NETGEAR GS728TPv2 Handbuch

24-Port and 48-Port Gigabit

PoE+ Smart Managed Pro

Switches with 4 SFP Ports

Hardware Installation Guide

Models

GS728TPv2

GS728TPPv2

GS752TPv2

GS752TPP

January 2018

202-11826-01

350 E. Plumeria Drive

San Jose, CA 95134

USA

Support

Thank you for purchasing this NETGEAR product.You can visit www.netgear.com/support to register your

product, get help, access the latest downloads and user manuals, and join our community.We recommend that

you use only official NETGEAR support resources.

Conformity

For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.

Compliance

For regulatory compliance information, visit http://www.netgear.com/about/regulatory.

See the regulatory compliance document before connecting the power supply.

Trademarks

©NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc.Any non-NETGEAR

trademarks are used for reference purposes only.

24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports

Contents

Chapter 1 Introduction

Overview................................................................................................................5

Features.................................................................................................................5

Safety Instructions and Warnings..........................................................................7

Chapter 2 Hardware Overview

Hardware Description..........................................................................................10

Front Panel......................................................................................................10

LEDs...............................................................................................................12

Back Panel......................................................................................................13

Switch Hardware Interfaces.................................................................................13

RJ-45 Ports for 10/100/1000M BASE-T Ethernet Connectivity.......................13

SFP Ports for Fiber or Copper Connectivity....................................................14

Reset Button...................................................................................................14

Factory Defaults Button...................................................................................14

USB Port.........................................................................................................14

Chapter 3 Applications

PoE Overview......................................................................................................16

Gigabit Aggregation Switching With PoE.............................................................17

Connect PoE Equipment in a Business Environment..........................................18

Connect PoE Equipment for Surveillance and Security.......................................19

Chapter 4 Installation

Step 1: Prepare the Site.......................................................................................21

Step 2: Protect Against Electrostatic Discharge...................................................21

Step 3: Unpack the Switch...................................................................................22

Step 4: Install the Switch......................................................................................23

Mount the Switch in a Rack.............................................................................23

Install the Switch on a Flat Surface.................................................................24

Optional Step 5: Install SFP Transceiver Modules...............................................24

Step 6: Connect Devices to the Switch................................................................25

Step 7: Check the Installation..............................................................................25

Step 8: Apply Power and Check the LEDs...........................................................25

Step 9: Manage the Switch..................................................................................26

Chapter 5Troubleshooting

Troubleshooting Chart..........................................................................................28

PoE Troubleshooting Suggestions.......................................................................29

Additional Troubleshooting Suggestions..............................................................29

Introduction

This hardware installation guide is for the following NETGEAR Smart Managed Pro Switches:

•24-Port Gigabit PoE+ Smart Managed Pro Switch with 4 SFP Ports, Model GS728TPv2

•24-Port Gigabit PoE+ Smart Managed Pro Switch with 4 SFP Ports, Model GS728TPPv2

•48-Port Gigabit PoE+ Smart Managed Pro Switch with 4 SFP Ports, Model GS752TPv2

•48-Port Gigabit PoE+ Smart Managed Pro Switch with 4 SFP Ports, Model GS752TPP

The switch provides twenty-four or forty-eight Gigabit RJ-45 copper PoE+ ports with four dedicated SFP ports.

Power over Ethernet plus (PoE+) lets you provide power to PoE-capable devices such as WiFi access points,

VoIP phones, and IP security cameras so that you do not need to use power supplies for those devices.The

maximum PoE+ (IEEE 802.3at) power that the switch can provide across all active PoE+ ports depends on the

model: 190W for model GS728TPv2, 380W for models GS728TPPv2 and GS752TPv2, and 760W for model

GS752TPP.

This hardware installation guide complements the installation guide that came with your switch.The resource

CD that came with your switch includes software and additional documentation and support resources.

This chapter serves as an introduction to the switch and includes the following sections:

•Overview

•Features

•Safety Instructions and Warnings

For more information about the topics that are covered in this manual, visit the support website

at support.netgear.com.

Note

For technical specifications, see the data sheet at

netgear.com/business/products/switches/managed. For switch documentation, see the

resource CD in the product package or visit downloadcenter.netgear.com.

Note

Overview

The switch provides twenty-four or forty-eight 10/100/1000BASE-T RJ-45 copper ports that support nonstop

10/100/1000MLayer2 and Layer3 networks.All RJ-45ports support PoE+.Four additionalports can accept

small form-factor pluggable (SFP) gigabit interface converters (GBICs) for 1G fiber or copper connectivity.

For information about application samples, see Applications on page 15.Note

The switch provides administrative management options that let you configure, monitor, and control the

network. Using the local browser–based management interface, you can configure the switch and the

network, including theports,the managementVLAN,VLANs fortrafficcontrol, link aggregationforincreased

bandwidth, Quality of Service (QoS) for prioritizing traffic, and network security.

Initial discovery of the switch on the network requires the Smart Control Center program, which runs on a

Windows-based computer and is included on the resource CD.If you do not use aWindows-based computer,

get the IP address of the switch from the DHCP server in the network or use an IP scanner utility.

After discovery, you can configure the switch using the local browser interface for advanced setup and

configuration of features, or the Smart Control Center program for very basic setup. For more information,

see the user manual, which you can download from downloadcenter.netgear.com.

You can install the switch freestanding or rack mounted in a wiring closet or equipment room.The switch

is IEEE compliant and offers low latency. All ports can automatically negotiate to the highest speed, which

makes the switch very suitable for a mixed environment with Fast Ethernet and Gigabit Ethernet.

Use Category 5e (Cat 5e) or higher-rated Ethernet cables terminated with RJ-45 connectors to make Gigabit

connections.

Features

The switch supports the following key hardware features:

•24 or 48 PoE+ Gigabit Ethernet ports.

•4 dedicated SFP ports for 1000BASE-SX, 1000BASE-LX, and 1000BASE-T connectivity.

•PoE+ support:

-24 or 48 PoE+ (802.3at) ports

-Total PoE+ power budget of 190W (model GS728TPv2), 380W (models GS728TPPv2 and

GS752TPv2), or 760W (model GS752TPP)

•MAC table size of 16K.

•Variable speed fan that can lower the noise level during low temperatures.

•Acoustic noise (measured at 25°C) is equal to or less than 31 dBA (model GS728TPv2), 35 dBA (model

GS728TPPv2), 38 dBA (model GS752TPv2), or 43 dBA (model GS752TPP).

•56 Gbps (models GS728TPv2 and GS728TPPv2) or 104 Gbps (models GS752TPv2 and GS752TPP)

full-duplex, nonblocking switch fabric.

Introduction

24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports

•Includes 19-inch rack-mount kit for rack installation.

•Full compatibility with IEEE standards:

-IEEE 802.3 Ethernet

-IEEE 802.3i 10BASE-T

-IEEE 802.3u 100BASE-T

-IEEE 802.3ab 1000BASE-T

-IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX

-IEEE 802.1Q VLAN tagging

-IEEE 802.3x Full-duplex flow control

-IEEE 802.3ad Link aggregation (LAG with LACP)

-IEEE 802.1ab LLDP

-IEEE 802.1p Class of Service (QoS)

-IEEE 802.1D Spanning Tree Protocol (STP)

-IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)

-IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

-IEEE 802.1x RADIUS network access control

-IEEE 802.3az Energy Efficient Ethernet (EEE)

-IEEE 802.3af Power over Ethernet (PoE)

-IEEE 802.3at Power over Ethernet plus (PoE+)

•AutoSensing and autonegotiating capabilities for all ports.

•Auto Uplink™technology is supported on all ports.

•Automatic address learning function to build the packet-forwarding information table.The table contains

up to 16K Media Access Control (MAC) addresses.

•Store-and-forward transmission to remove bad packets from the network.

•Active flow control to minimize packet loss and frame drops.

•Half-duplex backpressure control.

•Per-port status LEDs and system status LEDs.

•NETGEAR green power-saving features:

-Energy efficiency mode that fully conforms to the IEEE802.3az standard

-Per-port automatic change to a lower power mode when the port link is down

Introduction

24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports

Safety Instructions andWarnings

Use the following safety guidelines to ensure your own personal safety and to help protect your system from

potential damage.

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following

precautions:

•This product is designed for indoor use only in a temperature-controlled (0–50°C) and humidity-controlled

(90 percent maximum relative humidity, noncondensing) environment.

Any device that is located outdoors and connected to this product must be properly grounded and surge

protected.

To the extent permissible by applicable law, failure to follow these guidelines can result in damage to

your NETGEAR product, which might not be covered by NETGEAR’s warranty.

•Observe and follow service markings:

-Do not service any product except as explained in your system documentation.

-Opening or removing covers that are marked with the triangular symbol with a lightning bolt can

expose you to electrical shock.We recommend that only a trained technician services components

inside these compartments.

•This device uses double-pole/neutral fusing.Servicing this device can present a risk of electrical shock.

Disconnect power before servicing the device.

•If any of the following conditions occur, unplug the product from the electrical outlet and replace the part

or contact your trained service provider:

-The power cable, extension cable, or plug is damaged.

-An object fell into the product.

-The product was exposed to water.

-The product was dropped or damaged.

-The product does not operate correctly when you follow the operating instructions.

•Keep your system away from radiators and heat sources. Also, do not block cooling vents.

•Do not spill food or liquids on your system components, and never operate the product in a wet

environment.If the system gets wet, see the appropriate section in your troubleshooting guide, or contact

your trained service provider.

•Do not push any objects into the openings of your system.Doing so can cause fire or electric shock by

shorting out interior components.

•Use the product only with approved equipment.

•Allow the product to cool before removing covers or touching internal components.

•Operate the product only from the type of external power source indicated on the electrical ratings label.

If you are not sure of the type of power source required, consult your service provider or local power

company.

Introduction

24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports

•To avoid damaging your system, be sure that the voltage selection switch (if provided) on the power

supply is set to match the power at your location:

-115V, 60 Hz in most of North and South America and some Far Eastern countries such as South

Korea and Taiwan

-100V, 50 Hz in eastern Japan and 100V, 60 Hz in western Japan

-230V, 50 Hz in most of Europe, the Middle East, and the Far East

•Be sure that attached devices are electrically rated to operate with the power available in your location.

•Use only approved power cables. If you were not provided with a power cable for your system or for

any AC-powered option intended for your system, purchase a power cable approved for your country.

The power cable must be rated for the product and for the voltage and current marked on the product

electrical ratings label.The voltage and current rating of the cable must be greater than the ratings

marked on the product.

•To help prevent electric shock, plug the system and peripheral power cables into properly grounded

electrical outlets.

•The peripheral power cables are equipped with three-prong plugs to help ensure proper grounding. Do

not use adapter plugs or remove the grounding prong from a cable.If you must use an extension cable,

use a three-wire cable with properly grounded plugs.

•Observe extension cable and power strip ratings.Make sure that the total ampere rating of all products

plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit

for the extension cable or power strip.

•To help protect your system from sudden, transient increases and decreases in electrical power, use a

surge suppressor, line conditioner, or uninterruptible power supply (UPS).

•Position system cables and power cables carefully. Route cables so that they cannot be stepped on or

tripped over. Be sure that nothing rests on any cables.

•Do not modify power cables or plugs. Consult a licensed electrician or your power company for site

modifications.

•Always follow your local and national wiring rules.

Introduction

24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports

Hardware Overview

This chapter describes the switch hardware features.

The chapter includes the following sections:

•Hardware Description

•Switch Hardware Interfaces

Hardware Description

The following sections describe the switch hardware features.

Front Panel

The switch provides twenty-four or forty-eight 10/100/1000BASE-T RJ-45 PoE+ ports and four SFP ports.

The following figures show the front panels.(The front panels do not state the v2 model designation.)

Figure 1. Front panel model GS728TPv2 (also applies to model GS728TPPv2)

Models GS728TPv2 and GS728TPPv2 provide twenty-four 10/100/1000BASE-T RJ-45 PoE+ ports and

four SFP ports.

Figure 2. Front panel model GS752TPv2 (also applies to model GS752TPP)

Models GS752TPv2 and GS752TPP provide forty-eight 10/100/1000BASE-T RJ-45 PoE+ ports and four

SFP ports.

Hardware Overview

24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports

Andere Handbücher für GS728TPv2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR GSM7224 - Switch Bedienungsanleitung

NETGEAR

NETGEAR S350 Series Bedienungsanleitung

NETGEAR

NETGEAR FS108P - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR MBR1210-1BMCNS - This Product is a Special... Kurzanleitung

NETGEAR

NETGEAR FS108P - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk SX10 Pro Gaming Bedienungsanleitung

NETGEAR

NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart... Bedienungsanleitung

NETGEAR

NETGEAR GS605AV Bedienungsanleitung

NETGEAR

NETGEAR GS108Tv2 - ProSafe Gigabit Smart Switch Coming... Bedienungsanleitung

NETGEAR

NETGEAR M4250 Series Bedienungsanleitung

NETGEAR

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable... Bedienungsanleitung

NETGEAR

NETGEAR GS728TPS Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR GS605av Bedienungsanleitung

NETGEAR

NETGEAR Network Adapter 202-10248-01 Handbuch

NETGEAR

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart... Bedienungsanleitung

NETGEAR

NETGEAR M5300 Series Bedienungsanleitung

NETGEAR

NETGEAR GSM7352SNA - Prosafe 48 Port Gigabit L3 Managed Stackable... Bedienungsanleitung

NETGEAR

NETGEAR GS316P Bedienungsanleitung

NETGEAR

NETGEAR ProSafe XS712T Handbuch

NETGEAR

NETGEAR 10/100/1000 Bedienungsanleitung

NETGEAR

NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Bedienungsanleitung

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR GS724TPv2 Bedienungsanleitung

NETGEAR

NETGEAR GS716T - ProSafe Switch Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung