NETGEAR GS728TXS Handbuch

350 East Plumeria Drive

San Jose, CA 95134

USA

March 2013

202-11201-01

v1.1

GS728TXS/GS752TXS

Smart Switch

Hardware Installation Guide

GS728TXS/GS752TXS Smart Switch

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and use it to register your product

at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website. For product updates and web

support, visit http://support.netgear.com

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at

http://support.netgear.com/general/contact/default.aspx

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change

Revision History

Publication Part Number Version Publish Date Comments

202-11201-01 v1.1 March 2013 First publication

Contents | 3

Contents

Chapter 1 Introduction

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Stacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 2 Physical Description

GS728TXS Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

GS728TXS Front Panel and Back Panel Configuration . . . . . . . . . . . . 11

LED Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Device Hardware Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

GS752TXS Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

GS752TXS Front Panel and Back Panel Configuration . . . . . . . . . . . . 14

LED Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Device Hardware Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chapter 3 Applications

Desktop Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Backbone Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 4 Installation

Step 1: Prepare the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Step 2: Install the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Install the Switch on a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Install the Switch in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Step 3: Check the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Step 4: Connect Devices to the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Step 5: Install an SFP Transceiver Module . . . . . . . . . . . . . . . . . . . . . . . . 24

Step 6: Install Device as Standalone or Stack Master. . . . . . . . . . . . . . . . 25

Step 7: Apply AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Step 8: Manage the Switch Using a Web Browser or the Smart Control Center Utility

Appendix A Troubleshooting

Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Additional Troubleshooting Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Network Adapter Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

GS728TXS/GS752TXS Smart Switch

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Switch Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Autonegotiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Appendix B Technical Specifications

Network Protocol and Standards Compatibility . . . . . . . . . . . . . . . . . . . . . 32

Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

GS728TXS Smart Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

GS752TXS Smart Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Physical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Electromagnetic Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Appendix C Notification of Compliance

1. Introduction

Congratulations on the purchase of your NETGEAR®ProSafeTM GS728TXS/GS752TXS Smart

Switch! Your GS728TX/GS752TXS Smart Switch is a state-of-the-art, high-performance,

IEEE-compliant network solution designed for users who require many ports and want the power

of Gigabit connectivity to eliminate bottlenecks, boost performance, and increase productivity.

There are either 24 (GS728TXS) or 48 (GS752TXS) twisted-pair ports on the front panel of the

switch that support nonstop 10/100/1000 networks. The front panel also has 4 SFP+ ports that

support 1000M and 10G optical modules or up to two stacking modules. To simplify installation,

the switch is shipped ready for use out of the box.

This installation guide describes how to install and power on the smart switch. The information in

this manual is intended for readers with intermediate computer and Internet skills.

This chapter serves as an introduction to the smart switch and includes the following sections:

•Overview

•Features

•Package Contents

GS728TXS/GS752TXS Smart Switch

Overview

The NETGEAR GS728TXS/GS752TXS Smart Switch provides either 24 (GS728TXS) or 48

(GS752TXS) twisted-pair ports that support nonstop 10/100/1000M networks. The switch

also has four built-in enhanced small form factor pluggable (SFP+) GBIC slots that support

1000M and 10G optical modules or up to two stacking modules.

Using these Gigabit slots, you can create high-speed connections to a server or network

backbone. For example, you can:

•Connect switches to each other with high-speed links

•Link to high-speed servers

•Provide 10/100/1000M copper and 1000M/10G fiber connectivity

•Connect up to six switches in a stack to create a high-port-capacity solution with a single

point of administration

The smart switch also provides the benefit of administrative management with a complete

package of features for the observation, configuration, and control of the network. You can

use the simple and intuitive web-based graphical user interface (GUI) to view and use the

switch’s many capabilities. The switch’s management features include configuration for port

and switch information, VLAN for traffic control, port trunking for increased bandwidth, and

Class of Service (CoS) for prioritizing traffic. These features provide better understanding and

control of the network. Initial discovery of the switch on the network requires the Smart

Control Center program, a utility that runs on a Windows computer.

The smart switch can be freestanding, stacked with other switches, or rack-mounted in a

wiring closet or equipment room. It is IEEE-compliant and offers low latency for high-speed

networking. All ports can automatically negotiate to the highest speed which makes the

switch ideal for environments that have a mix of Ethernet, Fast Ethernet, Gigabit Ethernet, or

10-Gigabit Ethernet devices. All RJ-45 ports operate in half-duplex or full-duplex mode. The

maximum segment length is 328 feet (100 meters) over Category 5 unshielded twisted-pair

(UTP) cable.

Features

The following lists the key features of the smart switch:

•24 (GS728TXS) or 48 (GS752TXS) 10/100/1000-Mbps autosensing Gigabit Ethernet

switching ports.

•4 dedicated 1000M/10G SFP+ fiber ports.

•Full NETGEAR Smart Switch functionality.

•Full compatibility with IEEE standards:

-IEEE 802.3i (10BASE-T)

-IEEE 802.3u (100BASE-TX)

-IEEE 802.3ab (1000BASE-T)

GS728TXS/GS752TXS Smart Switch

-IEEE 802.3z (1000BASE-x)

-IEEE 802.3 Clause 49 (10GBASE-LR and 10GBASE-SR)

-IEEE802.aq (10GBASE-LRM)

-IEEE802.3ae (10GBASE Ethernet)

-IEEE802.3az (Energy Efficient Ethernet)

-IEEE 802.3x (Full-duplex flow control)

•AutoSensing and autonegotiating capabilities for all ports.

•Auto Uplink™ on all ports to make the right connection.

•Automatic address learning function to build the packet-forwarding information table. The

table contains up to 16K Media Access Control (MAC) addresses.

•Store-and-forward transmission to remove bad packets from the network.

•Full-duplex IEEE 802.3x pause frame flow control.

•Active flow control to minimize packet loss and frame drops.

•Half-duplex backpressure control.

•Per port LEDs and power LED.

•Internal open frame power supply.

•Standard NETGEAR 7xx series chassis (1U high).

•NETGEAR Green product series power-saving features:

-Automatic power consumption adjustment based on the RJ-45 cable length

(GS752TXS only)

-Per port automatic power down when the port link is down.

Stacking

A stack can be controlled and managed from a single unit called the master unit. Any other

unit member of the stack is called a stack slave member.

In particular, firmware can be downloaded from the stack master to the other units in the

stack.

A unit serving as stack master runs the fully operational software of a switch. In addition, it

runs the master part of the distributed switching application that configures and manages all

other units in the stack. Generally, the master operates the remote slave’s low-level drivers,

through the distributed switching application part that is running in the context of the slave.

During stacking setup, the switches autoselect one device as the stacking master. All other

devices are named as slave stack members and assigned unique unit IDs. One of the slave

units is designated as the backup master. The backup master acts as a slave stack master,

but can become a stack master if the stack master fails. In the default configuration, the

master and backup master are assigned unit IDs of 1 and 2, respectively. The administrator

can use the web interface to configure different ID assignments. The stack master provides a

single point of control and management as well as a single interface in which to control and

manage the stack.

GS728TXS/GS752TXS Smart Switch

Switch software is downloaded separately for each stack member. However, all units in the

stack must be running the same software version.

A stack unit can operate in one of the following modes:

•A standalone unit runs as a general switch. The standalone unit does not run the stacking

application until it is connected to a stack.

•The master unit manages the entire stack, and is responsible for the entire stack

configuration. All protocols run in the context of the master unit. It updates and

synchronizes the backup master.

•A master-backup unit runs as a slave unit as described earlier, and in addition, it

continuously monitors the existence and operation of the stack master. If the master unit

fails, the master-backup unit assumes the stack-master role (switchover).

•A slave unit runs only a slave version of the distributed switching algorithm, which allows

the applications running on the master unit’s CPU to control and manage the resources of

the slave unit.

A stack can contain a mix of up to six GS728TXS and GS752TXS switches.

Package Contents

The following figure shows the package contents of the smart switch. (The figure shows the

GS752TXS Smart Switch; however, the GS728TXS Smart Switch has the same package

contents.)

Green=Link at 1G

Yellow=Link at 10/

100M

Power

Reset

Fan

Stack

Master

Facto ry

Defaults

12345678910 11 13 15 17 19 21

12 2214 16 18 20 23 25 27 29 31 33

24 3426 28 30 32 35 37 39 41 43 45 47

36 38 40 42 44 46 48

GS752TXS

50F

49F

Green=10G Link Yellow=1G

Blink=ACT

SFP

52F

51F

Link/Act Mode —

Figure 1. Package contents

GS728TXS/GS752TXS Smart Switch

Verify that the package contains the following:

•GS728TXS/GS752TXS Smart Switch

•Rubber footpads for tabletop installation

•Rack-mounting kits

•Power cord

•Installation guide

•Smart switch resource CD with NETGEAR Smart Control Center and user’s manual

If any item is missing or damaged, contact the place of purchase immediately.

2. Physical Description

This chapter describes the GS728TXS/GS752TXS Smart Switch hardware features. Topics

include:

•GS728TXS Description

•GS752TXS Description

Andere Handbücher für GS728TXS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR FS726TP - ProSafe Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR XS728T ProSAFE Bedienungsanleitung

NETGEAR

NETGEAR GS724T - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR FS605 v3 Bedienungsanleitung

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Montage- und Bedienungsanleitung

NETGEAR

NETGEAR GS716T - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR GS724Tv1 - ProSafe Gigabit Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE M4300 series Bedienungsanleitung

NETGEAR

NETGEAR GC108P Handbuch

NETGEAR

NETGEAR ProSafe GS108 Bedienungsanleitung

NETGEAR

NETGEAR GS724AT - ProSafe Gigabit Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR Smart Switch GS752TXS Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS108 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS105v4 Bedienungsanleitung

NETGEAR

NETGEAR FS108P - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE M6100 XCM8944 Bedienungsanleitung

NETGEAR

NETGEAR GS524T - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR GS308 Bedienungsanleitung

NETGEAR

NETGEAR FS116P - ProSafe 16 Port 10/100 Desktop... Bedienungsanleitung

NETGEAR

NETGEAR M4100 Series ProSAFE Bedienungsanleitung

NETGEAR

NETGEAR XS728T ProSAFE Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE GS105v5 Bedienungsanleitung

NETGEAR

NETGEAR GS728TPv2 Handbuch

NETGEAR

NETGEAR GS110EMX Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung