Newcon Optik DN 533 Bedienungsanleitung

Operation Manual

DAY / NIGHT VISION

RIFLESCOPE

DN 532 / DN 533

105 Sparks Ave., Toronto, ON M2H 2S5, Canada

IMPORTANT INFORMATION

Read prior to activation.

DN 532/DN 533 is a sophisticated electronic device. To

operate it properly, please read this manual carefully.

Ignoring operation procedures described in this

manual will void your warranty.

NEVER disassemble the unit. This device contains a

source of high voltage, which may be hazardous to

your health.

NEVER open objective lens of an active unit in bright

light, including daylight. In the daytime objective lens

must be covered by caps. A tiny hole in each cap

provides enough light for daytime testing.

NEVER aim active unit at intense light sources, such

as lights, headlamps, campfires, the Moon, etc.

NEVER reverse the polarity of a battery.

NEVER connect the unit to external power sources.

ALWAYS remove battery when not in use for a long

period.

ALWAYS keep the objective lenses covered when not

in use.

ALWAYS store in a warm dry place.

Precautions

DN 532/DN 533 is a sophisticated precise optical

instrument equipped with electronics. It should be

handled with due care:

Unit contains fragile components. Avoid impacts,

dust, moisture and sharp changes of temperature.

Do not touch the optical surfaces other than for

cleaning. Doing so may damage the anti-reflection

coating.

Clean optical surfaces with professional lens cleaning

supplies.

Use only a soft clean cloth to clean the exterior of the

device.

Keep away from sources of heat, such as heating

appliances, sunlight or central heating.

Switch off the unit and remove the battery during the

extended periods of non-operation.

Do not keep the device at temperatures higher than

60oC (140oF).

Do not apply excessive force or pressure to the lens

assembly, movable parts and thread connections.

Small dark and/or light points may be seen in the field

of view due to considerable optical magnification of

the eyepiece. This does not affect the operational

capabilities of the device.

CONTENTS

1. BRIEF DESCRIPTION 3

1.1 Overview 3

1.2 Key Features 5

2. UNIT EXTERIOR VIEW 8

3. DELIVERY SET 9

3.1 Standard delivery set 9

3.2 Optional accessories: 9

4. SPECIFICATIONS 10

5. OPERATION 12

5.1 Changing eyepieces 12

5.2 Using the scope in the daytime 13

5.3 Using the scope in the nighttime 14

5.4 Battery installation 14

5.5 Night time operation 15

5.6 Switching the unit off 15

6. INSTALLATION ON A RIFLE 16

6.1 Adjustment procedure 16

7. TAKING PHOTOS AND VIDEO SHOOTING 19

7.1 Attaching Unit to photo/video camera 19

7.2 Diaphragm and shutter speed 21

8. STORAGE AND MAINTENANCE 21

9. TROUBLESHOOTING 22

9.1 The scope does turn on 22

9.2 The target does not appear in focus. 22

9.3 Image has disappeared. 22

9.4 Condensation accumulates on the parts 23

9.5 Black dots on the screen 23

9.6 Bright spots on the screen 23

10. WARRANTY 24

11. CUSTOMER SUPPORT 26

12. ACCEPTANCE CERTIFICATE 27

1. BRIEF DESCRIPTION

Overview

DN 532/DN 533 device (the unit) is a universal

riflescope, intended for shooting and around the clock

observation. The unit has two eyepieces – for day and

night observation. The night vision eye piece has an

integrated IR illuminator.

Powerful high light ratio optics of the daytime part

provides 7x or 11x magnification. The night-time

eyepiece contains an image

intensifier tube, which amplifies light in visible and near

infrared spectrum.

Unit provides night recognition range of 400-800 m,

system magnification 3.7x or 6x times and visual angle

7.4 (7x) or 4.6 (11x) degrees.

Fig 1. Day time configuration

Fig 2. Night time configuration

Night time eyepiece can be used independently as a night

time monocular.

3. Ni

ht vision e

iece

Key Features

All known models of day/night scopes with removable

eyepieces use standard optic scheme of a day-vision scope

with 11-13 lenses. As a rule, the actual F-number of all

system does not exceed 3.0 (sometimes 2.0), which is not

enough for the night vision equipment. Also, as common

day time scopes have relatively small field of view, in a

night mode only small central part of the electronic tube

working area is used. A unique 23 lens design provides

the unit a 2-2.5 stronger light transmission (F 1.5 with 66

mm aperture), twice wider field of view and entire

working area of the photocathode.

High resolution 18 mm Image Intensifier Tube and

special light-collecting optics provide bright, sharp

image of consistent quality from the center to the

edges.

Powerful IR illuminator (optional) is effective for up

to 200 m

Unit is equipped with automatic brightness protection

Camera/video adaptable

Precise internal windage/elevation adjustments

Standard weaver mount or optional weaver rail or

side rail mounts

Long eye relief

The scope is water resistant and can be used in rain.

Using the Night Vision Eyepiece as monocular

As standard the NV monocular gives an inverted (upside-

down) image.

To provide a ‘normal’, non-inverted image, you need to

attach an optical inverter

to the back of the NV’s existing eyepiece (4). This is done

by screwing it in clockwise.

Warning ! Do not overtighten or misalign the inverter.

The NV Eyepiece is now ready for use as a night vision

monocular.

To increase the magnification of the NV Eyepiece

(standard magnification 1x),

you can use the optional 3x magnifier lens which provides

3x image magnification.

The 3x magnifier lens can be fitted in two ways:

- Install the magnifier 3x with the supplied adapter ring

(2).

Screw the adaptor ring on to the rear of the magnifier

lens. Push the lens/adaptor ring over the front of the NV’s

lens. This allows a quick push on/pull off magnification

capability, but is not designed for long term observation.

- Leave the adaptor ring (2) off and screw the magnifier

lens directly in to the screw

thread inside the front of the NV’s objective lens. This is

a more secure assembly designed for long term

observation.

Appearance of the Night Vision Eyepiece with

magnifier 3x

Fully

1 - Magnifier lens 3x

2 - Adapter

3 - Night Vision Eyepiece

4 - Optical inverter

Inhaltsverzeichnis

Andere Newcon Optik Zielfernrohr Handbücher

Newcon Optik

Newcon Optik LAM 10M IR Bedienungsanleitung

Newcon Optik

Newcon Optik NVS 10MG Bedienungsanleitung

Newcon Optik

Newcon Optik NC 3-12x50 Bedienungsanleitung

Newcon Optik

Newcon Optik NVS-33 Bedienungsanleitung

Newcon Optik

Newcon Optik DN140M Bedienungsanleitung

Newcon Optik

Newcon Optik NVS 4 Bedienungsanleitung

Newcon Optik

Newcon Optik DN-140 Bedienungsanleitung

Newcon Optik

Newcon Optik NVS 22-2XT Bedienungsanleitung

Newcon Optik

Newcon Optik DN482 Bedienungsanleitung

Beliebte Zielfernrohr Handbücher anderer Marken

Leupold

Leupold Hunting Equipment Benutzerhandbuch

ATN

ATN PS-40 Bedienungsanleitung

Bushnell

Bushnell ET3124F Bedienungsanleitung

ATN

ATN LTAD-SN Bedienungsanleitung

ATN

ATN MARS4-4 Bedienungsanleitung

Nikon

Nikon 8442 - Omega Muzzleloader Scope 1.65-5x36 Bedienungsanleitung

Pulsar

Pulsar Trail Series Bedienungsanleitung

ATN

ATN 10x65Z-Army Mil-Dot Bedienungsanleitung

ATN

ATN Aries 330 “Warrior” Bedienungsanleitung

ATN

ATN Aries MK Bedienungsanleitung

ATN

ATN ELCAN SpecterCT Bedienungsanleitung

FLIR

FLIR ThermoSight T50 Bedienungsanleitung

ATN

ATN Daytime 3-9x55LU Bedienungsanleitung

ATN

ATN Ultra Sight Digital Compact Bedienungsanleitung

ATN

ATN 10x65Z Bedienungsanleitung

Pulsar

Pulsar Digisight Ultra N450 Bedienungsanleitung

Nikon

Nikon 1.65-5x36 Bedienungsanleitung

Nikon

Nikon OMEGA Muzzleloading 3-9x40 Bedienungsanleitung