Netphonic NG-48 Series Bedienungsanleitung
Netphonic Systems NG-48UserManual
1
User Manual
NG-48 Series
Gateway
Version 1.02
Netphonic Systems NG-48UserManual
2
Production NG-48 Series Gateway
Version 1.02
Modified by Xiang Xingrong
Description
CONTENT
1 WELCOME..........................................................................................................................................3
2 INSTALLATION.................................................................................................................................3
2.1 Package List ........................................................................................................................3
2.2 Safety Compliances.............................................................................................................4
3. PRODUCT OVERVIEW................................................................................................................. 4
4 CONFIGURATION WITH WEB......................................................................................................6
4.1 User verification..................................................................................................................7
4.2 Current state ........................................................................................................................7
4.3 Network configuration…………………………………………………………………….8
4.3.1 Wide area network(WAN)........................................................................................8
4.3.2 Local area network (LAN) .....................................................................................10
4.4 VOIP configuration ...........................................................................................................11
4.4.1 H.323 configuration ...............................................................................................11
4.4.2 SIP configuration....................................................................................................14
4.5 Advance configuration ......................................................................................................18
4.5.1 Net Service configuration ......................................................................................18
4.4.2 SIP advanced configuratio………………………………………………………..20
4.3.3 Value-added service configuration………………………………………………..23
4.6 Number binding configuration…………………………………………………………...27
4.7 Save and clear configuration……………………………………………………………..31
4.8 Upgrade on-line…………………………………………………………………………..32
4.8.1 Upload WEB page…..…………………………………………………………… 32
4.8.2 FTP download…………………………………………………………………….32
4.8.3Configuration files WEB download……………………………………………….34
Netphonic Systems NG-48UserManual
3
4.9 System management……………………………………………………………………..34
4.9.1 Account management……………………………………………………………..34
1 Welcome
NG-48 series of gateways are innovative gateway that offer a rich set of
functionality and superb sound quality. They are fully compatible with
SIP and H.323 industry standard and can interoperate with many other
SIP or H.323 compliant devices and software on the market.
2 Installation
2.1 Package List
The NG-48 gateway package contains:
1) One NG-48 gateway
2) One universal power adapter
3) One Straight Ethernet cable
4) One Phone line
Netphonic Systems NG-48UserManual
4
2.2 Safety Compliances
The gateway should only be operated with the universal power adapter
provided with the package. Damages to the gateway caused by using
other unsupported power adapters would not be covered by the
manufacturer’s warranty.
3 Product Overview
NG-48 IP Gateway is a next generation IP network facility based on
industry open standard SIP (Session Initiation Protocol) and H.323. Built
on innovative technology, NG-48 IP Gateway features market leading
superb sound quality and rich functionalities.
3.1 key Features
zSupport two models: Bridge and Router(NAT&NAPT).
zNetwork Protocols: TCP/UDP/IP, ICMP, HTTP, DHCP Client (WAN
Interface), DHCP Server(LAN Interface), DNS Client, DNS Relay,
SNTP, PPPoE, FTP, TFTP.
zVoIP Protocols: Support H323 (V4) and SIP (RFC3261, RFC3262,
RFC3264, RFC3265) synchronously.
Netphonic Systems NG-48UserManual
5
zVoice Codecs: G.711(A-law/U-law), G.723.1, G.729A/B, G.726
zRedundancy SIP server (or Gate Keeper): Can auto swap address
between two servers address.
zNAT penetration: Support STUN client, AVS and Citron etc. Can
modify SIP register port, HTTP server port, Telnet server port and
RTP port.
zSupport two SIP server synchronously: Can register two different SIP
server, and can make a call by either proxy.
zSupport standard voice features such as numeric Caller ID Display,
Call Waiting, Hold, Transfer, Do-Not-disturb, Forward, in-band and
out-of-band DTMF, Hotline (off hook autodial), ban outgoing.
zSupport standard encryption and authentication (DIGEST using MD5,
MD5-sess).
zSupport Silence Suppression, VAD (Voice Activity Detection), CNG
(Comfort Noise Generation), Line Echo Cancellation (G.168), and
AGC (Automatic Gain Control).
zProvide easy configuration thru manual operation (Web interface and
Telnet) or automated centralized configuration file via TFTP or HTTP.
zSupport firmware upgrade via TFTP/FTP and HTTP.
zSupport syslog, can send event of gateway to syslog server.
3.2 Hardware Specification
The table below describes the hardware specification.
Item Specification
Netphonic Systems NG-48UserManual
6
Item Specification
Input 110-220V ACPower Adapter
Output 12V DC 1A
WAN 1 10/100Base T RJ-45
LAN 1 10/100Base T RJ-45
Port
FXS 4 RJ11 for phone
Power Consumption 4.8W/2.8W
Operating Temperature 0～60℃
Relative Humidity 5～95%
Volume 280mm*180mm*80mm
Weight 840g
4 Configuration with WEB
The IP Gateway Web Configuration Menu can be accessed by the
following URL: http:// “Gateway-IP-Address”. The default LAN IP
address is “192.168.10.1” and WAN Mode is Dhcp client. If the web
login port of the gateway is configured as non-80 standard port, the user
need to input http://xxx.xxx.xxx.xxx:xxxx/, otherwise the web will show
that no server has been found, and it will be shown as follows:
Netphonic Systems NG-48UserManual
7
4.1 User verification
Users should login before configuring dialogue machine.
Guest account: the default username and password are both “guest”, user
can have a browse of system.
Administrator account: the default username and password are both
“admin”, this user can configure the system.
Note: after inputting username and password, user press carriage
return directly to enter the page.
4.2 Current state
On this page user can gather information of each commonly-used
parameter of the gateway, it is shown as the following figure: the network
section shows the current WAN, LAN configurations of the gateway:
Netphonic Systems NG-48UserManual
8
including gaining way of WAN IP and IP( static state, DHCP, PPPoE),
MAC address, WAN IP address of the gateway, LAN IP address of the
gateway, opening state of LAN DHCP server.
The VoIP section shows the current default signaling protocol in use, and
server parameter in use of each protocol: including GateKeeper IP of
H323, H323ID, whether enables register, whether has registered on GK;
Register server IP of SIP, proxy server IP, whether enables register,
whether has registered on register server, whether enables outbound
proxy, whether enables STUN server.
The Phone line section shows corresponding phone number of each
protocol.
The version number and date of issue have been shown at the end of the
page.
4.3 Network configuration
4.3.1 Wide area network(WAN)
User can view the current network IP linking mode of the system on this
page.
User will be authorized to set the network IP, Gateway and DNS if the
system adopts the static linking mode.
If the system selects DHCP service in the network which is using DHCP
Netphonic Systems NG-48UserManual
9
service, IP address will be gained dynamically.
If the system selects PPPOE service in the network which is using the
PPPOE service, then the IP address will be gained by the set PPPOE ISP
internet and password of the account.
Note: If IP address has been modified, the web page will no longer
respond owing to the modification, so new IP address should be input
in the address field now.
First Table:
Active IP /
Current Netmask/
MAC Address/
Current Gateway
Current gateway IP, subnet mask, mac address and
current gateway IP;
Static/DHCP/
PPPOE
Select acquisition way of IP for WAN; This is single
option; Configure static IP parameter for WAN;
Netphonic Systems NG-48UserManual
10
Static Parameter Configuration:
IP Address Configure static IP address:
Netmask Configure subnet mask;
Gateway Configure IP address of the the gateway;
DNS Domain Configure “dns domain” suffix; if user input
“domain” and it can’t be resolved, the gateway will
add and resolve the “domain” after user input.
Primary DNS Main DNS server IP address.
Alter DNS The second DNS server IP address.
PPPoE Configuration:
Server Service name, if PPPoE ISP has no special
requirement for this name, generally is the default.
User PPPoE account.
Password PPPoE password.
Configure the parameter and then click "apply" to go into effect.
4.3.2 Local area network (LAN)
User can make local area network (LAN) configuration on this page,
when bridge mode is selected, the local area network (LAN)
configuration will no longer go into effect.
Inhaltsverzeichnis
Andere Netphonic Tor Handbücher
Beliebte Tor Handbücher anderer Marken
LST
LST M500RFE-AS Bedienungsanleitung
Kinnex
Kinnex Media Gateway Bedienungsanleitung
2N Telekomunikace
2N Telekomunikace 2N StarGate Bedienungsanleitung
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung
Telsey
Telsey CPVA 500 - SIP Bedienungsanleitung
