Nexar HaloCam Bedienungsanleitung
The Complete Package for Safety & Video Evidence
START HERE!
WELCOME TO
In this manual, we’ll show you how to install the HaloCam in your vehicle and connect it
to the Nexar app for the safest driving experience possible.
Let’s go!
Detects &
records
events
Download
videos from
any device
Unlimited
cloud storage
1-Click Report
for collisions
Wide angle
view
| 3
1.
2.
If you haven’t yet downloaded the Nexar app, do so first:*
Download the app by searching for ‘Nexar’ in
the App Store (iPhone) or Google Play (Android)
Open the app, register, and enable all necessary settings when prompted.
Be sure to enable Location Services so Nexar can automatically start and stop when you
start and stop driving
DOWNLOADING THE NEXAR APP
Do you share your car?
If so, make sure each driver downloads
Nexar and connects to the camera.
*We recommend doing this while connected to a WiFi network
1.
2.
3.
4.
5.
6.
7.
HaloCam
Holder
USB charger
USB power cable
Installation tool
Micro SD card
Cable clips
USB power cable
Installation tool
Micro SD card
Wire clips
PACKAGE CONTAINS
| 5
1.
2.
3.
Insert micro SD card into the micro SD slot on the camera until you hear a click
Insert the holder into the holder slot on the camera and slide to lock in place
(The SD card may be pre-slotted for you)
Remove sticker from camera lens
ATTENTION: Do NOT remove the micro SD from the camera while camera is ON. Doing
so may cause permanent damage to the camera! Turn camera OFF before ejecting card.
Hold camera with lens
facing downwards
Insert micro SD card
with metal pins
facing upwards
ASSEMBLING THE CAMERA
1. Connect the charging cable to the camera’s POWER port
ACTIVATING THE CAMERA IN YOUR VEHICLE
| 7
2.
3.
4.
Plug the USB charger into your vehicle’s power socket
Plug the other end of the charging cable into the USB charger
Start your vehicle. You should see a green light indicating that the camera is powered
on, and a blue blinking light indicating that the camera is waiting to be paired
1A
1.
2.
3.
4.
5.
6.
Open your iPhone’s settings
Tap on WiFi
Connect to the WiFi network
that begins with ‘DIRECT-Nexar (5G)’
Enter password: 12345678
Don't worry, your cellular data is still
available
The blue indicator light on the
camera should now be steady
DO YOU HAVE AN IPHONE?
DIRECT-Nexar (5G)
Wi-Fi
Wi-Fi
| 9
DO YOU HAVE AN ANDROID?
1.
2.
3.
4.
5.
6.
Open the Nexar app
Tap the menu button in the top left corner
Tap Settings
Tap External camera
After a few seconds, the camera and your
phone will connect automatically
The blue indicator light on the camera should
now be steady
lens towards the road
windshield
sticker
1.
2.
3.
4.
5.
INSTALLING THE CAMERA IN YOUR VEHICLE
Open Nexar and tap the car icon (for Android)
or the Drive button (for iPhone)
Wait a few moments for your camera’s feed to show
up in the Nexar app
Before sticking your camera to the windshield, make sure it
has a clear view of the road. We recommend placing it behind
and to the right of the rearview mirror
After choosing a location, clean any dust and dirt from that portion of
the windshield
Remove the holder’s sticker and fix the camera to your windshield
Andere Handbücher für HaloCam
1
Inhaltsverzeichnis
Andere Nexar Dashcam Handbücher
