NGS electonics ROLLER FUN Bedienungsanleitung
roller fun
USER’S MANUAL
www.ngs.eu
English iFrançais iEspañol i Deutsch iItaliano i Português iPolski i
ΕΛΛΗΝΙΚΑ
roller fun
bluetooth stereo speaker
ENGLISH
3
1
5 6 7 8 9 10
2 43
OVERVIEW
1 Volume + / FWD
2 Volume - / REW
3 button
4 Play / Pause button
5 Charging LED
6 Connected LED
7 Micro SD card slot
8 3.5 mm audio jack socket
9 On/Off
10 Connection point for
charging via micro USB
USER’S MANUAL
4
BLUETOOTH SPEAKER PAIRING
RECONNECTING
1. Move the switch to the ON position, a message
sound; “beep” will announce from speaker and the
mode LED will blinking in blue; the device is turned
ON and goes into searching / paring / reconnect
mode for pair.
2. Now, turn ON the Bluetooth function on your
mobile phone.
3. Search for “NGS ROLLER FUN” and select it to
pair (for first time pairing or pairing a new mobile
device).
4. The Bluetooth speaker will be reconnecting
automatically if your mobile phone has been
paired (Depend on the of mobile phone’s type and
configuration, manual reconnection may require on
some devices).
CHARGING THE BLUETOOTH
SPEAKER
1. Connect the Bluetooth speaker’s micro USB socket
with the computer’s USB port through USB cable.
2. The charging LED will turn ON in red light; the
rechargeable battery is in charging.
3. The charging LED red light will turn OFF when the
rechargeable battery is fully charged.
4. Disconnect the USB cable.
ENGLISH
5
BLUETOOTH SPEAKER
CONTROL FUNCTION
1. In playing music, press button to pause music,
press it once again to play.
2. Press and hold the button to increases the
volume level.
3. Press and hold the button to decreases the
volume level.
4. Press the button to play next music file.
5. Press the button to play previous music file.
MODES
BLUETOOTH / LINE IN / FM RADIO /
MICRO SD CARD
To switch between modes, hold down th button for
2 seconds. If no cable or SD card is connected to the
device, it will ignore these modes.
5. If pairing is successful, a message sound; “beep”
will announce from speaker and the mode LED light
will keep turn on.
USER’S MANUAL
6
LINE IN MODE
1. Connect the audio source to the speaker via a
3.5 mm audio jack cable.
2. Play music from external audio source.
Note: Not all functions are available in LINE IN mode.
Only the play/pause and volume functions are
available.
MICRO SD CARD MODE
1. Insert the micro SD card into the slot.
2. The device will automatically play any music in MP3
format on the card.
HAND FREE FUNCTION
BLUETOOTH MODE ONLY
When there is an incoming call;
1. The ringing sound will up and the playing music will
pause automatically.
2. Press button to pick up the call if you want.
3. Now you have hand free function with the
Bluetooth speaker.
4. Hold down the button for 2 seconds to hand up
the call when finished. And,
5. The paused music will start to play automatically.
ENGLISH
7
If at any time in the future you should
need to dispose of this product please
note that:
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
(Waste Electrical and Electronic
Equipment Directive)
Battery warranty: The battery is a consumer product,
and as such it is under warranty for 12 months.
HEREBY, LURBE GRUP S.A,
DECLARES THAT THIS SPEAKER
IS IN COMPLIANCE WITH THE
ESSENTIAL REQUIREMENTS AND
OTHER RELEVANT PROVISIONS OF
DIRECTIVE 1999/5/EC.
FM MODE
1. Hold down the button for 2 seconds. It will cycle
between modes until you hear the message “FM
TUNER”.
2. Press the button for automatic channel search.
Once the search is finished, skip between channels
by pressing the and buttons.
roller fun
Haut-parleur bluetooth stéréo
FRANÇAIS
9
APERÇU GENERAL
1 Volume + / FWD
2 Volume - / REW
3 Bouton
4 Bouton
lecture/pause
5 LED de charge
6 LED de connexion
7 Entrée carte micro SD
8 Entrée audio Jack 3.5 mm
9 Allumé/éteint
10 Connexion charge micro
USB
1
5 6 7 8 9 10
2 43
MANUEL DE L’UTILISATEUR
10
COUPLAGE RECONNEXION DU
HAUTPARLEUR BLUETOOTH
1. Mettez l’interrupteur sur ON, un message est
diffusé par le haut-parleur et le voyant LED bleu du
mode clignote; le dispositif s’allume et passe au
mode de recherche / couplage / reconnexion pour
réaliser le couplage.
2. Activer maintenant la fonction Bluetooth sur votre
téléphone mobile.
3. Rechercher le “NGS ROLLER FUN” et le
sélectionner pour effectuer le couplage (pour le
premier couplage ou pour le couplage d’un nouveau
dispositif mobile).
4. Le haut-parleur Bluetooth rétablira
automatiquement la connexion à votre téléphone
mobile si celui-ci a été couplé précédemment (cela
dépend du type et de la configuration du téléphone
mobile, certains dispositifs peuvent requérir la
reconnexion manuelle).
CHARGEMENT DU HAUT
PARLEUR BLUETOOTH
1. Raccorder la prise micro USB du haut-parleur
Bluetooth au port USB à l’aide du câble USB.
2. Le voyant LED rouge de charge s’allume; la batterie
rechargeable est en cours de chargement.
3. Le voyant LED rouge de charge s’éteint; la batterie
rechargeable est complètement chargée.
4. Débrancher le câble USB.
Inhaltsverzeichnis
Sprachen:
Andere NGS electonics Sprecher Handbücher
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung