NETGEAR ProSafe GS728TP Handbuch
350 East Plumeria Drive
San Jose, CA 95134
USA
December 2012
202-11136-01
v1.0
ProSafe® GS752TP,
GS728TP, and GS728TPP
Gigabit Smart Switches
Hardware Installation Guide
2
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change
without notice. Other brand and product names are registered trademarks or trademarks of their respective
holders. © NETGEAR, Inc. All rights reserved.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or
for more information about the topics covered in this manual, visit the support website at
http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/app/answers/detail/a_id/984.
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.
Revision History
Publication Part Number Version Publish Date Comments
202-11136-01 v1.0 December 2012 First publication
Contents | 3
Contents
Chapter 1 Introduction
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 2 Physical Description
GS752TP Front Panel and Back Panel Configuration. . . . . . . . . . . . . . . . 10
GS728TP Front Panel and Back Panel Configuration. . . . . . . . . . . . . . . . 11
GS728TPP Front Panel and Back Panel Configuration . . . . . . . . . . . . . . 12
LED Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
System LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Device Hardware Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
RJ-45 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SFP Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Factory Defaults Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Chapter 3 Applications
Desktop Switching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Backbone Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Chapter 4 Installation
Step 1: Prepare the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Step 2: Install the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Install the Switch on a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Install the Switch in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Step 3: Check the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Step 4: Connect Devices to the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Step 5: Install an SFP Transceiver Module . . . . . . . . . . . . . . . . . . . . . . . . 24
Step 6: Apply AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Step 7: Apply RPS DC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Step 8: Manage the Switch Using a Web Browser or the Computer Utility 26
4
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
Appendix A Troubleshooting
Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Additional Troubleshooting Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . .28
Network Adapter Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Switch Integrity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Autonegotiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Appendix B Technical Specifications
Network Protocol and Standards Compatibility . . . . . . . . . . . . . . . . . . . . .31
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Physical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Environmental Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Electromagnetic Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Appendix C Notification of Compliance
Index
5
1
1. Introduction
Congratulations on the purchase of your NETGEAR®ProSafeTM GS752TP, GS728TP, and
GS728TPP Gigabit Smart Switch. Your GS752TP, GS728TP, and GS728TPP Gigabit Smart
Switch is a state-of-the-art, high-performance, IEEE-compliant network solution designed for
users who require many ports and want the power of gigabit connectivity to eliminate
bottlenecks, boost performance, and increase productivity. The front panel of the switch has 24
or 48 twisted-paired ports that support nonstop 10/100/1000 networks. The front panel also has
4 SFP ports that support 1000M optical modules. To simplify installation, the switch is shipped
ready for use out of the box.
The GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches Hardware Installation Guide
describes how to install and power on the GS752TP, GS728TP, and GS728TPP Gigabit Smart
Switch. The information in this manual is intended for readers with intermediate computer and
Internet skills.
This chapter serves as an introduction to the GS752TP, GS728TP, and GS728TPP Gigabit
Smart Switch and provides the following information:
•Overview
•Features
•Package Contents
6
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
Overview
The NETGEAR GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch provides 48 or
24 twisted-pair ports that support nonstop 10/100/1000M networks. The switch also has four
built-in enhanced small form factor pluggable (SFP) GBIC slots that support 100M/1000M
modules.
Using these gigabit slots, you can create high-speed connections to a server or network
backbone. For example, you can:
•Connect switches to each other with high-speed links
•Link to high-speed servers
•Provide 10/100/1000M copper and 100M/1000M fiber connectivity
These switches also provide the benefit of administrative management with a complete
package of features for the observation, configuration, and control of the network. With a
web-based graphical user interface (GUI), the switch’s many capabilities can be viewed and
used in a simple and intuitive manner. The switch’s management features include
configuration for port and switch information, VLAN for traffic control, port trunking for
increased bandwidth, and Class of Service (CoS) for traffic prioritization. These features
provide better understanding and control of the network. Initial discovery of the switch on the
network requires the Smart Control Center program, a utility that runs on a computer.
These switches can be freestanding, or rack mounted in a wiring closet or equipment room. It
is IEEE compliant and offers low latency for high-speed networking.All ports can
automatically negotiate to the highest speed. This capability makes the switch ideal for
environments that have a mix of Ethernet, Fast Ethernet, or Gigabit Ethernet devices. In
addition, all RJ-45 ports operate in half-duplex or full-duplex mode. The maximum segment
length is 328 feet (100 meters) over Category 5 unshielded twisted-pair (UTP) cable.
Features
The following list identifies the key features of these switches:
•48 or 24 10/100/1000 Mbps AutoSensing Gigabit Ethernet switching ports.
•GS752TP and GS728TP. The first 8 ports are PoE+ providing 30 W of DC power, and the
remaining copper ports are PoE (Power over Environment) providing 15.4W of DC power.
•GS728TPP. All 24 copper ports are PoE+ providing 30 W of DC power. This model
includes an external power supply to support the increased power requirements.
•Four dedicated 100M/1000M SFP fiber ports.
•Full NETGEAR Smart Switch functionality.
•Full compatibility with IEEE standards:
•IEEE 802.3i (10BASE-T)
•IEEE 802.3u (100BASE-TX)
•IEEE 802.3ab (1000BASE-T)
7
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
•IEEE 802.3z (1000BASE-x)
•IEEE802.3af (DTE Power via MDI)
•IEEE802.3at (DTE Power via MDI Enhancements)
•IEEE802.3az (Energy Efficient Ethernet)
•IEEE 802.3x (Full-duplex flow control)
•AutoSensing and auto-negotiating capabilities for all ports.
•Auto Uplink™ on all ports to make the right connection.
•Automatic address learning function to build the packet-forwarding information table. The
table contains up to 8K Media Access Control (MAC) addresses.
•Store-and-forward transmission to remove bad packets from the network.
•Full-duplex IEEE 802.3x pause frame flow control.
•Active flow control to minimize packet loss and frame drops.
•Half-duplex backpressure control.
•LEDs. Power LED, FAN Status LED, LED Mode LED, Max PoE LED, and LEDs for each
port.
•Internal open frame power supply.
•Standard NETGEAR 7xx series chassis.
•NETGEAR Green product series power-saving features:
•Automatic power consumption adjustment based on the RJ-45 cable length.
•Per port automatic power down when the port link is down.
•IEEE802.3az, EEE (Energy Efficient Ethernet) compliance.
8
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
Package Contents
Figure 1 shows the package contents of the GS752TP, GS728TP, and GS728TPP Gigabit
Smart Switch.
Rubber
footpads
Installation guide
Rack-mount kit
Resource CD
AC power cord
Figure 1. Package contents
Verify that the package contains the following:
•GS752TP, GS728TP, or GS728TPP Gigabit Smart Switch
•Rubber footpads for tabletop installation
•Rack-mounting kit
•Power cord
•Installation guide
•Smart Switch resource CD with NETGEAR Smart Control Center and user’s manual
If any item is missing or damaged, contact the place of purchase immediately.
9
2
2. Physical Description
This chapter describes the GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch hardware
features. Topics include:
•GS752TP Front Panel and Back Panel Configuration
•GS728TP Front Panel and Back Panel Configuration
•GS728TPP Front Panel and Back Panel Configuration
•LED Designations
•Device Hardware Interfaces
10
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
GS752TP Front Panel and Back Panel Configuration
The GS752TP Gigabit Smart Switch has 48 10/100/1000 Mbps copper ports and four
dedicated 100/1000 Mbps SFP fiber ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
Figure 2 illustrates the front panel of the GS752TP Gigabit Smart Switch.
Power, Fan, PoE Max,
Link/ACT LEDs SFP ports
Reset button
and LED Mode LEDs
Factory
Defaults button
Figure 2. Front panel
The front panel contains the following:
•48 RJ-45 connectors for 10/100/1000 Mbps AutoSensing Gigabit Ethernet switching
ports.
•Ports 1–8 are PoE+ (30W) capable; ports 9–48 are PoE (15.4W) capable.
•Four dedicated 100M/1000 Mbps SFP Gigabit Ethernet switching ports.
•Reset button to restart the device.
•Recessed Factory Defaults button to restore the device back to the factory defaults.
•Select button to change the working mode of the port LEDs with either PoE mode or
Ethernet mode.
•Port Status and Port Speed LEDs.
•Power, Fan Status, Max PoE, and LED Mode LEDs.
Andere Handbücher für ProSafe GS728TP
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere NETGEAR Schalten Handbücher
NETGEAR
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable... Bedienungsanleitung
NETGEAR
NETGEAR GSM7212 - ProSafe Switch Bedienungsanleitung
NETGEAR
NETGEAR SW510 - Switch Bedienungsanleitung
NETGEAR
NETGEAR GS724AT - ProSafe Gigabit Smart Switch Bedienungsanleitung
NETGEAR
NETGEAR GS716T - ProSafe Switch Handbuch
NETGEAR
NETGEAR EN104 - Hub - EN Bedienungsanleitung
NETGEAR
NETGEAR M4350 Series Bedienungsanleitung
NETGEAR
NETGEAR GS108P-100NAS Bedienungsanleitung
NETGEAR
NETGEAR ProSafe GS116v2 Bedienungsanleitung
NETGEAR
NETGEAR GS724T - ProSafe Switch Bedienungsanleitung
NETGEAR
NETGEAR FS105 Bedienungsanleitung
NETGEAR
NETGEAR GSS108E Bedienungsanleitung
NETGEAR
NETGEAR ProSAFE GS116Ev2 Bedienungsanleitung
NETGEAR
NETGEAR GS748T - ProSafe Smart Switch Bedienungsanleitung
NETGEAR
NETGEAR 7300 Series Bedienungsanleitung
NETGEAR
NETGEAR GS748T GS748T GS748T Handbuch
NETGEAR
NETGEAR GSM7312 - ProSafe Layer 3 Managed Gigabit... Bedienungsanleitung
NETGEAR
NETGEAR GS504T - Switch Bedienungsanleitung
NETGEAR
NETGEAR 8800 Series Handbuch
NETGEAR
NETGEAR FSM726S Bedienungsanleitung
