Newtec AZ420 Bedienungsanleitung

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

User Manual

for

AZ420 Telco Satellite Modem

version 2.0

User Manual for AZ420 Telco Satellite Modem

version 2.0

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

The material contained in this document is confidential and intended for use only

by parties authorised by Newtec.

stored in a retrieval system, or transmitted, in any form or by any means whether,

electronic, mechanical, or otherwise without the prior written permission of

Newtec Cy N.V..

Newtec Cy N.V.

Laarstraat 5

9100 Sint-Niklaas, Belgium

General: +32 (0)3 780 65 00

www.newtec.eu

Fax +32 (0)3 780 65 49

General: general@newtec.eu

Compliancy Statements

User Manual for AZ420 Telco Satellite Modem

version 2.0

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

COMPLIANCY STATEMENTS

TO WHOM IT MAY CONCERN

EC DECLARATION OF CONFORMITY

We,

Newtec Cy N.V.

Declare that the following product:

Product number:

with type identifier: NTC/2210 (IF) and NTC/2215 (L-Band)

to which this declaration relates is in conformity with the essential requirements of

European Union Directive 1999/5/EC Radio and Telecommunication Terminal

Equipment Directive Essential Requirement 3.1(a), 3.1 (b), 3.2.

Done at St-Niklaas, on 05 February, 2010

Serge Van Herck,

CEO

Compliancy Statements

User Manual for AZ420 Telco Satellite Modem

version 2.0

iii

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

TO WHOM IT MAY CONCERN

Restriction of Hazardous Substances Directive (RoHS)

(Directive 2002/95/EC)

The undersigned hereby confirms the following statement:

We hereby declare that this equipment is compliant to the RoHS Directive

2002/95/EC.

Done at St-Niklaas, on 05 February, 2010

Serge Van Herck,

CEO

Safety Regulations

User Manual for AZ420 Telco Satellite Modem

version 2.0

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

SAFETY REGULATIONS

Please read this chapter before you install and use this equipment.

To ensure your safety, the equipment has been designed to comply with the

following safety standard:

IEC 60950 Safety of Information Technology Equipment

Before you start to install and operate the modem, please make sure you observe

the following points:

•The equipment described in this manual is designed to be used by properly

trained personnel only. Only qualified personnel who are aware of hazards

involved may adjust, maintain and repair the exposed equipment.

The AZ420 Telco Satellite Modem has no operator serviceable

parts inside. Refer servicing to qualified personnel. To prevent

electrical shock, do not remove covers.

•To use the equipment correctly and safely, it is essential that both operating and

servicing personnel follow generally accepted safety procedures in addition to

the safety precautions specified in this manual. Warning and caution statements

and/or symbols are marked on the equipment when necessary. Whenever it is

likely that safety protection is impaired, immediately switch off the equipment

and secure it against unintended operation. Inform the appropriate servicing

authority about the problem. For example, safety is likely to be impaired if the

equipment fails to perform the intended measurements or shows visible

damage.

Caution1:

FOR CONTINUED PROTECTION AGAINST FIRE, REPLACE

LINE FUSES ONLY WITH SAME TYPE AND RATING (5 X 20mm

T3.15 A/250v TYPE T or slow-blow).

Caution 2:

THERE IS RISK OF EXPLOSION IF THE BATTERY IS

REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED

BATTERIES ACCORDING TO THE INSTRUCTIONS.

Safety Regulations

User Manual for AZ420 Telco Satellite Modem

version 2.0

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

Additional safety requirements for Finland, Norway and

Sweden

Telecommunication connections and cable distribution system.

Special conditions apply to the use of this equipment in Finland,

Sweden and Norway due to different earthing arrangements in

these countries. Therefore it is essential that the installation is

done by authorized personnel and according to the national

requirements only.

This equipment is specified for use in a restricted access location

only, where equipotential bonding has been applied and which

has provision for a permanently connected protective earthing

conductor.

A protective earthing conductor must be installed by a Service

Person.

EMC Information

Relevant EMC information (to FCC rules)

This equipment has been tested and was found to comply with the limits for a class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and

radiates radio frequency energy. If not installed and used in accordance with the

instruction manual, it may cause harmful interference to radio communications.

Do not operate this equipment in a residential area, as it is likely to cause harmful

interference. When this is the case, you will be required to correct the interference

at your own expense.

IESS308 compliancy

This equipment is compliant with IESS308 (page 56, case 1-4, figure 16-19) timing

and buffer arrangements.

Safety Regulations

User Manual for AZ420 Telco Satellite Modem

version 2.0

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

Environmental

Operating the equipment in an environment other than that stated in the

specifications also invalidates the safety compliance.

Do not use the equipment in an environment in which the unit is exposed to:

•Unpressurised altitudes higher than 2000 metres;

•Extreme temperatures outside the stated operating range;

•Operating temperature range 0 to + 40 °C (*);

•Excessive dust;

•Moist or humid atmosphere above 95% RH;

•Excessive vibration;

•Flammable gases;

•Corrosive or explosive atmospheres;

•Direct sunlight.

(*): DC power supply - Operating temperature range 0 to + 37 °C.

Use a slightly damp cloth to clean the casing of the equipment. Do not use any

cleaning liquids containing alcohol, methylated spirit or ammonia etc.

Maintenance

User Manual for AZ420 Telco Satellite Modem

version 2.0

vii

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

MAINTENANCE

Standard Warranty

Newtec guarantees the durability and satisfactory electrical and mechanical

performance of the equipment to a maximum period of one (1) year from the date

of delivery, unless otherwise agreed to, in writing. The warranty applies only to

manufacturing defects and provided that handling, installation, maintenance and

adjustment of the equipment are carried out in line with the instructions provided by

Newtec and in line with good practice. The warranty does not apply to items,

normally consumed in operation, or which have a normal lifetime inherently shorter

than the warranty stated above, such as, without limitation, fuses or lamps. Any

defect due to normal wear and tear, or caused by transportation or Force Majeure

events, or attributable to the Customer’s improper use, neglect, storage, operation

handling or maintenance of the goods or any part thereof, are excluded from the

warranty. During the warranty period, Newtec shall, at its sole discretion, replace or

repair the defective subparts or units at the source factory. All transportation costs

shall be borne and prepaid by the Customer.

Care Pack

Guidelines

Order a Care Pack

Care Pack is to be purchased along with Newtec professional equipments. The

Care Pack coverage starts from the date of shipment. Please contact

sales@newtec.eu for more details.

After purchase the customer needs to register his Care Pack. On the Newtec

equipment, the customer will find a registration label inviting him to self-register on

portal www.newtec.eu/support.

About this Manual

User Manual for AZ420 Telco Satellite Modem

version 2.0

viii

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

ABOUT THIS MANUAL

This document provides a quick overview on how to easily set up the modem for

the most common use cases.

This document is intended to help you:

•Find your way around the Graphical User Interface (GUI).

•Understand the different possibilities of the modem with a Telco interface board.

Cautions and Symbols

The following symbols appear in this manual:

A caution message indicates a hazardous situation that, if not

avoided, may result in minor or moderate injury. It may also refer

to a procedure or practice that, if not correctly followed, could

result in equipment damage or destruction.

A hint message indicates information for the proper operation of

your equipment, including helpful hints, shortcuts or important

reminders.

A reference message is used to direct to an internal reference

within the document, a related document or a web-link.

Version History and Applicability

Document version Date Subject Author Comment

Version 1.3 November 20th,

2008

AZ420 NWH Block diagram

and

demod.statistics

implementation,

RoHS Directive

update

Version 1.4 March 31st,

2009

AZ420 JGEI/

EDE

Add clocking

description

Version 1.5 April 3rd 2009 AZ420 EDE NoDE

Version 2.0 January 20th AZ420 JVPU Release 7

About this Manual

User Manual for AZ420 Telco Satellite Modem

version 2.0

SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung