NETGEAR GS408EPP Handbuch

350 East Plumeria Drive

San Jose, CA 95134

USA

December 2016

202-11694-02

ProSAFE Easy-Mount 8-Port Gigabit

Ethernet PoE+ Web Managed Switch

GS408EPP

Hardware Installation Guide

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

Support

Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help,

access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR

support resources.

Conformity

For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.

Compliance

For regulatory compliance information, visit http://www.netgear.com/about/regulatory.

See the regulatory compliance document before connecting the power supply.

Trademarks

used for reference purposes only.

Revision History

Publication Part Number Publish Date Comments

202-11694-02 December 2016 Updated table in Chapter 3, Step 1: Prepare the Site.

202-11694-01 October 2016 First publication

Contents | 3

Contents

Chapter 1 Introduction

Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Safety Instructions and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 2 Hardware Overview

Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Back Panel and Bottom Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Switch Hardware Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

RJ-45 Ports for 10/100/1000BASE-T Connectivity. . . . . . . . . . . . . . . . . . .11

Factory Defaults Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Chapter 3 Installation

Step 1: Prepare the Site. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Step 2: Protect Against Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . .13

Step 3: Unpack the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Step 4: Install the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Wall-Mount the Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Attach the Switch to a Pole or Table Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Install the Switch in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Step 5: Check the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Step 6: Apply AC Power and Check the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Chapter 4 PoE Applications

PoE Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Connect PoE Equipment for Surveillance and Security . . . . . . . . . . . . . . . . . . . .20

Connect PoE Equipment in a Business Environment . . . . . . . . . . . . . . . . . . . . . . .21

Chapter 5 Troubleshooting

Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Additional Troubleshooting Suggestions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

1. Introduction

The NETGEAR ProSAFE®8-Port Gigabit Ethernet Easy-Mount GS408EPP Web Managed

Switch is specifically designed to “put your ports where you want them” to power your IP security

cameras, WiFi access points, or VoIP phones with PoE+ (802.3at) up to 30W per port.

This switch provides eight Gigabit ports in a unique form factor that can be wall mounted, pole

mounted, under table, ceiling air-duct, desktop, or 1U rack mounted with two units per 1U slot

with one facing forward and one facing the rear (all connections are on the front of the switch).

This hardware installation guide complements the installation guide that came with your switch.

The Resource CD that came with your switch includes software and additional documentation

and support resources.

This chapter serves as an introduction to the switch and includes the following sections:

•Hardware Features

•Safety Instructions and Warnings

Note: For more information about the topics that are covered in this manual,

visit the support website at support.netgear.com.

Note: For technical specifications, see the data sheet at

netgear.com/business/products/switches/web-managed.

For switch documentation, see the resource CD in the product

package or visit downloadcenter.netgear.com.

Introduction

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

Hardware Features

The switch includes the following key hardware features:

•The switch provides eight (8) Gigabit Ethernet PoE+ (802.3at) RJ-45 ports.

•16 Gbps switching fabric (duplex mode, all ports line-rate).

•Industry-unique chassis for desktop operation, wall operation, rack-mounting in a wiring

closet or equipment room, or attachable almost anywhere using the Easy-Mount system.

•Full compatibility with IEEE standards:

-IEEE 802.3i (10BASE-T)

-IEEE 802.3u (100BASE-TX)

-IEEE 802.3ab (1000BASE-T)

-IEEE 802.3az (Energy Efficient Ethernet)

-IEEE 802.3x (Full-duplex flow control)

-IEEE 802.1af (PoE)

-IEEE 802.1at (PoE+)

•AutoSensing and autonegotiating capabilities for all ports.

•Auto Uplink technology supported on all ports.

•Automatic address learning function to build the packet-forwarding information table. The

table contains up to 8K Media Access Control (MAC) addresses.

•Store-and-forward transmission to remove bad packets from the network.

•Full-duplex IEEE 802.3x pause frame flow control.

•Active flow control to minimize packet loss and frame drops.

•Half-duplex backpressure control.

•Per-port status LEDs and system status LEDs.

•NETGEAR green power-saving features:

-Energy efficiency mode that fully conforms to the IEEE 802.3az standard

-Per-port automatic change to a lower power mode when the port link is down

•Support for Power over Ethernet (PoE+).

Introduction

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

Safety Instructions and Warnings

Use the following safety guidelines to ensure your own personal safety and to help protect

your system from potential damage.

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions:

•This product is designed for indoor use only in a temperature-controlled (0–50 C°) and

humidity-controlled (10–90 percent relative humidity) environment.

Any device that is located outdoors and connected to this product must be properly

grounded and surge protected.

To the extend permissible by applicable law, failure to follow these guidelines could result

in damage to your NETGEAR product, which might not be covered by NETGEAR’s

warranty.

•Observe and follow service markings:

-Do not service any product except as explained in your system documentation.

-Opening or removing covers that are marked with the triangular symbol with a

lightning bolt can expose you to electrical shock. We recommend that only a trained

technician services components inside these compartments.

•If any of the following conditions occur, unplug the product from the electrical outlet and

replace the part or contact your trained service provider:

-The power cable, extension cable, or plug is damaged.

-An object fell into the product.

-The product was exposed to water.

-The product was dropped or damaged.

-The product does not operate correctly when you follow the operating instructions.

•Keep your system away from radiators and heat sources. Also, do not block cooling

vents.

•Do not spill food or liquids on your system components, and never operate the product in

a wet environment. If the system gets wet, see the appropriate section in your

troubleshooting guide, or contact your trained service provider.

•Do not push any objects into the openings of your system. Doing so can cause fire or

electric shock by shorting out interior components.

•Use the product only with approved equipment.

•Allow the product to cool before removing covers or touching internal components.

•Operate the product only from the type of external power source indicated on the

electrical ratings label. If you are not sure of the type of power source required, consult

your service provider or local power company.

Introduction

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

•To avoid damaging your system, be sure that the voltage selection switch (if provided) on

the power supply is set to match the power at your location:

-115V, 60 Hz in most of North and South America and some Far Eastern countries

such as South Korea and Taiwan

-100V, 50 Hz in eastern Japan and 100V, 60 Hz in western Japan

-230V, 50 Hz in most of Europe, the Middle East, and the Far East

•Be sure that attached devices are electrically rated to operate with the power available in

your location.

•Use only approved power cables. If you were not provided with a power cable for your

system or for any AC-powered option intended for your system, purchase a power cable

approved for your country. The power cable must be rated for the product and for the

voltage and current marked on the product electrical ratings label. The voltage and

current rating of the cable must be greater than the ratings marked on the product.

•To help prevent electric shock, plug the system and peripheral power cables into properly

grounded electrical outlets.

•The peripheral power cables are equipped with three-prong plugs to help ensure proper

grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you

must use an extension cable, use a three-wire cable with properly grounded plugs.

•Observe extension cable and power strip ratings. Make sure that the total ampere rating

of all products plugged into the extension cable or power strip does not exceed 80

percent of the ampere ratings limit for the extension cable or power strip.

•To help protect your system from sudden, transient increases and decreases in electrical

power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

•Position system cables and power cables carefully. Route cables so that they cannot be

stepped on or tripped over. Be sure that nothing rests on any cables.

•Do not modify power cables or plugs. Consult a licensed electrician or your power

company for site modifications.

•Always follow your local and national wiring rules.

2. Hardware Overview

This chapter describes the switch hardware features.

The chapter includes the following sections:

•Hardware Description

•Switch Hardware Interfaces

Hardware Overview

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

Hardware Description

This section describes the switch hardware features.

Front Panel

The switch provides eight 10/100/1000BASE-T RJ-45 PoE ports. The following figure shows

the front panel.

Figure 1. Front panel

From left to right, the front panel provides the following components:

•Power and PoE LEDs (see LEDs on page 10)

•Recessed Factory Defaults button

•Eight independent 10/100/1000BASE-T RJ-45 PoE ports, each with a right LED that

indicates the PoE status and a left LED that functions as the combined speed and activity

LED (see LEDs on page 10)

•One AC power receptacle

Back Panel and Bottom Panel

The switch integrates a fixed, internal power supply unit (PSU).

The back panel does not contain any components other than two mounting holes that allow

you to mount the switch horizontally or vertically. The bottom panel also contains mounting

holes. For more information, see Step 4: Install the Switch on page 15.

The following figure illustrates the back panel with the mounting holes.

Figure 2. Back panel

Power and PoE LEDs

AC power receptacle

Factory Defaults button

10/100/1000BASE-T PoE+ ports

Hardware Overview

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

The following figure shows the bottom panel with the mounting holes.

Figure 3. Bottom panel

LEDs

The following table describes the LEDs on the front panel.

Table 1. LEDs

LED Designation

Power • Solid green. The power module is present, is supplying power to the switch,

and is functioning normally.

• Off. Power is not supplied to the switch.

10/100/1000BASE-T RJ-45

PoE ports

(two LEDs per port)

Left side speed and activity LED:

• Solid green. A valid 1 Gbps link is established on the port.

• Blinking green. The port is transmitting or receiving packets at 1 Gbps.

• Solid yellow. A valid 10 Mbps or 100 Mbps link is established on the port.

• Blinking yellow. The port is transmitting or receiving packets at 10 Mbps or

100 Mbps.

• Off. No link is established on the port.

Right side PoE status LED:

• Solid green. A PoE-powered device (PD) is connected and the port is

supplying power successfully.

• Solid yellow. Indicates one of the following failures, which prevents the port

from supplying power:

- A short circuit occurred on the PoE power circuit.

- The PoE power demand exceeds the available power.

- The PoE current exceeds the PD’s classification.

- An out-of-proper voltage band condition occurred.1

• Off. A PoE-powered device (PD) is not connected to the port.

1. The correct voltage band for EEE 802.1af (PoE) is 44–57 VDC. The correct voltage band for EEE 802.1at (PoE+) is 50–57 VDC.

PoE Max • Solid yellow. Less than 7W of PoE power is available.

• Blinking yellow. The PoE Max LED was active in the previous two minutes.

• Off. PoE ports are working normally.

PoE Fan • Yellow. Fan failure.

• Off. Fan is working normally.

Andere Handbücher für GS408EPP

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR ProSafe GS700TP Bedienungsanleitung

NETGEAR

NETGEAR GSM7248R - ProSafe Switch Betriebsanleitung

NETGEAR

NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable... Bedienungsanleitung

NETGEAR

NETGEAR FS116P - ProSafe 16 Port 10/100 Desktop... Bedienungsanleitung

NETGEAR

NETGEAR FS726TP - ProSafe Smart Switch Montageanleitung

NETGEAR

NETGEAR GS748T - ProSafe Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS700TP Bedienungsanleitung

NETGEAR

NETGEAR GS810EMX Bedienungsanleitung

NETGEAR

NETGEAR GS748TPS - ProSafe Switch - Stackable Bedienungsanleitung

NETGEAR

NETGEAR M4350 Series Handbuch

NETGEAR

NETGEAR GS348PP Bedienungsanleitung

NETGEAR

NETGEAR 7300 Series Bedienungsanleitung

NETGEAR

NETGEAR GSM4248PX Handbuch

NETGEAR

NETGEAR 7300 Series Bedienungsanleitung

NETGEAR

NETGEAR PROSAFE XS716E Bedienungsanleitung

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GSM7328 Bedienungsanleitung

NETGEAR

NETGEAR M4100 Series ProSAFE Handbuch

NETGEAR

NETGEAR FS116P - ProSafe 16 Port 10/100 Desktop... Bedienungsanleitung

NETGEAR

NETGEAR EN104 - Hub - EN Bedienungsanleitung

NETGEAR

NETGEAR GS305v3 Bedienungsanleitung

NETGEAR

NETGEAR M5300 Series Bedienungsanleitung

NETGEAR

NETGEAR FS2105 Bedienungsanleitung

NETGEAR

NETGEAR XS708T Handbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch