NETGEAR GS108T - ProSafe - Gigabit Smart Switch Handbuch
202-10562-01
January 2010
v1.0
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, California 95134 USA
GS108T Hardware
Installation Guide
ii
v1.0, January 2010
© 2010 by NETGEAR, Inc. All rights reserved.
Trademarks
NETGEAR, the NETGEAR logo, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product
names are registered trademarks or trademarks of their respective holders. Portions of this document are copyright
Intoto, Inc.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the GS108T Smart Switch has been suppressed in accordance with the conditions set out in the
BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in
accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating
instructions.
The Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
Product and Publication Details
Model Number: GS108T
Publication Date: January 2010
Product Family: Smart Switch
Product Name: GS108T Smart Switch
Home or Business Product: Business
Language: English
Publication Part Number: 202-10562-01
Publication Version Number: 1.0
Contents iii
v1.0, January 2010
Contents
GS108T Hardware Installation Guide
About This Manual
Conventions, Formats and Scope .....................................................................................v
How to Print this Manual ................................................................................................... vi
Revision History ............................................................................................................... vii
Chapter 1
Introduction
Overview .........................................................................................................................1-1
Features .........................................................................................................................1-2
Green Features ........................................................................................................1-3
Package Contents ..........................................................................................................1-3
Chapter 2
Physical Description
GS108T Front and Back Panel Configuration ................................................................2-1
LED Designations ...........................................................................................................2-2
Port LEDs .................................................................................................................2-2
System LEDs ...........................................................................................................2-3
Device Hardware Interfaces ...........................................................................................2-3
RJ-45 Ports ..............................................................................................................2-3
Powered-Device Port ...............................................................................................2-3
Reset Button ............................................................................................................2-4
Factory Defaults Button ............................................................................................2-4
Chapter 3
Applications
Desktop Switching ..........................................................................................................3-1
iv Contents
v1.0, January 2010
Chapter 4
Installation
Step 1: Preparing the Site ..............................................................................................4-1
Step 2: Installing the Switch ...........................................................................................4-2
Installing the Switch on a Flat Surface .....................................................................4-2
Wall Mounting the Switch .........................................................................................4-2
Step 3: Checking the Installation ....................................................................................4-3
Step 4: Connecting Devices to the Switch ......................................................................4-3
Step 5: Applying Power ..................................................................................................4-4
Using an AC Power Source .....................................................................................4-4
Using a PoE Power Source ......................................................................................4-4
Step 6: Managing the Switch using a Web Browser or the PC Utility .............................4-5
Appendix A
Troubleshooting
Troubleshooting Chart ................................................................................................... A-1
Additional Troubleshooting Suggestions ....................................................................... A-2
Network Adapter Cards ...........................................................................................A-2
Configuration ........................................................................................................... A-2
Switch Integrity ........................................................................................................ A-2
Auto-Negotiation ..................................................................................................... A-3
Appendix B
Technical Specifications
Index
v
v1.0, January 2010
About This Manual
The NETGEAR®ProSafeTM GS108T Hardware Installation Guide describes how to install and
power on the GS108T Smart Switch. The information in this manual is intended for readers with
intermediate computer and Internet skills.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
•Typographical Conventions. This manual uses the following typographical conventions:
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
•Formats. This manual uses the following formats to highlight special messages:
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
Note: This format is used to highlight information of importance or special interest.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
GS108T Hardware Installation Guide
vi About This Manual
v1.0, January 2010
•Scope. This manual is written for the GS108T Smart Switch according to these specifications:
Product Version GS108T Smart Switch
Manual Publication Date January 2010
Note: Product updates are available on the NETGEAR, Inc. website at
http://kbserver.netgear.com/main.asp.
How to Print this Manual
Your computer must have the free Adobe Acrobat reader installed in order to view and print PDF
files. The Acrobat reader is available on the Adobe Web site at
http://www.adobe.com.
•Printing a PDF Chapter. Use the PDF of This Chapter link at the top left of any page.
– Click the PDF of This Chapter link at the top left of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
– Click the print icon in the upper left of your browser window.
•Printing a PDF version of the Complete Manual. Use the Complete PDF Manual link at the
top left of any page.
– Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
– Click the print icon in the upper left of your browser window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
GS108T Hardware Installation Guide
About This Manual vii
v1.0, January 2010
Revision History
Part Number Version
Number Date Description
202-10248-01 1.0 March 2007 Initial release
202-10562-01 1.0 January 2010 Hardware v2.0 and new software features including:
• DoS protection
• DHCP filtering
• Voice VLAN
• Auto-VoIP
• DiffServ
• MAC filtering
• Protected ports
• MAC and standard/extended IP ACLs
GS108T Hardware Installation Guide
viii About This Manual
v1.0, January 2010
1-1
v1.0, January 2010
Chapter 1
Introduction
Congratulations on the purchase of your GS108T Gigabit Smart Switch. The GS108T Smart
Switch is a state-of-the-art, high-performance, IEEE-compliant network solution designed for
users who require a small desktop switch and want the power of Gigabit connectivity to eliminate
bottlenecks, boost performance, and increase productivity. To simplify installation, the switch is
shipped ready for use out of the box.
This chapter serves as an introduction to the GS108T Smart Switch and provides the following
information:
•Overview
•Features
•Package Contents
Overview
This Installation Guide is for the GS108T Gigabit Smart Switch. This product offers support for
eight 10/100/1000 Mbps auto-sensing ports.
Using Gigabit ports, high-speed connections can be made to a server or network backbone. For
example:
• Linking to high-speed servers
• Providing 10/100/1000 Mbps copper connectivity
The GS108T Smart Switch also provides the benefit of administrative management with a
complete package of features for the observation, configuration, and control of the network. With a
Web-based Graphical User Interface (GUI), the switch’s many capabilities can be viewed and used
in a simple and intuitive manner. The switch’s management features include configuration for port
and switch information, VLAN for traffic control, port trunking for increased bandwidth, and
Class of Service (CoS) for traffic prioritization. These features provide better understanding and
control of the network. Initial discovery of the switch on the network requires the Smart Control
Center program, a utility that runs on a PC.
GS108T Hardware Installation Guide
1-2 Introduction
v1.0, January 2010
The GS108T Smart Switch is a free-standing switch. It is IEEE-compliant and offers low latency
for high-speed networking. All ports can automatically negotiate to the highest speed. This
capability makes the switch ideal for environments that have a mix of Ethernet, Fast Ethernet, or
Gigabit Ethernet devices. In addition, all RJ-45 ports operate in half-duplex or full-duplex mode.
The maximum segment length is 328 feet (100 meters) over Category 5 Unshielded Twisted-Pair
(UTP) cable.
Features
The following list identifies the key features of the GS108T Smart Switch.
• Eight RJ-45 10/100/1000 Mbps auto sensing Gigabit switching ports.
• The devices support full NETGEAR Smart Switch functionality.
• The devices provide full compatibility with IEEE standards:
• IEEE 802.3i, (10BASE-T)
• IEEE 802.3u (100BASE-TX)
• IEEE 802.3ab (1000BASE-T)
• IEEE 802.3x (Full-duplex flow control)
• IEEE 802.3af (Power over Ethernet)
• Auto-sensing and auto-negotiating capabilities for all ports.
• Auto Uplink™ on all ports to make the right connection.
• Automatic address learning function to build the packet-forwarding information table. The
table contains up to 4K Media Access Control (MAC) addresses.
• Store-and-Forward transmission to remove bad packets from the network.
• Full-duplex IEEE 802.3x pause frame flow control.
• Active flow control to minimize packet loss/frame drops.
• Half-duplex back-pressure control.
• Per port LEDs, power LED.
• NETGEAR Green product series.
• External 12V/1A PA or power obtained from IEEE 802.3af PSE.
Andere Handbücher für GS108T - ProSafe - Gigabit Smart Switch
2
Inhaltsverzeichnis
Andere NETGEAR Schalten Handbücher
NETGEAR
NETGEAR Universal Pro XS508M Bedienungsanleitung
NETGEAR
NETGEAR FSM726E - ProSafe Switch Handbuch
NETGEAR
NETGEAR GS418TPP Bedienungsanleitung
NETGEAR
NETGEAR ProSafe GSM7252PS Bedienungsanleitung
NETGEAR
NETGEAR ProSafe GS108 Bedienungsanleitung
NETGEAR
NETGEAR GS324P Bedienungsanleitung
NETGEAR
NETGEAR ProSafe GS504 Bedienungsanleitung
NETGEAR
NETGEAR XS728T ProSAFE Bedienungsanleitung
NETGEAR
NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable... Bedienungsanleitung
NETGEAR
NETGEAR DS104NA Bedienungsanleitung
NETGEAR
NETGEAR ProSafe GS510TP Bedienungsanleitung
NETGEAR
NETGEAR ProSAFE GS116Ev2 Bedienungsanleitung
NETGEAR
NETGEAR ProSafe GS510TP Bedienungsanleitung
NETGEAR
NETGEAR WFS709TP - ProSafe Smart Wireless Controller Bedienungsanleitung
NETGEAR
NETGEAR GC752XP Handbuch
NETGEAR
NETGEAR GSM7312 - ProSafe Layer 3 Managed Gigabit... Bedienungsanleitung
NETGEAR
NETGEAR GS724T - ProSafe Switch Bedienungsanleitung
NETGEAR
NETGEAR FSM7352S - ProSafe Switch Bedienungsanleitung
NETGEAR
NETGEAR GS524T - ProSafe Switch Bedienungsanleitung
NETGEAR
NETGEAR GSM7248 - ProSafe Switch Bedienungsanleitung
