associated with -

3) Click on the Static box correspondent to the port until this show a U (Untagged)

symbol

4) Repeat point 3) for all the ports that are required to be member of the VLAN

5) Click Apply when completed

6) Browse to Interface PVID settings and set the PVID of each port assigned to the new

VLAN to the VLAN ID (for VLAN2 PVID = 2 , for VLAN3 PVID = 3….)

7) Click on Apply to finalise the changes