Nexigo GripCon Bedienungsanleitung
NexiGo GripCon
US
1Contact Information:
Thank you for choosing the NexiGo GripCon!
You are now part of an exclusive club: the NexiGo
family! It's our job to make sure you enjoy your
membership. If you have any problems please
assistance. This product is covered by our industry
leading 1-year manufacturers warranty. Make sure
to register your purchase at nexigo.com/warranty
within 14 days of the delivery date to extend your
warranty coverage to TWO Years!
From all of us here at NexiGo, we want to welcome
you again to the family. We thank you deeply for
your trust and for your business. We know you'll love
it here. We look forward to serving you again in the
near future.
Yours Sincerely,
The NexiGo Team
Website: www.nexigo.com
Manufacturer: Nexight INC
Email: [email protected]
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR 97005, US
2Product Introduction:
This NexiGo GripCon is an enhanced controller for
Switch / Switch OLED gaming consoles. With four
additional back mapping buttons that can help you
get to the next level. Made from a tough ABS material
the NexiGo 1125 Controller is durable and designed
to last. It features many additional functions, such as
Welcome to the NexiGo Family!
US / 01
3
6
10
11
12 15
16
13
32
5
48
Product Overview:
the ability to take screenshots, a six-axis gyroscope,
dual-motor vibration and upgradeable firmware.
This controller supports the original Switch / Switch
OLED power adapter or a standard 15V PD protocol
power adapter for charging.
14
1
9
7
US / 02
4Package Includes:
1 x Controller for Switch / Switch OLED
1 x User Manual
2 x Sliders for Switch Console
5Specifications:
Input Voltage / Current: DC 15V / 1.5A
Working Current: ≦60mA
Working Temperature: -20~40℃
Storage Temperature: -40~70℃
1.+ Button
2.- Button
3.Left Joystick / L3 Button
4.D-pad
5.Screenshot Button / LED Indicator
6.Type-C Charging Power Port
7.HOME Button
8.Right Joystick / R3 Button
9.X / Y / A / B Buttons
10.Reset Cavity
11.Mapping Buttons M1 / M2
12.ZR Button
13.R Button
14.L Button
15.ZL Button
16.Mapping Buttons M3 / M4
Please scan the QR code to watch the controller user guide.
US / 03
6How to Pair NexiGo Controller to Switch /
Switch OLED?
1.Please enable the Pro Controller Wired
Communication setting in the Switch / Switch
OLED console itself. You can do this by going to
System Settings > Controller and Sensors >
Pro Controller Wired Communication. Set Pro
Controller Wired Communication to On.
US / 01
1 2
2.Plug the Switch / Switch OLED console into the
controller.
3.After you have plugged the console into the
controller, press the A Button on the controller to
connect to the console.
4.Finally, please calibrate the Joysticks before first
use.
For Switch Console
Switch Console
For Switch OLED Console
Switch OLED Console
Sliders for
Switch Console
US / 02
7How to calibrate the Joysticks?
Note: These instructions must be performed on the
Switch / Switch OLED console.
1.Press the HOME Button to return to the console
home page and select System Settings.
2.Select the heading Controllers and Sensors and
then select Calibrate Control Sticks.
Note: Do not touch the joysticks or other keys when
installing and plugging in the console. This prevents
automatic calibration. If the joysticks are deviating
during use, please unplug the console from the
controller and reinsert it, or go to the Settings
menu on the console and attempt Joystick
Calibration again.
US / 03
3.Follow the instructions as shown below to
calibrate the joysticks.
US / 04
2. The rear buttons that you can map to are: M1 /
M2 / M3 / M4.
8Mapping the Rear Buttons - Introduction:
4.Follow the onscreen prompts to redo the calibra-
tion process if the joystick is not working as
expected. Otherwise, your joystick will now be fully
calibrated.
1.Many of the buttons on this controller can be
mapped to the rear buttons. The mappable buttons
are: A / B / X / Y / R / L / ZL / ZR / + / - / D-pad / R3 /
L3.
ZR
R
ZL
L
R3
L3
D-
pad
US / 05
9How to Map the Back Buttons?
1.Press and hold the + Button and one of the Map-
ping Buttons(M1 / M2 / M3 / M4) you wish to map
at the same time to enter mapping mode. The LED
Indicator will flash slowly to indicate that you are in
mapping mode.
3. Mapping a front button to the rear buttons
allows you to duplicate the function of the front
button on the rear button.
+
2.Press one of the Mappable Buttons you wish to
map, the LED Indicator will fast flash to indicate that
button input is successful.
ZR
R
ZL
L
R3
L3
D-
pad
US / 06
Inhaltsverzeichnis
Sprachen:
Andere Nexigo Controller Handbücher
