Netti BASIC Leitfaden
ACCESSORIES
MD0181 UK 2022-02
III HD
Side supports
Mounting Descriptions
2 My-Netti.com
Model: Netti Side supports
Language: English Version: 2022-02
CONTENTS
1. INTRODUCTION
TO NETTI SIDE SUPPORTS 3
2. NETTI SIDE SUPPORT BASIC 4
2.1 MOUNTING INSTRUCTION NETTI WHEELCHAIRS WITH SQUARE BACK SUPPORT TUBE 4
2.2 MOUNTING INSTRUCTION NETTI WHEELCHAIRS WITH ROUND BACK SUPPORT TUBE 5
2.3 MOUNTING INSTRUCTION NETTI WHEELCHAIRS WITH ROUND BACK TUBE 6
3. NETTI SIDE SUPPORT STABIL 8
4. NETTI S SIDE SUPPORT 10
5. NETTI SIDE SUPPORT CORRECTION
5.1 MOUNTING TO ROUND BACK TUBE NETTI 4U CE 12
5.2 MOUNTING TO SQUARE BACK TUBE 13
6. NETTI SIDE SUPPORT LATERAL SWINGABLE 14
3
Model: Netti Side supports
Language: English Version: 2022-02 My-Netti.com
Please study this manual and also pay careful
attention to the user manual for the wheelchair
where the side supports have been mounted.
Important points are marked with the following
symbols:
Symbol of forbidden actions.
No warranty can be claimed whenever
these actions are implemented.
Symbol of warning.
Whenever this symbol is used,
caution has to be taken.
Symbol for important information.
Symbol for useful tips.
Symbol for tools.
1. INTRODUCTION
TO NETTI SIDE
SUPPORTS
Netti Side supports are a product family of dierent
supports meant for either direct support to the user
upper body or additional to Netti back cushion side
supports.
In this manual the dierent supports are presented
with their mounting description. The intention is
to give an overview to make it easier to choose the
side support most suitable for the user needs.
Before using Netti Side support a seating
assessment should be carried out by
a trained professional.
Each side support must be adjusted to the user.
4 My-Netti.com
Model: Netti Side supports
Language: English Version: 2022-02
2. NETTI SIDE
SUPPORT BASIC
Netti side support Basic is especial designed for users
in need for direct support of upper body stability and
position.
2.1 MOUNTING INSTRUCTION
FOR NETTI SIDE SUPPORT BASIC- FITTING FOR:
NETTI WHEELCHAIRS WITH SQUARE
BACK SUPPORT TUBE
(Netti 4U CE PLUS, Netti III, Netti III HD and
Netti III XHD)
Item number 86145
Netti side support Basic can be adjusted in
height, depth and sidewards.
Before you mount the side support to the wheelchair
you need to dene the long lasting seating position
of the user.
• Find the desired position and mark the height at
the back tube where you want to position the side
support.
• Push the clamp over Velcro and back tube.
• It is recommended to position the clamp with the
Italian grip on top as shown in the illustration on
top of this page.
• The 2 screws xing the clamp to the back tube
should be inserted from the inside.
• Tighten the screws after mounting.
5 mm Allen key
Insert the side support horizontal rod into the xing
bracket. Fix the side support cushion as far inward as
desired. It is easily adjusted by loosening the Italian
grip and slide the cushion in- or outward.
5
Model: Netti Side supports
Language: English Version: 2022-02 My-Netti.com
2.2 MOUNTING INSTRUCTION
FOR NETTI SIDE SUPPORT BASIC - FITTING FOR:
NETTI WHEELCHAIRS WITH ROUND BACK
SUPPORT TUBE (NETTI 4U CE )
Item number 86146
Netti side support Basic can be adjusted in height,
depth and side wards.
MOUNTING TO THE BACK
• Open the back Velcro fabric.
• At the back you will nd 2 threaded inserts
• To mount the star wheels to the back you need to
make 2 holes in the fabric with a screwdriver.
• Afterwards close the zipper again by pulling the
zipper down.
• Mount the adapter plate with the 2 star wheels at
the chairback in the holes you just made.
• With the adapter plate you can adjust the side
support sideways.
HEIGHT ADJUSTMENT
• To adjust the side support height you need to use
the vertical adapter.
• Before adjusting the height please dene the long
lasting seating position of the user.
• Loosen the 2 screws and adjust the desired height.
• Tighten the screws rmly.
DEPTH ADJUSTMENT:
• You can adjust the side support pad along the
slotted hole on the outside of the side support.
• Loosen the 2 screws and adjust the desired depth.
• Tighten the screws rmly.
5 mm Allen key
6 My-Netti.com
Model: Netti Side supports
Language: English Version: 2022-02
2.3 MOUNTING INSTRUCTION
FOR NETTI SIDE SUPPORT BASIC- FITTING FOR:
NETTI WHEELCHAIRS WITH ROUND BACK TUBE
Netti 4U BASE Item number 88468
The side support Basic is height, width and depth
adjustable.
Open the clamp
4 mm Allen key
Place the 2 clamp half’s around the back tube
of the wheelchair.
Keep all screws loose (to be tightened after
tting with side support)
Position the clamp in the area shown on the right.
Adjust the clamp at the desired height and tighten
the screws so that the clamp can be positioned later.
Turn the Italian grip to open the horizontal hole in
the clamp.
You may also need to unscrew the grub screw
on the bottom of the clamp by using
3mm Allen key
Screws on side support clamp kit 88295
should be tightened enough to avoid
rotation of side support when this side
support is tted on the back tube round
Insert the side support to the clamp and turn the
lever clockwise to x the side support in the clamp -
see illustration on top of this page.
7
Model: Netti Side supports
Language: English Version: 2022-02 My-Netti.com
As soon as the user of the wheelchair sits in the
wheelchair, position the side support in the
desired height and width.
Adjust the angle of the side support on the
backrest tube, by moving the side support
horizontal rod inwards or outwards.
As soon as you have nished the adjustment,
tighten the 2 screws rmly.
The position of the clamp can be secured
with the 2 at the front of the clamp
additional grub screws.
To prevent unauthorized removal of the side
support, you can tighten the screw opposite
of the clamp lever with a 3 mm Allen key.
Side support Basic depth adjustment:
loosen the 2 screws at the back of the side support
pad and move the pad to the desired depth.
Tighten the 2 screws rmly.
You can use the side support for Netti round
tube clamp on the left or the right side.
To use the pad for the left or right side, turn the
clamp 180° and mount the clamp lever on top and
the grub screw at the bottom.
8 My-Netti.com
Model: Netti Side supports
Language: English Version: 2022-02
3. NETTI SIDE
SUPPORT STABIL
Netti side support Stabil is developed to mainly
give extra stability to Netti back cushions - with side
supports. It can also be used separately.
Netti side support Stabil is mounted to the
wheelchair chair-back proles and is height and
angle adjustable. It can be swung aside to make
access to the user more convenient.
Item Item number
Side support Stabil Left 26830
Side support Stabil Right 26843
MOUNTING
Netti side support Stabil is prepared for mounting
to round and square backrest tubes. The black
enclosed plastic bushing is used when mounting to
square backrest tubes.
6 mm Allen key and a sharp knife
The Netti side support Stabil can be tted with a cover.
• Open the Velcro on the cover
• Pull it over the side support plastic plate
• Fix it with the Velcro
9
Model: Netti Side supports
Language: English Version: 2022-02 My-Netti.com
After tting the backrest cushion:
• Find the correct height for the side support.
The support should be parallel with the
integrated side support of the backrest
cushion.
• If the Velcro back has a cut-out for the side
support, place the side support there.
• If there is no opening in the Velcro back, cut a
piece of the Velcro backrest to give room for
the clamp to t around the backrest tube at
desired height.
• When mounting on a square tube, place the
enclosed plastic bushing around the backrest
tube before xing the clamp around the
tubing.
• Mount the clamp and tighten the 6 mm
screws rmly.
Before the screws are tightened, you can choose the
angle of the clamp and thereby increase or decrease
the stability.
To release the side support and swing it outward,
pull the release button out.
10 My-Netti.com
Model: Netti Side supports
Language: English Version: 2022-02
4. NETTI S SIDE
SUPPORT
Netti S side support is developed to mainly give extra
stability to Netti back cushions - with side supports. It
can also be used separately.
Netti S side support is mounted to the wheelchair
chair-back proles and is height and angle
adjustable.
Item Item number
Side support Netti S 88810
MOUNTING
6 mm Allen key
• Remove the chair-back cushion.
• Fold the chair back forward till it lay at on the
seat.
• Insert 2 square nuts into the chair-back prole.
There is an opening in the prole slot where
the white arrow is pointing.
• Slide the nuts upwards
• Place the side support over the back prole as
shown on the illustration.
• Fix the screws into the 2 square nuts you
already inserted.
• Adjust the height and width of the side
support position.
• Check that the back cushion covers the side
support well and no sharp edges are exposed
to the user.
Andere Handbücher für BASIC
1
Dieses Handbuch passt für folgende Modelle
9
Inhaltsverzeichnis
Andere Netti Rollstuhl Handbücher
Netti
Netti AdaptPro Bedienungsanleitung
Netti
Netti 4U CED XL Bedienungsanleitung
Netti
Netti BASIC Leitfaden
Netti
Netti GMDN 41620 Bedienungsanleitung
Netti
Netti 4U-Family Bedienungsanleitung
Netti
Netti Mobile Bedienungsanleitung
Netti
Netti Vision Bedienungsanleitung
Netti
Netti 4U CED XL Bedienungsanleitung
Netti
Netti Dynamic System Bedienungsanleitung
Netti
Netti Tray with lock Leitfaden
Netti
Netti Vision GMDN 41630 Bedienungsanleitung
Netti
Netti III Comfort HD Bedienungsanleitung
Netti
Netti Uno Seat Bedienungsanleitung
Netti
Netti GMDN 41620 Bedienungsanleitung
Netti
Netti GRANDIS Bedienungsanleitung
Netti
Netti Mobile Bedienungsanleitung
Netti
Netti DYNAMIC S Bedienungsanleitung
Netti
Netti Dynamic System Bedienungsanleitung
Netti
Netti III Series Bedienungsanleitung
Netti
Netti Dynamic System Leg support Bedienungsanleitung
