Nexvoo DoubleView Pro Bedienungsanleitung

Nexvoo DoubleView Pro

All-In-One Video Bar

User Manual

（Model: N120W）

Packing List

1. DoubleView Pro N120W

2. Remote Control

3. 12/2A Power Adapter

4. 5m USB-C to USB-A Cable

5. 1.5m USB-C to USB-A Cable

6. 1.8m HDMI Cable

7. 1.5m Ethernet Cable

8. Mounting Bracket and Accessories

9. Warranty Card

10. User Manual

Note: We recommend that you use the accessories provided or approved by Nexvoo, using uncertified

accessories may cause uncertain problems.

Remote controlDoubleView Pro N120W 12V/2A

Power Adpter

Mounting Bracket

and Accessories

5m USB-C to

USB-A Cable

1.5m USB-C to

USB-A Cable

1.8m HDMI Cable 1.5m Ethernet Cable

User ManualWarranty Card

Nexvoo DoubleView Pro

All-In-One Video Bar

User Manual

（Model: N120W）

Product Introduction

Mic Arrays

Telephoto Camera

4K Ultra-Wide Camera

Speaker

Camera LED

Power Connector(12V/2A)

3.5mm Audio Output

5 13

14 10 6

12 8

11 7

1 42 3

HDMI Output 2

HDMI Output 1

USB-A Input 2

USB-A Input 1

RJ45 Ethernet Port

USB-C Output

Reset Port

10 9

1. The remote control shall be equipped with two AAA batteries.

2. You can press and hold "VOL-" and "ZOOM-" for 3 seconds at the same time, while the indicator light

flashes. DoubleView Pro N120W will be connected to the remote control automatically. Once connected,

the indicator light of the remote control will be off and the display interface will prompt "Remote Control

Connected".

Always on

LED Color LED Status Function Description

Camera is off.

The microphone is muted.

The device is being restored to factory Settings.

The device is updating the firmware.

Blink slowly

Blink quickly

Always on Camera is on.

Camera Indicator

Remote Control

Return

Mouse

VOL +/-

ZOOM +/-

Home

VOL- and ZOOM -

Press the button to confirm the selection or open the APP in Video mode.

Press the up, down, left or right direction button to move the cursor in Video

mode.

Press the direction button to pan and tilt camera when the AI function is turned

off in USB mode.

Press the button to open or close the AI function (Auto frame and Speaker

Tracking).

Press the button, return to the previous interface or exit App.

Press the button to open the mouse function (Default is closed), the red indicator

of the remote control remains on.

Increase/decrease speaker volume.

Press ZOOM + / - button to zoom in/out when the AI function is turned off.

Press the button to return to home interface.

Press and hold "VOL-" and "ZOOM-" for 3 seconds at the same time, while the

indicator light flashes, the remote control is in pairing mode.

Press the button to switch wide angle lens or telephoto lens in USB mode.

Direction

Press any button, the indicator light is on.

When the remote control is in pairing mode, the indicator light flashes quickly.

Press the button to close the screen display, press the button again to open the

screen display.

Press the button to turn off the microphone, press the button again to turn on the

microphone.

Open the mouse function, the indicator light remains on.

NO. Button Name Function Description

Press the button to delete the text in the input box.

Press the button to switch the remote control to control Video mode or USB

mode.

Indicator

Sleep

Mute

Delete

Switch control

TV TV

Mount the DoubleView Pro N120W below the

TV when the mounting height of the lower

side of the TV is higher than 3.937ft(120cm).

Mount the DoubleView Pro N120W above the

TV when the mounting height of the upper

side of the TV is lower than 3.937ft(120cm).

TV TV

H>3.937ft(120cm)

H<3.937ft(120cm)

0.328ft(10cm)

DoubleView Pro N120W

Installation Instructions

DoubleView Pro N120W

Adjust the device angle after switching to the telephoto camera.

DoubleView Pro N120W doesn’t have a power button. When you plug in the power cord, the device

turns on.

• Connecting DoubleView Pro and displayer through HDMI 1 Output port.

• Connecting DoubleView Pro to power adapter, the device turns on.

• Network can be connected through Ethernet cable or WIFI.

• Open video conference platform (for example Microsoft Teams, Zoom, ...), successfully

connected to the meeting achieved and turned on the camera when green light remains on.

• Short press Sleep button of remote control to turn off screen display when meeting is over.

• Disconnect the power and turn off DoubleView Pro, if necessary.

Powering On and Off

1. Connecting to the displayer

Connection and Usage

Notes: The default display connected to HDMI1 or HDMI2 output port is the same, whether different

displays can be output depends on the video conferencing platform used.

HDMI Output

Join the meeting quickly through DoubleView Pro's Web Server:

• Connect DoubleView Pro and your computer to the same LAN network.

• Start the browser on your computer, enter the IP address of DoubleView Pro and open the Web Server

(such as http://192.168.1.100).

• Enter the meeting link on the Web Server page and click "Send" (for example, enter the Zoom meeting

link).

• After DoubleView Pro receives the Zoom meeting link, it automatically opens the meeting link through the

browser, selects and clicks "Launch App" via the remote control on the browser page, DoubleView Pro

launches the Zoom App and automatically joins the Zoom meeting.

http://192.168.1.100

https://teams.microsoft.com/l/meetup-join/19:meeting_ZWRlZjJiNGEtZjM2NC00YTQzLWFlYTgtMzJj

Please enter the meeting link to quickly open the meeting

Send

Launch Meeting-Zoom

https://zoom.us/meetup-join/19:meeting_ZWRlZjJiNGEtZjM2NC00YTQzLWFlYTgtMzJj

Once you install Zoom Client, click Launch Meeting below

By clocking “Launch Meeting”, you agree to our Teams of Service and Privacy Statement

Launch Meeting

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nexvoo Konferenzsystem Handbücher

Nexvoo

Nexvoo OneView N110 Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung