Nibe F730 Bedienungsanleitung
User manual
LEK
NIBE F730
Exhaust air heat pump
UHB EN 1803-2
431748
Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on page
11.
How to scroll through menus and make different settings is described
on page 16.
Set the indoor climate
2X
INDOOR CLIMATE
HEAT PUMP INFO
HOT WATER
The mode for setting the indoor temperature is accessed by pressing
the OK button twice, when in the start mode in the main menu. Read
more about the settings on page 30.
Increase hot water volume
2X
1X
To temporarily increase the amount of hot water, first turn the control
knob to mark menu 2 (water droplet) and then press the OK button
twice. Read more about the settings on page 47.
In event of disturbances in comfort
If a disturbance in comfort of any type occurs there are some measures
that can be taken before you need to contact your installer. See page
72 for instructions.
Table of Contents
41 Important information
4Installation data
5Safety information
6Serial number
7F730 – An excellent choice
82 The heat pump – the heart of the house
9Heat pump function
11Contact with F730
21Maintenance of F730
303 F730 – at your service
30Set the indoor climate
47Set the hot water capacity
52Get information
56Adjust the heat pump
714 Disturbances in comfort
71Info-menu
71Manage alarm
72Troubleshooting
755 Technical data
766 Glossary
80Item register
83Contact information
3NIBE F730Table of Contents |
1 Important information
Installation data
F730Product
Serial number
Installation date
Installer
Accessories
✔
Extra shunt ECS
40/41
Room unit RMU 40
Communications
module SMS 40
SetFact.
sett.
NameNo.
0temperature(curve offset)1.1
9heating curve (curve
slope)
1.9.1
20min. flow line temp.1.9.3
75%fan sp. exhaust air (nor-
mal)
5.1.5
MaxInstalled electrical output
Serial number must always be given
Certification that the installation is carried out according to instructions
in the accompanying installer manual and applicable regulations.
_________________________Signed__________________Date
NIBE F730Chapter 1 | Important information4
Safety information
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
Rights to make any design or technical modifications
are reserved.
©NIBE 2017.
NOTE
F730 must be installed via an isolator switch with a
minimum breaking gap of 3 mm.
NOTE
If the supply cable is damaged, only NIBE, its service
representative or similar authorised person may replace
it to prevent any danger and damage.
NOTE
Do not start the heat pump, if there is a risk that the
water in the system has frozen.
5NIBE F730Chapter 1 | Important information
Symbols
NOTE
This symbol indicates danger to person or machine .
Caution
This symbol indicates important information about what you should
observe when maintaining your installation.
TIP
This symbol indicates tips on how to facilitate using the product.
Serial number
The serial number can be found at the bottom right of the front cover and
in the info menu (menu 3.1).
Serial number
Caution
You need the product's (14 digit) serial number for servicing and support.
NIBE F730Chapter 1 | Important information6
F730 – An excellent choice
F730 is part of a new generation of heat pumps, which have been intro-
duced to supply your home with inexpensive and environmentally friendly
heating. Heat production is safeand economical with integrated hot water
heater, immersion heater, circulation pump and control system.
The heat pump can be connected to an optional low temperature heat
distribution system. e.g. radiators, convectors or underfloor heating. It is
also prepared for connection to several different accessories, for example
climate systems with different temperatures.
F730 is equipped with acontrol computer for good comfort, good economy
and safe operation. Clear information about status, operation time and
all temperatures in the heat pump are shown on the large and easy to
read display. This means, for example, that external unit thermometers
are not necessary.
Excellent properties for F730:
■Inverter controlled compressor
The heat pump has an inverter controlled compressor that automatically
adapts itself optimally and economically to your house and supplies your
installation with renewable energy.
■Integrated water heater
There is a water heater integrated in the heat pump, which is insulated
with environmentally friendly cellular plastic for minimal heat loss.
■Scheduling the indoor comfort and hot water
Heating and hot water as well as ventilation, can be scheduled for each
day of the week or for longer periods (vacation).
■Display with user instructions
The heat pump has a large display with easy-to-understand menus that
facilitate setting a comfortable climate.
■Simple troubleshooting
In the event of a fault, the heat pump display shows what happened
and the actions to be taken.
7NIBE F730Chapter 1 | Important information
2 The heat pump – the heart of
the house
A
DF
B
C
E
H
G
80 °C
22 °C 0 °C
5 °C 0 °C
55 °C 45 °C
Värmebärare
Köldmedium
Rumsluft
Heating medium
Ventilation air
Refrigerant
Evaporator
Condenser
Compressor
1
2
3
Expansion valve
NIBE F730Chapter 2 | The heat pump – the heart of the house8
Heat pump function
An exhaust air heat pump makes use of the heat in the building's ventila-
tion air to heat up the accommodation. The conversion of the ventilation
air's energy to accommodation heating is done in three different circuits.
From the outgoing ventilation air (1), free heating energy is retrieved from
the accommodation and transported to the heat pump. The heat pump
increases the retrieved heat's low temperature to a high temperature in
the refrigerant circuit, (2). The heat is distributed around the building in
the heating medium circuit (3).
Ventilation air
The hot air is transferred from the rooms to the heat pump via the house
ventilation system.
A
The fan then routes the air to the heat pump’s evaporator. Here, the air
releases the heating energy and the air's temperature drops significantly.
The cold air is then blown out of the house.
B
Refrigerant circuit
A liquid, a refrigerant, circulates in a closed system in the heat pump which
also passes the evaporator. The refrigerant has a very low boiling point. In
the evaporator the refrigerant receives the heat energy from the ventilation
air and starts to boil.
C
The gas that is produced during boiling is routed into an electrically
powered compressor. When the gas is compressed, the pressure increases
and the gas's temperature increases considerably, from -5°C to approx.
100 °C.
D
From the compressor, the gas is forced into a heat exchanger, condenser,
where it releases heat energy to the heat pump’s heating section,
whereupon the gas is cooled and condenses to liquid form again.
E
As the pressure is still high, the refrigerant can pass an expansion valve,
where the pressure drops so that the refrigerant returns to its original
temperature. The refrigerant has now completed a full cycle. It is routed
to the evaporator again and the process is repeated.
F
Heat medium circuit
The heat energy that the refrigerant produces in the condenser is retrieved
by the climate system's water, heating medium, which is heated to 55 °C
(supply temperature).
G
The heating medium circulates in aclosed system and transports the heated
water's heat energy to the heat pump's integrated hot water heater and
the radiators/heating coils of the house.
H
The temperatures are only examples and may vary between different installations and
time of year.
9NIBE F730Chapter 2 | The heat pump – the heart of the house
The heat pump’s integrated water heater is in the heating section. The
heating medium heats the hot water.
I
The temperatures are only examples and may vary between different installations and
time of year.
NIBE F730Chapter 2 | The heat pump – the heart of the house10
Andere Handbücher für F730
5
Inhaltsverzeichnis
Andere Nibe Wärmepumpe Handbücher
Nibe
Nibe F2025 Bedienungsanleitung
Nibe
Nibe S2125 Benutzerhandbuch
Nibe
Nibe F1145 series Bedienungsanleitung
Nibe
Nibe F370 Benutzerhandbuch
Nibe
Nibe F1145 series Benutzerhandbuch
Nibe
Nibe S735 Originalbetriebsanleitung
Nibe
Nibe F370 Bedienungsanleitung
Nibe
Nibe NIBE F1X26 Original Betriebsanleitung
Nibe
Nibe S2125 Bedienungsanleitung
Nibe
Nibe F2120 Series Bedienungsanleitung
Nibe
Nibe ClimateMaster Tranquility TCW Series Leitfaden
Nibe
Nibe F1255 Series Bedienungsanleitung
Nibe
Nibe F1155 Series Benutzerhandbuch
Nibe
Nibe VVM 310 Benutzerhandbuch
Nibe
Nibe F2040 Series Bedienungsanleitung
Nibe
Nibe FIGHTER 2010 Series Bedienungsanleitung
Nibe
Nibe F1155 Series Bedienungsanleitung
Nibe
Nibe F750 Betriebsanleitung
Nibe
Nibe AMS 10-8 Benutzerhandbuch
Nibe
Nibe FIGHTER 1250 Bedienungs- und Wartungsanleitung
Beliebte Wärmepumpe Handbücher anderer Marken
Mitsubishi Electric
Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung
Dimplex
Dimplex LI 16I-TUR Benutzerhandbuch
Carrier
Carrier WSHP Open v3 Kurzanleitung zur Einrichtung
TGM
TGM CTV14CN018A Bedienungsanleitung
Carrier
Carrier 38MGQ Series Bedienungsanleitung
Kokido
Kokido K2O K880BX/EU Fehlerbehebungshandbuch
