NexxTech 3-Station FM Wireless Intercom System Bedienungsanleitung

4308995 OWNER’S MANUAL — Please read before using this equipment.

3-Station FM Wireless Intercom System

Your Nexxtech 3-Station FM Wireless

Intercom System is convenient and easy to

use. Installation is quick and simple. Simply

plug each of the three supplied stations into

a standard three-wire AC outlet, and you are

ready to send and receive calls or monitor an

area where a station is installed. Each of

your intercom’s stations has the following

features:

Precision PLL (Phase-Locked Loop)

Circuit — provides clear and reliable

communications.

Built-In Frequency Modulation Circuit —

reduces line noise and interference from

appliances.

Adjustable Volume Control — allows you

to alter the volume to suit the noise level in

the room.

Lockable Talk Bar — allows you to talk to or

monitor a room hands-free.

Call Tone — alerts other stations before you

start talking.

Talk Indicator — illuminates when you

transmit to another station by pressing

CALL, TALK, or LOCK.

Desk or Wall Mounting Capabilities —

provide easy, convenient placement of

stations.

Your intercom system is cUL listed to CSA

standards and meets all applicable Industry

Canada standards.

Caution: This product is equipped with a

three-wire grounding-type plug (a plug

having a third grounding pin). This plug will

only fit into a grounding-type power outlet.

This is a safety feature. If you are unable to

insert the plug into your AC outlet, contact

your electrician to replace your outlet. Do not

defeat the safety purpose of the grounding-

type plug.

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of

uninsulated dangerous voltage

within the product’s enclosure that

might be of sufficient magnitude

to constitute a risk of electric

shock. Do not open the product’s

case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature

accompanying this product.

INSTALLATION

You can install the stations almost anywhere

there is a standard AC outlet. Simply plug

each station into an outlet and place it directly

on a desk, shelf, table or on a wall.

Important: Stations can transmit up to 90

metres (300 feet) and between buildings as

long as they are connected to the same power

line transformer.

Note: Make sure you install the stations at

least 3 metres (10 feet) away from each other.

Placing the stations too close together

produces feedback and creates a squealing

sound.

Mounting

To mount a station on the wall, you need two

screws (not supplied) with heads that fit into

the keyhole slots on the bottom of the

stations.

1. Select a location for the station. Mark the

mounting screw locations on the wall

70mm (23/4inches) apart, one above the

other.

2. Drill holes at the marked locations.

3. Thread a screw into each hole allowing

the screw heads to extend about 3.5mm

(1/8inch) from the wall.

4. Align the keyhole slots on the bottom of

the station with the screw heads in the

wall. Slide the station down onto the

screws to secure it.

OPERATION

Setting the Channel

Each station has three channels, so you can

select which station or stations you want to

communicate with. You can also use a station

to monitor sounds near another station.

For example, you could set a station installed

in the kitchen to Channel A, a station installed

in the family room to Channel B, and a station

installed in a bedroom to Channel C. Write the

names on the Station Directory.

A B C

Kitchen Family room Bedroom

Using the station installed in the kitchen, you

can communicate with the station in the family

room by setting the channel selector to B, or

with the station in the bedroom by setting the

channel selector to C. Or, if you set all

stations to Channel A, you can communicate

with the other two stations from any station.

Set the channel selector on each station as

follows:

• If you want all the stations to

communicate with each other at the same

time, set all stations to the same channel.

• If you want to use a station to

communicate with only one of the other

stations, set only those stations to the

same channel.

Turning a Station On and Off/

Adjusting the Volume

Rotate VOLUME clockwise until it clicks.

POWER indicator lights. Then adjust VOLUME

to a comfortable listening level. To turn off the

station, rotate VOLUME counterclockwise until

it clicks. POWER indicator turns off.

Calling Another Station

1. Be sure the stations you plan to use are

turned on and adjusted to the desired

volume.

2. Set the channel selector to the channel

(A, B or C) for the station(s) you are

calling.

3. Press CALL. Each station that is on and

set to the selected channel sounds a

tone.

4. Hold down TALK and speak in a normal

voice. When you finish speaking,

release TALK and listen for the

response.

Notes:

• Only one party can talk on a channel at

a time.

• The TALK indicator on the station you

are using remains lit as long as you

hold down TALK or CALL, or when you

press LOCK.

• If your voice sounds distorted, you

might be speaking too loudly or too

close to the microphone.

• Set the channel selector back to your

designated channel after you finish

talking, so others can easily reach you.

Monitoring

You can set any station so it continuously

transmits sounds from the area where it is

located to another station. For example, you

could set the station in a baby’s bedroom,

then use the station in the kitchen to monitor

the sounds.

Note: You can monitor only one station at a

time.

1. Press LOCK on the station in the area you

want to monitor. The TALK indicator

lights.

Note: The TALK indicator stays lit until

you press CALL or TALK. This lets you

know that the station is transmitting.

2. Set the channel selectors on both

stations to the same channel.

3. When you finish monitoring, release the

lock by pressing TALK or CALL on the

station in the area you are monitoring.

The TALK indicator turns off.

Note: After pressing LOCK on a station,

you cannot call or talk to that station until

you press TALK or CALL to release the

lock.

Using Additional Stations

You can add additional stations to your

intercom system as long as they transmit on

the same frequency. Any intercom that

transmits on the same frequencies is

compatible. The intercom’s channels and

transmitting frequencies are shown below:

A ....................................... 200 kHz ±2.5 kHz

B ....................................... 270 kHz ±2.5 kHz

C ....................................... 230 kHz ±2.5 kHz

Stations in the same box have the same

frequency.

Be sure the frequency of the stations you plan

to add matches the frequency of your current

stations. If you want to set up a separate

intercom system, however, be sure it operates

on a different frequency.

INDUSTRY CANADA NOTICE

This equipment complies with the limits of a

Class B digital device as specified in Industry

Canada regulations. These limits provide

reasonable protection against radio and TV

interference in residential areas. However,

this device might cause radio or TV

interference even when it is operating

properly.

Operation is subject to the following two

conditions: (1) This device may not cause

interference, and (2) this device must accept

any interference including interference that

may cause undesired operation of the device.

To eliminate the interference, you can try one

or more of the following:

• Reorient or relocate the receiving

antenna.

• Move your device away from the receiver.

• Connect your device to an outlet that is

on a different electrical circuit from the

receiver.

Contact your local electronic store for help

if the problem persists.

This digital apparatus does not exceed the

Class B limits for radio noise emissions from

digital apparatus.

10A03

4308995 Printed in China

CARE

Keep the station dry; if it gets wet, wipe it dry

immediately. Use and store the station only in

normal temperature environments. Handle the

station carefully; do not drop it. Keep the

station away from dust and dirt, and wipe it

with a damp cloth occasionally to keep it

looking new.

Modifying or tampering with the unit’s internal

components can cause a malfunction and

invalidate its warranty. If your unit is not

performing as it should, take it to your local

electronic store for assistance.

LIMITED WARRANTY

Who is Providing This Warranty?

• Orbyx Electronics, LLC (“Orbyx), as the distributor of this

Nexxtech product (your “Product”).

What Does This Warranty Cover?

• This warranty covers defects in materials or

workmanship in your Product under normal use and

conditions.

What is the Period of Coverage?

• This warranty covers your Product for 12 months from

the original purchase date.

Who Is Covered?

• This warranty covers the original consumer purchaser.

Coverage terminates if you sell or otherwise transfer

your Product.

What Will We Do To Correct Problems?

• We will repair your Product or replace your Product with

a new or reconditioned equivalent product, at our option.

How Do You Get Service?

• Call Orbyx TOLL FREE at 1-866-363-3059 for

instructions for obtaining warranty service from Orbyx’s

authorized service providers.

• Or, return your Product directly to the retail store from

which you purchased the Product.

• When you obtain service for your Product, you must

provide a purchase receipt (or other proof of the original

purchase date) and a description of the defect(s).

What Does This Warranty Not Cover?

• This warranty DOES NOT COVER:

• damage due to misuse, abuse, alteration, unauthorized

repair, or accident (such as improper electrical current);

• damage due to “acts of God” (such as lightning) or other

contingencies beyond our control;

• cosmetic damage;

• externally generated static, signal reception or antenna

problems not caused by your Product; or batteries.

• This warranty also DOES NOT COVER, and in no case

will we be liable for, any incidental damages (such as

transportation costs to and from an authorized service

provider, or loss of time) or consequential damages

(such as costs of repairing or replacing other property

which is damaged, including tapes, discs, speakers not

included with your Product or other accessories, or

external electrical systems) resulting from the use of

your Product. Some states do not allow the exclusion or

limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you.

• Defacing the serial number, or using your Product for

commercial or institutional purposes, voids this warranty.

Are There Other Warranties?

• There are no express warranties other than those

expressed herein. Neither the sales personnel nor any

other person is authorized to make any other warranties

or to extend the duration of any warranties.

• ANY IMPLIED WARRANTIES, INCLUDING ANY

IMPLIED WARRANTY OF MERCHANTABILITY (AN

UNWRITTEN WARRANTY THAT A PRODUCT IS FIT

FOR ORDINARY USE), ARE LIMITED TO 90 DAYS.

Some states do not allow limitations on how long an

implied warranty lasts, so the above limitation may not

apply to you.

How Does State Law Apply?

• This warranty gives you specific legal rights, and you

may also have other rights which vary from state to

state.

ORBYX ELECTRONICS WARRANTY

ORBYX Electronics warrants that this product will be free

from defects in materials and workmanship for a period of

one (1) year from the date of purchase. Within this period,

simply take the product and your proof of purchase to any

ORBYX Electronics store or dealer and the product will be

repaired without charge for parts and labour. ORBYX

Electronics reserves the right to charge for transportation.

Any product which has been subject to misuse or

accidental damage is excluded from this warranty.

This warranty is only applicable to a product purchased

through ORBYX Electronics' company owned stores and

dealers and to a product that is presented for repair in a

country where ORBYX Electronics offers the product for

sale. While this warranty does not confer any legal rights

other than those set out above, you may have additional

statutory rights which will vary under the laws of the

various countries, states, province and other governmental

entities in which ORBYX Electronics operates. This

warranty is subject to all statutory rights you may have in

the country of purchase.

LIMITED WARRANTY

Distributed exclusively in the U.S. by

Orbyx Electronics, LLC

501 South Cheryl Lane,

Walnut, CA 91789

Imported in Canada for/Importé au Canada pour

Orbyx Electronics,

Concord, Canada, L4K 4M3

Manufactured in China

For parts, service, and general inquiries please call 1-866-363-3059

Limited Warranty/Garantie Limiteé

U.S.A & Canada

Inhaltsverzeichnis

Andere NexxTech Gegensprechanlage Handbücher

NexxTech

NexxTech 4908422 Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung