New Air AF-340 Bedienungsanleitung
IMPORTANT SAFEGUARDS
Please read all these instructions carefully before using this product.
1. Read all instructions before operating.
2. Disconnect the power plug before dismantling, assembling, or cleaning.
3. Avoid touching mobile parts of the unit.
4. Make sure the unit is on a dry and even surface.
5. Never insert fingers, pencils or any other objects though the guards whenever the power plug is
connected, especially while running.
6. Do not use the appliance for any other purpose than its intended use.
7. The fan must not be used if the guards are not fastened according to instructions.
8. When the power cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
9. Do not use your appliance with an extension cord unless it has been checked and tested by a
qualified electrician or electrical supplier.
10.The appliance is not intended for use by young children or elderly unless they have been
adequately supervised by a responsible person to ensure safety that they can use the appliance
safely.
11.Young children or elderly persons should be supervised, and children should not play with the
unit.
12.All interventions to the unit made by a non-qualified person will cause the guaranty on the unit to
be no longer valid.
13.Do not place the machine on soft or uneven ground in order to prevent it from leaking or making
noise.
14.Do not place the appliance on its side, back, or front while storing or transporting. If you have
received the unit after it has been transported, leave it standing in an upright position for at least
two hours before turning on.
○
1
IMPORTANT PRODUCT INFORMATION
Congratulations on your purchase of this versatile product which combines a
room cleaner, humidifier, and air cleaner. Please read these instructions
carefully to get the best cooling effect from your product.
For the best performance of your Evaporative Cooler it should be filled with water, and ice if
available, and positioned in a location that will create a ‘flow through’ air effect. The greatest cooling
effect will be felt if the unit is operated in a partly opened doorway or window with the cooled air
directed into the room. It is also important to have a door or window partly opened away from the air
cooler, in order to create the ‘flow through’ effect. Ifthisarrangementcannotbemet,theAirCooling
Systemwillbelessefficient.
PARTS DESCRIPTIONS
○
1○
2○
3○
4○
5○
6○
7○
8
1. Control Panel
2. Front Louvers
3. Carrying Handle
4. Power Cord Wind
5. Honeycomb Water Curtain
6. Carbon Filter
7. TiO2 Filter (Optional)
8. Rear Screen
9. Water Level Indicator
10.Castors
11.Water Inlet
12.Drainage
13.Remote Control
○
9○
10 ○
11 ○
12 ○
13
○
2
HOW TO USE
ON / SPEED ADJUSTMENT: To turn the unit on, press the “ON/SPEED” button. The unit will
automatically start in the low speed position. Each time the button is pressed, the speed increases
from low to medium, and then to high. The control panel will show the power
indicator illuminates as speed is increased.
TIMER: Press the timer button to set the time on the fan. The running time can be set from 1 hour
to 8 hours. Each time the button is pressed, the time increases. To switch this function off, keep
pressing the button until 0 time is displayed.
COOL: This unit is designed for spot cooling. To start the evaporative function of the
unit, press the COOL button and the water droplets icon will become illuminated.
AIRFLOW (SWING): This button gives you the choice of having either a fixed or continuously
sweeping airflow. For a continuously sweeping airflow, switch the oscillation control
to the on position. If you require the airflow to be delivered in a fixed direction,
switch the swing control off.
ION: This button starts the ionizer function. An ionizer introduces negative ions into the air that
work to purify the air in the room. When this function is on, the icon shown on the
right will be illuminated. Press the ion button again to turn this function off.
REMOTE CONTROL: This unit comes with a full function remote control. The remote requires
batteries. The effective range is approximately 6m.
○
3
PREPARATION AND OPERATION
To obtain the optimum performance from your Air Cooler, we recommend the
following procedures be followed:
1. With first use, add a teaspoon of dishwashing liquid or fabric softener to the water. This will
ensure that the curtain absorbs the water for the maximum cooling effect. You may find it
necessary to repeat this step from time to time, when or if the curtain is not adequately wet.
2. Remove the unit from its packaging.
3. To begin using the cooling function, open the water inlet located on the side of the unit. Fill
the WATER ONLY compartment with cold, clean water. Do not overfill and check the water
level at the front.
4. For extra cooling power, put ice into the machine through the water inlet.
5. Remember to always use clean water (not tap water) and not allow the same water to stay in
the machine for extended periods of time. It is recommended that any water left in the
machine for three or more days should be drain through the provided drain plug.
6. Make sure the drain plug is secure and tight before filling. After draining water, make sure
the drain plug is refitted correctly and tightly again.
○
4
CARE AND MAINTENANCE
Never allow the air filter to be blocked in any way, as this will impair the
efficiency of the machine. Pushing the unit up against a wall, or operating the
unit near to long curtains or drapes will also impair the airflow and efficiency of
the unit.
REAR AIR FILTER
Disconnect the machine from the power supply and remove the rear screen. Remove the top filter
fixer and then take out the honeycomb filter. Use a vacuum cleaner to remove loose dust and dirt
and replace. Be sure to refit the honeycomb filter and rear screen securely. NEVER OPERATE
THE UNIT WITHOUT THE FILTER IN THE CORRECT POSITION.
WATER TANK
If the unit is not being used on a regular basis, it is not necessary to clean the water tank regularly.
However in areas containing hard water, deposits will build up, so it is recommended to clean with
mild soapy water once every six months.
1. Disconnect the appliance from the main power supply.
2. Completely remove the rear screen and honeycomb filter.
3. Remove any reachable deposits or dirt from within the tank with a cloth and mild soapy
detergent.
4. Flush with clean water and then drain through the drain plug.
5. Repeat this procedure if necessary and replace all parts, making sure the filters and rear
screen are properly in place.
OUTSIDE CABINET
Use warm mild soapy water and cloth. Do not use abrasive products. Be careful to ensure the
control panel does not come into contact with water or any other liquids.
SPECIFICATIONS
Model No. AF-340 AF-350
Voltage 120V / 60Hz 120V / 60Hz
Watts Cooling 140W Cooling 200W
Water Tank Capacity 20 L 20 L
Net Weight 22 lb 22 lb
Selection Speed 3 3
Electronic / Manual Control Electronic Electronic
○
5
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere New Air Klimaanlage Handbücher
New Air
New Air AC14000E Bedienungsanleitung
New Air
New Air AF-351 Bedienungsanleitung
New Air
New Air EC300W Bedienungsanleitung
New Air
New Air Air Cooler AF-320 Bedienungsanleitung
New Air
New Air AC-14100 Bedienungsanleitung
New Air
New Air ACP-1000H Bedienungsanleitung
New Air
New Air AC-12200E Bedienungsanleitung
New Air
New Air AC-10000E Bedienungsanleitung
New Air
New Air AC-10100E Bedienungsanleitung
New Air
New Air Air Cooler AF-330 Bedienungsanleitung
New Air
New Air NAC08KWH00 Bedienungsanleitung
New Air
New Air ACP-1300E Bedienungsanleitung
New Air
New Air AC-12000E Bedienungsanleitung
New Air
New Air NEC500WH00 Bedienungsanleitung
New Air
New Air NAC12KWHD3 Bedienungsanleitung
New Air
New Air NAC12KWH00 Bedienungsanleitung
New Air
New Air AC-12000E Bedienungsanleitung
New Air
New Air AC-10100E Bedienungsanleitung
New Air
New Air AC-12000E Bedienungsanleitung
New Air
New Air ACP-1300H Bedienungsanleitung
