NetView NVK801 Bedienungsanleitung
User Manual
NVK801
4K KVM
i-Tech Company LLC
TOLL FREE: (888) 483-2418 • EMAIL: [email protected] • WEB: www.iTechLCD.com
Legal Information
First English printing, January 2020
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
AB
Figure 1.
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
Installation for standalone KVM
■Install each bracket using screws
provided shown in Figure 1.
M3.2 x 4.5 mm M4 x 10 mm
■Fix the KVM into the rack
Screw A: 2 pcs Screw B: 8 pcs
Contents
< Part. 1 > 4K KVM
1.1 Package Contents P.1
1.2 KVM port connection P.2
1.3 Specifications P.3
< Part. 2 > 4K KVM Usage
2.1 KVM Button P.4
2.2 KVM Hotkey P.5
NVK801
P.1P.1
4K KVM
KVM unit
NVK801
< Part 1 > 4K KVM
< 1.1 > Package Contents
• 4K KVM unit x 1
• Mounting set w/ bracket & screws x 1
• Power adapter w/ power cord ( for KVM ) x 1
NVK801
IP console, remote console, daisy-chain and OSD menu are NOT available for this model.
12345678
Mouse USB HubKeyboard
Video
P.2
4K KVM
< 1.2 > KVM port connection
4K KVM Cable
NK6DP : 6 feet DP KVM cable
( Server end : DP + USB-A )
( KVM port : HDMI + USB-B )
NK6H : 6 feet HDMI KVM cable
( Server end : HDMI + USB-A )
( KVM port : HDMI + USB-B )
HDMIDP NK6DP KVM cable NK6HKVM cable
KVM port x 8
( HDMI + USB-B )
Local Console
1 x HDMI 2.0
2 x USB-A ( USB Hub )
2 x USB-A ( KB / MS )
USB-AUSB-A
12345678
Mouse USB HubKeyboard
Video
P.3P.3
4K KVM
< 1.3 > Specifications
NVK801
▀KVM Port
Number of ports : 8
Connector : HDMI 2.0 + USB-B ( Video + KB / MS )
Resolution : 16 : 9 - max. 3840 x 2160@30Hz
16 : 10 - max. 1920 x 1200@60Hz
4 : 3 - max. 1600 x 1200@60Hz
▀Local Console
Keyboard / Mouse : 2 x USB-A
Video : 1 x HDMI 2.0
Resolution : 16 : 9 - max. 3840 x 2160@30Hz
16 : 10 - max. 1920 x 1200@60Hz
4 : 3 - max. 1600 x 1200@60Hz
▀Management
PC Selection : Front button & keyboard hotkey
▀Compatibility
Hardware : HP / IBM / Dell PC, Server and Blade Server
SUN / Mac
OS Support : Windows / Linux / Unix / Mac OS
▀Power
Input : Auto sensing 100 to 240VAC, 50 / 60 Hz
Consumption : Max. 10W
▀Regulatory
Safety : FCC & CE certified
Environment : RoHS2 & REACH compliant
▀Environmental Operating Storage / Non-operating
Temperature : 0 to 55°C degree -20 to 60°C degree
Humidity : 20~90%, non-condensing 5~90%, non-condensing
Altitude : 16,000 ft 40,000 ft
Shock : 10G acceleration (11ms duration)
Vibration : 10~300Hz 0.5G RMS random
▀Product Information
Dimension (W x D x H) : 443 x 171 x 44 mm / 17.4 x 6.7 x 1.73 inch
Net weight : 2.5 kg / 5.5 lb
▀Packing Information
Dimension (W x D x H) : 500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch
Gross weight : 5.4 kg / 11.9 lb
P.4
4K KVM Usage
< Part 2 > Usage
< 2.1 > KVM Button
Bank no. 7-Segment BANK LED indication
PC port LEDs Online : Blue LED on indicating a PC is connecting to the port
Active : Green LED on indicating a selected channel
Channel button Press to select channel from 1 to 8
Power ON
■Turn offall servers and KVM switches
■Make sure all cables / connectors are properly connected
■Recommend Power ON sequence is monitor, KVM switch finally computer
Front Panel - Port LED Indications
PC port LEDs Channel
button
8 ports
4K 60
Hz
KVM
P.5P.5
4K KVM Usage
Remarks:
■Example of “Scroll Lock + Scroll Lock + Port no.”
- Port No. : 1 to 8
- e.g. Port 4 : Scroll Lock + Scroll Lock + 4
- e.g. Port 8 : Scroll Lock + Scroll Lock + 8
■You must press the hotkey within 3 seconds
■A beep sound will be heard for successful entering
< 2.2 > KVM Hotkey
Hotkey Function
Scroll Lock + Scroll Lock + Switch to previous port
Scroll Lock + Scroll Lock + Switch to next port
Scroll Lock + Scroll Lock + Port no. Switch to specific port
Scroll Lock + Scroll Lock + SAuto scan for powered on PC
Scroll Lock + Scroll Lock + BEnable / Disable beeper sound
Hotkey Label
Inhaltsverzeichnis
Andere NetView Schalten Handbücher
