NETGEAR GS308PP Bedienungsanleitung

Installation Guide

8-port Gigabit Ethernet Unmanaged

High-Power PoE+ Switch with FlexPoE

Model GS308PP

Package contents

• Switch

• Power cord (varies by region)

• Power Adapter (90W)

• Wall installation kit

• Rubber feet

• Mounting ties (for power adapter)

• Installation guide

1. Search for NETGEAR Insight and download the latest app.

2. Set up a NETGEAR account if you do not have one.

3. Tap the menu in the upper-left corner.

4. Tap REGISTER ANY NETGEAR DEVICE.

5. Enter the serial number located on the bottom of the switch, or use the

camera on your mobile device to scan the serial number bar code.

6. Tap GO.

The switch is registered and added to your account. You can now view the

switch in the NETGEAR Insight app.

Note: %HFDXVHWKLVLVDQXQPDQDJHGVZLWFK\RXFDQQRWFRQŴJXUHRUPDQDJHLW

in NETGEAR Insight.

Connect the switch

Sample connections

Router

Internet

PoE VoIP

phone

PoE+

security

camera

Smart

phone

/DSWRS

Wave 2

Wireless AP

GS308PP

ReadyNAS Internet

PoE+

Ethernet

1. Connect network devices to the ports on the switch.

2. Connect an RJ-45 port on the switch to a network.

Note: ,QDVPDOORIŴFHRUKRPHRIŴFHQHWZRUNFRQQHFWWKHVZLWFKWRWKH/$1

port of a router that, in turn, is connected to an Internet modem.

3. Power on the switch.

PoE considerations

The switch prioritizes the PoE+ power that it supplies in ascending port order

(from port 1 to port 8). If the aggregate power requirements of all attached power

devices (PD) exceed the power budget of the switch, the PD on the highest-

numbered port is disabled to make sure that the PDs that are connected to the

KLJKHUSULRULW\ORZHUQXPEHUHGSRUWVDUHVXSSRUWHGŴUVW

The following tables describe the power adapter models that are compatible with

the GS308PP switch and the PoE classes and switch allocations:

Note: The listed total power budget is the maximum power limit for the

switch. Many PDs require less than maximum power, so the aggregate power

requirements are lower than the maximum, allowing all eight PoE ports to be

active simultaneously.

Power adapters and total power budgets for the GS308PP:

Power adapter model Power adapter Total power budget

EPS90W 90W 83W

EPS130W 130W 123W

PoE classes and switch allocations:

Device

class

Standard Class

description

Minimum power

allocated to the

powered device

Range of power

delivered to the

powered device

0 PoE and PoE+ Default power

(full)

0.44W 0.44W–12.95W

are trademarks of NETGEAR, Inc. Any non-NETGEAR

trademarks are used for reference purposes only.

Device

class

Standard Class

description

Minimum power

allocated to the

powered device

Range of power

delivered to the

powered device

1 PoE and PoE+ Very low

power

4.0W 0.44W–3.84W

2 PoE and PoE+ /RZSRZHU 7.0W 3.84W–6.49W

3 PoE and PoE+ Mid power 15.4W 6.49W–12.95W

4 PoE+ only High power 30.0W 12.95W–25.5W

PoE troubleshooting

Here are some tips for correcting PoE problems that might occur:

• 0DNHVXUHWKDWWKH3R(0D[/('LVRII,IWKH3R(0D[/('LVVROLG\HOORZ

disconnect one or more PoE devices to prevent PoE oversubscription. Start by

disconnecting the device from the highest-numbered port.

• Make sure that the Ethernet cables are plugged in correctly. For each

powered device (PD) that is connected to the switch, the corresponding right

SRUW/('RQWKHVZLWFKOLJKWVVROLGJUHHQ,IWKHULJKWSRUW/('OLJKWVVROLG

yellow, a PoE fault occurred and PoE halted because of one of the conditions

that are listed in the following table.

PoE Fault Condition Possible Solution

A PoE-related short circuit occurred on the

port.

The problem is most likely with the attached

PD. Check the condition of the PD or restart the

PD by disconnecting and reconnecting the PD.

The PoE power demand of the PD exceeded

the maximum level that the switch permits,

which is 30.9W.

The PoE current on the port exceeded the

FODVVLŴFDWLRQOLPLWRIWKH3'

The PoE voltage of the port is outside the

range that the switch permits.

Restart the switch to see if the condition

resolves itself.

December 2019

Check the PoE status

Power LED Left Port LEDs Right PoE LEDs

On 1000 Mbps link PoE in use

Off 100 or 10 Mbps link PoE halted (see PoE

troubleshooting)

Activity (blinking) No PoE use (off)

No link (off)

The switch can supply up to 30W PoE+ (IEEE 802.3at) to each port, with a

maximum PoE power budget of total 83W with a 90W power adapter and total

123W with a 130W power adapter across all active PoE+ ports.

7KH3R(0D[/('LQGLFDWHVWKHVWDWXVRIWKH3R(EXGJHWRQWKHVZLWFK

Solid yellow/HVVWKDQ:RI3R(SRZHULVDYDLODEOHRQWKHVZLWFK

Blinking yellow7KH3R(0D[/('ZDVOLWVROLGLQWKHSUHYLRXVWZRPLQXWHV

6XIŴFLHQWPRUHWKDQ:RI3R(SRZHULVDYDLODEOHRQWKHVZLWFKWKH/('LVRII

Cables and speeds

The following table describes the network cables that you can use for the switch

connections and the speeds that thesse cables can support, up to 328 feet (100

meters).

Speed Cable Type

100 Mbps Category 5 (Cat 5) or higher

1 Gbps Category 5e (Cat 5e) or higher

Attach the switch to a wall

To attach the switch to a wall, you need the wall-mount screws that are supplied

with the switch.

To attach the switch to a wall:

1. /RFDWHWKHWZRPRXQWKROHVRQWKHERWWRPSDQHORIWKHVZLWFK

2. Mark and drill two mounting holes in the wall where you want to mount the

switch.

The two mounting holes must be at a precise distance of 4.27 in. (108.4 mm)

from each other.

3. Insert the supplied anchors into the wall and tighten the supplied screws with

a No. 2 Phillips screwdriver.

Note: /HDYHDERXWLQPPRIHDFKVFUHZSURWUXGLQJIURPWKHZDOOVR

that you can insert the screws into the holes on the bottom panel.

Change the switch’s PoE budget

You can move the slider on the back of the switch to increase or decrease the

PoE budget. You can increase the PoE budget if you buy a higher wattage power

supply. You also can move the slider to a PoE budget that is lower than the power

supply wattage. This reduces your switch’s power consumption. However, we

recommend using the slider setting that matches your power supply.

1. Power down the switch and disconnect the

power cord.

2. Move the slider to the setting that

corresponds to the wattage of the new power

adapter.

3. Connect the power cord and power on the

switch.

6SHFLĬFDWLRQV

6SHFLĬFDWLRQ Description

Network interfaces 8 Gigabit Ethernet RJ-45 ports that support 1G, 100 M, and 10 M

8 PoE/PoE+ ports

Power adapter input Power cord varies by region.

Power adapter output The switch supports two power adapters:

• 90W: 54V @ 1.66A

• 130W: 54V @ 2.4A

Max PoE budget The maximum budget for each power adapter is as follows:

• 90W: 83W PoE

• 130W: 123W PoE

Dimensions

(W x D x H)

9.3 x 4.0 x 1 in. (236 x 102 x 27 mm)

Weight 1.32 lb (0.6 kg)

Operating temperature 32–104°F (0–40°C)

Operating humidity 10%–90% relative humidity, noncondensing

Compliance FCC class A, CB, CE class A, VCCI class A, RCM class A, KC, BSMI,

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

Support

Thank you for purchasing this NETGEAR product. You can visit

https://www.netgear.com/support/ to register your product, get help, access the

latest downloads and user manuals, and join our community. We recommend that

\RXXVHRQO\RIŴFLDO1(7*($5VXSSRUWUHVRXUFHV

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en

français canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian

French at https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of

Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Do not use this device outdoors. The PoE source is intended for intra building

connection only.

Andere Handbücher für GS308PP

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR FSM726S Bedienungsanleitung

NETGEAR

NETGEAR GS724AT - ProSafe Gigabit Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR FS108 - ProSafe 10/100 Desktop Switch Bedienungsanleitung

NETGEAR

NETGEAR GS605 - Gigabit Desktop Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS108 Bedienungsanleitung

NETGEAR

NETGEAR FS116 Bedienungsanleitung

NETGEAR

NETGEAR GS316EP Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS110T Bedienungsanleitung

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Montage- und Bedienungsanleitung

NETGEAR

NETGEAR GC110P Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GSM7324 Bedienungsanleitung

NETGEAR

NETGEAR GSM712 Bedienungsanleitung

NETGEAR

NETGEAR JGS524F Bedienungsanleitung

NETGEAR

NETGEAR GS605v4 Bedienungsanleitung

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR GS728TPS Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR FS105 Bedienungsanleitung

NETGEAR

NETGEAR GS108X Bedienungsanleitung

NETGEAR

NETGEAR WFS709TP - ProSafe Smart Wireless Controller Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE Plus GS108Ev3 Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE S3300 Bedienungsanleitung

NETGEAR

NETGEAR Smart Switch GS752TXS Handbuch

NETGEAR

NETGEAR ProSafe GS108 Bedienungsanleitung

NETGEAR

NETGEAR GS110TP - ProSafe Gigabit Smart Switch Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch