NEXT pool STERILOR Cu/Ag Verdrahtungsschema

AUTOMATIC Cu/Ag IONISATION WATER TREATMENT SYSTEM

Installation

Instructions

User Guide

Please read carefully and keep available for later use

Version 11/2013

SR-12-164-1

STÉRILOR Cu/Ag

FOREWORD

Dear Sir/Madam,

You have chosen a STERILOR Cu/Ag, an automatic water treatment system using copper/silver

ionisation.

We would like to thank you for the confidence that you have placed in us.

Please keep this user guide in a safe place.

It will long be your guide for optimised installation

and operation of all of the equipment for your new device.

Read it carefully before use in order to fully benefit from all of its functions.

By using STERILOR Cu/Ag with a pH that is well regulated around 7.2, your pool's water will be

perfectly disinfected.

You can adjust the pH manually or automatically,

by installing a STERILOR pH.

USEFUL ADDRESS

Your local retailer (stamp):

CONTENTS

1. GENERAL RECOMMENDATIONS............................................................................................................6

2. PRESENTATION..........................................................................................................................................7

2.1 General description ........................................................................................................................7

2.1.1 Operation of the Cu/Ag part ........................................................................................................7

2.1.2 Supply ...........................................................................................................................................7

2.1.3 Front side of the box ....................................................................................................................8

2.1.4 Lateral sides of the box ................................................................................................................8

3. INSTALLATION ...........................................................................................................................................9

3.1 Control box ..........................................................................................................................................9

3.1.1 Location-attachments ..................................................................................................................9

3.1.2 Fitting ...........................................................................................................................................9

3.1.3 Electric connections ...................................................................................................................10

3.2 Ionisation cell ....................................................................................................................................11

3.3 Cu/Ag electrodes...............................................................................................................................11

4. USE...........................................................................................................................................................12

4.1 Memo ................................................................................................................................................12

4.1.1 pH ...............................................................................................................................................12

4.1.2 Copper ........................................................................................................................................12

4.1.3 Chlorine ......................................................................................................................................12

4.2 Device operating display ...................................................................................................................13

4.2.1 Displaying and Setting the time .................................................................................................13

4.2.2 Displaying the device operating time ........................................................................................13

4.3 Production setting .............................................................................................................................13

4.3.1 Displaying and adjusting the production ..................................................................................13

4.3.2 Ionisation current adjustment procedure .................................................................................13

4.3.3 Adjustment procedure following analysis .................................................................................14

4.4 Automatic Operation or Forced Operation.......................................................................................14

4.4.1 Display – Operating Forced operation .......................................................................................14

4.4.2 Forced Operation activation and deactivation procedure ........................................................14

4.5 Change in polarity .............................................................................................................................14

4.5.1 Displaying the change in polarity ...............................................................................................14

4.5.2 Operating the change in polarity ...............................................................................................15

4.6.2 Displaying the diagnoses............................................................................................................15

5. WINTERING..............................................................................................................................................15

6. EARTHING SLEEVE ...................................................................................................................................16

7. MAINTENANCE INSTRUCTIONS ...............................................................................................................17

7.1 General Maintenance........................................................................................................................17

7.2 Copper – Silver electrode maintenance............................................................................................17

8. STORAGE – TRANSPORT ..........................................................................................................................17

9. TECHNICAL CHARACTERISTICS ................................................................................................................17

10. GUARANTEES.........................................................................................................................................18

GUARANTEE CARD – STERILOR Cu/Ag ........................................................................................................19

1. GENERAL RECOMMENDATIONS

For correct operation of the device:

Read this instruction manual carefully and completely before using your STERILOR Cu/Ag. Do

not open the device, only a skilled technician is authorised to do so.

Check the safety of the device: Make sure that the voltage supplied by your mains power

supply complies with the characteristics repeated in Paragraph 9.

The STERILOR Cu/Ag device must operate at the same time as the filtration system, because

it is essential for the water to flow through the Cu/Ag ionisation cell.

Definition of the synoptics used in these instructions:

Important information

Sensitive point, recommendation to be followed to avoid any equipment

deterioration or operating problem

Electrical risks, any operations relating to connections or tests may only be carried

out by authorised persons.

Earthing mandatory

2. PRESENTATION

2.1 General description

The STERILOR Cu/Ag treats the

water in your pool by maintaining a

concentration of copper and silver by

means of ionisation.

2.1.1 Operation of the Cu/Ag part

The automatic STERILOR Cu/Ag

system operates

based on the

principle of ionisation using a Cu/Ag

alloy electrode.

Thanks to its microprocessor, the

STERILOR Cu/Ag controls the

transmission of a low voltage electric

current towards an ionisation cell

placed between the pump and the

filter.

This cell contains several electrodes

made of a perfect Cu/Ag alloy in

accordance with STERILOR

specifications

The ionisation process releases copper

ions (Cu++) and silver ions (Ag+) into

the water. In water, these ions

combine directly to form molecules

with algaecide, flocculant and

disinfectant properties.

The advantages of STERILOR Cu/Ag:

•Automatic water treatment

•Sterilised and sterilising water

•A change of polarity in the production

current which helps to regulate electrode

wear.

•Backlit digital display of the production

current, device operating times and

countdown of the change of polarity time.

2.1.2 Supply

This device is supplied with all equipment

necessary for its installation and use. This

kit includes:

A control box with a pre-wired power

supply cable.

An ionisation cell with its Cu/Ag

electrode and cable equipped with quick

connectors.

+ A Cu/pH colorimetric analysis kit

+ Installation and user instructions

+ Guarantee form

Filtration

Box

GENERAL PRESENTATION OF THE INSTALLATION OF A SWIMMING POOL

TECHN

ICAL ROOM

Liquid

injection

Swimming

pool backflow

Towards

drains

Cu/Ag

ionisation

vessel

Earth towards

separate

earthing rod

Filter

2.1.3 Front side of the box

Function keys:

A Automatic operation setting (see p14)

F Forced operation setting (see p 14)

P Production setting (see 13)

P Time setting (see 12)

Lights and display:

Ionisation current display from 600 to 999

Ionisation current display from 300 to 595

Ionisation current display from 25 to

295mA

Device operating time display

Time display

Polarity and polarity countdown display

Forced operation indicator

Automatic operation indicator

Diagnoses display

2.1.4 Lateral sides of the box

Left side Right side

Cu/Ag electrode

connection General power supply fuse holder 1

"ON/OFF" switch

3. INSTALLATION

The installation of STERILOR Cu/Ag on a swimming pool treated beforehand with PHMB

(polyhexamethylene biguanide) requires the pool to be completely emptied and the filter to be

rinsed thoroughly. It is also advisable to replace the sand.

3.1 Control box

Dimensions:

Width 250 x Height 340 x Depth 150 mm

3.1.1 Location-attachments

3.1.2 Fitting

The electronic box must be installed in

the technical room protected from

sunlight, bad weather and close to the

ionisation cell (2.5 m cable).

The controls of the box (switch,

electrode connection and fuse holder)

must remain accessible.

Necessary equipment:

Drill and 6 mm bit suitable for the

support, plugs

Fix the box securely against a wall via

the 4 fixing holes, using the screws

and plugs supplied =.plastic expansion

plugs (to be adapted to the support if

necessary).

Phillips screwdriver.

Filtration

Box

GENERAL PRESENTATION OF THE INSTALLATION OF A SWIMMING POOL

TECHNICAL ROOM

Liquid

injection

Swimming

pool

backflow

Towards

drains

Cu/Ag

ionisation

vessel

Earth towards

separate

earthing rod

Filter

Cu/Ag

ionisation

vessel

3.1.3 Electric connections

The system operates in parallel with

the filtration pump.

It is essential for it to operate at the

same time as the filtration system. A

box continuously connected to a

separate socket will annul the

guarantee.

Before carrying out any

electrical work on the box, this

connection to the filtration pump

requires the STERILOR Cu/Ag power

supply to be cut off at the filtration

box.

The connection is therefore

made on the filtration pump

contactors in the existing filtration

box, according to the following

diagram:

Single-phase filtration box:

Three-phase filtration box:

Cloc

EARTH

Auto Op.

Forced Op.

PHASE

ContactorCircuit

PUMP

NEUTRAL

380 V THREE-PHASE

Cloc

PHASE

PUMP

NEUTRAL

SINGLE

Auto Op.

Forced Op.

EARTH

Circuit breaker Contactor

Inhaltsverzeichnis

Andere NEXT pool Wassersystem Handbücher

NEXT pool

NEXT pool STERILOR Duo Bedienungsanleitung

Beliebte Wassersystem Handbücher anderer Marken

Spirotech

Spirotech SPIROVENT SUPERIOR S250 Bedienungsanleitung

Culligan

Culligan Aqua-Cleer Aqua-Cleer Advanced Drinking Water... Bedienungsanleitung

A.O. Smith

A.O. Smith Dura-Max AJH - 1000A - P Bedienungsanleitung

Microline

Microline T.F.C.-4 Handbuch

Eureka Forbes

Eureka Forbes Aquaguard Select Bedienungsanleitung

Cetetherm

Cetetherm AquaEfficiency Bedienungsanleitung

CB Tech

CB Tech CB-VOC Bedienungsanleitung

Vaillant

Vaillant auroFLOW plus VPM 15 D Bedienungsanleitung

resideo

resideo Braukmann HS10S Bedienungsanleitung

Gude

Gude INOX 100/24 Bedienungsanleitung

Mono

Mono Eco 1-60 Handbuch

SpectraPure

SpectraPure Drinking Water Kit Bedienungsanleitung

HydroCare

HydroCare Dual Action Bedienungsanleitung

Alpha

Alpha SolarSmart 150 Benutzerhandbuch

TA FRISTAR3 Bedienungsanleitung

GÜDE

GÜDE HWA 800 K Bedienungsanleitung

Rainfresh

Rainfresh UCS2 Bedienungsanleitung

Hilti

Hilti DD-WMS 100 Bedienungsanleitung