NETGEAR ProSAFE GS724Tv4 Bedienungsanleitung

Installation Guide

NETGEAR ProSAFE Smart Switch™ GS716Tv3

NETGEAR ProSAFE Smart Switch™ GS724Tv4

NETGEAR ProSAFE Smart Switch™ GS748Tv5

Package Contents

•NETGEAR ProSAFE Smart Switch

•Rubber footpads for tabletop installation

•AC power cord

•Rack-mount kit for rack installation

•Installation guide

•Smart Switch resource CD that includes the Smart Control Center Utility

and hardware installation guide. (A link to the online software administration

manual is on the resource CD.)

Configure the Switch

Install the Smart Control Center Utility and use it to configure the switch.

Install the Smart Control Center Utility on a Computer

1. Insert the resource CD into your CD drive.

2. Run the Setup program to install the Smart Control Center Utility.

The Installation Wizard guides you through the installation.

Connect Your Smart Switch

If you have a DHCP server in you network, see Connect the Switch to Your

Network.

If you are using static IP addresses in you network, first see Configure the

Switch with a Static IP Address, and then see Connect the Switch to Your

Network.

Configure the Switch with a Static IP Address

If you are using a static IP address in you network, configure the switch IP

address before connecting the switch to your network. The default IP address of

the switch is 192.168.0.239.

Note: If you are using a DHCP server in your network, this procedure does not

apply to you; instead, go directly to Connect the Switch to Your Network.

1. Set up the computer with a static IP address in the 192.168.0.x subnet.

2. Connect the computer to the switch.

3. Configure the IP address of the switch to match your network

configuration.

Connect the Switch to Your Network

1. Connect each computer to an RJ-45 network port on the switch front

panel.

Use Category 5 (Cat 5) or better Ethernet cable terminated with an RJ-45

connector to make these connections.

2. Connect the switch to your network.

3. Power on the switch.

4. Verify that the computer with the Smart Control Center Utility is on the same

subnet as the switch.

Configure the Switch with the Smart Control Center

Utility

1. Double-click the Smart Control Center Utility icon on your desktop or

click the icon in the Windows Start menu to run the utility and view this

screen.

2. Click the Discover button.

August 2013

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks

of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

The Smart Control Center Utility finds the switch and displays its MAC

address, IP address, and model number.

If the utility does not discover your switch, verify that the cable connections

are secure and that the IP address configuration of the computer is in the

same subnet as the switch, and click the Discover button.

3. Click the row for the switch that you want to configure.

4. Click the Web Browser Access button to view the switch Login screen.

5. Enter the default password of password in lower-case letters and click the

The System Information screen displays

6. Configure the switch for your network.

For more information, see the software administration manual.

Troubleshooting Tips

Here are some tips for correcting simple problems you might have.

•Be sure to power on your computer and switch in the following sequence:

1. Turn on the switch and wait about two minutes.

2. Turn on the computer and connect to the switch.

•Make sure the Ethernet cables are plugged in.

For each powered-on computer connected to the switch, the corresponding

switch LAN port status LED is lit.

•Make sure the network settings of the computer are correct.

In most cases, computers should be configured to obtain an IP address

through DHCP. If your network uses static IP addresses, be sure that the

switch and computer are configured with valid IP addresses. For more

information, see the software administration manual.

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product

and use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support

resources.

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

Andere Handbücher für ProSAFE GS724Tv4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR GS308 Bedienungsanleitung

NETGEAR

NETGEAR GSM7248R - ProSafe Switch Handbuch

NETGEAR

NETGEAR PROSAFE XS716E Bedienungsanleitung

NETGEAR

NETGEAR FS726T - ProSafe Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR GS418TPP Bedienungsanleitung

NETGEAR

NETGEAR M4250 Series Bedienungsanleitung

NETGEAR

NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable... Handbuch

NETGEAR

NETGEAR S3600 Series Bedienungsanleitung

NETGEAR

NETGEAR MVBR1210C Bedienungsanleitung

NETGEAR

NETGEAR GS516T - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR GSM7248R - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR XS728T ProSAFE Bedienungsanleitung

NETGEAR

NETGEAR ProSafe XS712T Bedienungsanleitung

NETGEAR

NETGEAR FS726TP - ProSafe Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR FS516 - Switch Bedienungsanleitung

NETGEAR

NETGEAR FSM726 - ProSafe Managed Switch Bedienungsanleitung

NETGEAR

NETGEAR GS748Tv4 Bedienungsanleitung

NETGEAR

NETGEAR GS748AT - ProSafe Gigabit Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR M4200 Series Bedienungsanleitung

NETGEAR

NETGEAR GS105v5 Bedienungsanleitung

NETGEAR

NETGEAR AG711F Bedienungsanleitung

NETGEAR

NETGEAR FS205v2 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS108 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS700TP Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung