NETGEAR GS724Tv1 - ProSafe Gigabit Smart Switch Bedienungsanleitung

Start Here

Follow these instructions to set up your smart switch.

Prepare to Install Your Smart Switch

• Prepare a PC with an Ethernet adapter and a CD ROM drive.

• Before proceeding with the smart switch installation, familiarize yourself with

the contents of the Resource CD, especially the manuals.

First, Install the Smartwizard Discovery Utility on a PC

1. Power on your PC, let the operating system boot up completely, and log in as

needed.

2. Insert the Resource CD for the Smart Switch Series into your CD-ROM drive.

The CD main page shown below will load.

3. Click Install. Follow the links on the CD and the setup utility prompts to

complete the installation of the Smartwizard Discovery utility.

4. Click OK when done.

Next, Connect Your Smart Switch in the Correct Order

Note: These instructions assume you are using DHCP in your network. If you are

using static IP addressing in your network, configure the switch IP address before

connecting it to your network. In the absence of a DHCP server, the switch will

default to 192.168.0.239 for its IP address. To configure the switch before

connecting it to your network, set up the PC with an IP address in the 192.168.0.x

subnet, and connect the PC to the switch. Then, use the Smartwizard Discovery

utility as illustrated below to configure the switch.

1. Connect the smart switch to your network.

2. Power on the switch. The switch will get its TCP/IP configuration from the

DHCP server on your network.

3. Assure that the PC with the Smartwizard Discovery utility can assess the switch.

Now, Configure the Switch with the Smartwizard

Discovery Utility

1. Click the SmartDiscovery icon on your desktop or in Windows Start

menu Programs to view this screen.

2. Click Discover to find your switch in the network.

The Smartwizard Discovery utility finds the switch and displays its MAC

Address, IP Address, and model number. If you cannot configure your switch,

verify that the cable connections are secure, that the IP address configuration of

the PC is in the same subnet as the switch, and click the Discover button.

3. Click to select the line displaying the details of your switch. If there are multiple

smart switches in your network, be sure to select the one you want to configure.

6PDUW6ZLWFK6HULHV

,QVWDOODWLRQ*XLGH

6HUYHUV &RPSXWHUV 3ULQWHUV

6PDUW6ZLWFK

)676KRZQ

3&ZLWK6PDUWZL]DUG'LVFRYHU\8WLOLW\

6PDUW6ZLWFK

)676KRZQ

4. Click Web Access to view the switch log in screen.

5. Enter the default password of password in lower case letters and click Login.

The switch will display the switch settings main page. Configure the switch for

your network. Consult the manual on the CD or the online help in the switch for

assistance with configuration procedures.

After you log in to the switch, the main Web Access menu displays.

Use the configuration menu options to configure your switch.

Troubleshooting Tips

Here are some tips for correcting simple problems you may have.

Be sure to power on your PC and smart switch in the correct sequence.

Follow this sequence. Turn off the smart switch and computer. First, turn on the

smart switch and wait two minutes. Next turn on the computer.

Make sure the Ethernet cables are securely plugged in.

For each powered on computer connected to the smart switch with a securely

plugged in Ethernet cable, the corresponding smart switch LAN port status light

will be lit.

Make sure the network settings of the computer are correct.

In most cases, computers should be configured to obtain an IP address

automatically via DHCP.

If your network uses static IP addresses, be sure the switch and computer are

configured with valid IP addresses.

Check the smart switch status lights to verify correct operation.

If the Power light does not turn on or the port status lights do not light, verify

that the power cord is properly plugged in and then reset the smart switch

according to the instructions in the Hardware Manual on the CD.

Technical Support

Thank you for selecting NETGEAR products.

To register, go to: http://www.NETGEAR.com/register

Go to http://www.NETGEAR.com/support for support information.

NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or

other countries.

Other brand and product names are trademarks or registered trademarks of their

respective holders. Information is subject to change without notice.

February 2004

Andere Handbücher für GS724Tv1 - ProSafe Gigabit Smart Switch

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR M4100 Series ProSAFE Handbuch

NETGEAR

NETGEAR JGS524FNA Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE GS116Ev2 Bedienungsanleitung

NETGEAR

NETGEAR FSM726v1 - 10/100 Mbps Managed Switch Bedienungsanleitung

NETGEAR

NETGEAR GS208 Bedienungsanleitung

NETGEAR

NETGEAR GS750E Handbuch

NETGEAR

NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Bedienungsanleitung

NETGEAR

NETGEAR GS605av Bedienungsanleitung

NETGEAR

NETGEAR EN104 - Hub - EN Bedienungsanleitung

NETGEAR

NETGEAR GSM7312 - ProSafe Layer 3 Managed Gigabit... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GSM7228PS Bedienungsanleitung

NETGEAR

NETGEAR XS712Tv2 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FS728TPv2 Bedienungsanleitung

NETGEAR

NETGEAR GS110EMX Bedienungsanleitung

NETGEAR

NETGEAR GS748TPS - ProSafe Switch - Stackable Bedienungsanleitung

NETGEAR

NETGEAR GS308P Bedienungsanleitung

NETGEAR

NETGEAR 7300 Series Bedienungsanleitung

NETGEAR

NETGEAR GSM7352SNA - Prosafe 48 Port Gigabit L3 Managed Stackable... Bedienungsanleitung

NETGEAR

NETGEAR GSM7312 - ProSafe Layer 3 Managed Gigabit... Bedienungsanleitung

NETGEAR

NETGEAR GSM7224 - Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FS116 Bedienungsanleitung

NETGEAR

NETGEAR MS108UP Bedienungsanleitung

NETGEAR

NETGEAR FS116P - ProSafe 16 Port 10/100 Desktop... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FS752TP Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung