NIEDO TL1002F-S20 Benutzerhandbuch

FINISH:

BEAVERTON, OR 97005

NIEDO GROUP, INC.

-02

SHEET

DO NOT SCALE DRAWING

REV

DWG. NO.

SCALE:

SIZE

PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

PROJECTION

ANGLE

THIRD

UNLESS OTHERWISE SPECIFIED

TOLERANCES

MATERIAL:

DIMENSIONS ARE IN MILLIMETERS 5465 SW WESTERN AVE.

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

SET UP INSTRUCTIONS

A A

B B

C C

D D

- PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

20 Ft. Timberline Modular Display

TL1002F-S20

SET-UP MANUAL

20 Ft. Timberline Modular Display

SETUP TIME PER 10FT. SECTION IS 2-3 HOURS WITH 2 PERSONS.

NOTE: UNLESS OTHERWISE SPECIFIED

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

A A

B B

C C

D D

MATERIAL:

DIMENSIONS ARE IN MILLIMETERS

FINISH:

BEAVERTON, OR 97005

NIEDO GROUP, INC. 5465 SW WESTERN AVE.

-01

SHEET

DO NOT SCALE DRAWING

REV

DWG. NO.

TOLERANCES

UNLESS OTHERWISE SPECIFIED

SCALE:

SIZE

PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

PROJECTION

ANGLE

THIRD - PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

20 Ft. Timberline Modular Display

SET UP INSTRUCTIONS

HEADER

WAVE TOP

20 FT. TIMBERLINE MODULAR DISPLAY

TL1002F-S20

AND CENTER DYE-SUB FABRIC PANEL

(1) CASE WILL CONTAIN CENTER SUPPORT BARS, MONITOR BRACKET

(2) MOLDED PLASTIC WHEELED CASES

TABLE

SUPPORT POST

GRAPHIC

LAMP

FEET

SHELF

OPTIONAL

MONITOR

MOUNT

NIEDO GROUP, INC. 5465 SW WESTERN AVE.

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

A A

B B

C C

D D

TOLERANCES

MATERIAL:

DIMENSIONS ARE IN MILLIMETERS

FINISH:

BEAVERTON, OR 97005

-01

SHEET

DO NOT SCALE DRAWING

REV

UNLESS OTHERWISE SPECIFIED

THIRD

DWG. NO.

SCALE:

SIZE

PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

PROJECTION

ANGLE

- PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

20 Ft. Timberline Modular Display

SET UP INSTRUCTIONS

20 FT. TIMBERLINE MODULAR DISPLAY

TL1002F-S20

SET UP ASSEMBLY DIAGRAM

ITEM

NO. DESCRIPTION QTY.

1 TIMBERLINE POST 4

2 TIMBERLINE FOOT 4

3 TOP SUPPORT POST 4

4 TIMBERLINE TOP 2

5 GRAPHIC HEADER 2

6 TIMBERLINE OVERHEAD LAMP 4

7 15.75" HORIZONTAL Z-4400 END 2

8 8.75" HORIZONTAL Z-4400 END 2

9 35.625" HORIZONTAL Z-4400 CENTER 2

10 40" HORIZONTAL Z-4400 WITH INSERT 4

11 40" HORIZONTAL Z4400 WITHOUT INSERT 4

12 GRAPHIC HEADER MOUNTING BRACKET 4

13 TIMBERLINE ACCESSORY TABLE 1

14 TIMBERLINE MOUNTED SHELF ASSEMBLY 3

15 TIMBERLINE FOOT ATTACHMENT SCREWS 16

16 OPTIONAL MONITOR MOUNT 1

17 OPTIONAL MONITOR MOUNTING

35.625" HORIZONTAL Z-4400 2

STEP 6

ATTACH HEADER INTO

PREVIOUSLY INSTALLED

HEADER BRACKETS. SIMPLY

SLIDE IN AND FINGER

TIGHTEN THUMB SCREWS.

(GRAPHIC HEADER ATTACHMENT)

PROVIDED, REPEAT WITH ALL

STEP 1

INSTALL TIMBERLINE FEET

WITH 4 SCREWS (ITEM #15)

AND ALLEN WRENCH

REMAINING FEET, ITEMS #2

STUDS INTO THE FRONT POST

STEP 2

REMOVE SCREW FROM LOWER POST

INSERT, SLIDE UPPER POST OVER

LOWER POST, INSERT SCREW AND

TIGHTEN. REPEAT WITH ALL POSTS.

BE CERTAIN THAT HARDWARE IS

INSERTED AND VISIBLE FROM BACKSIDE

OF FRAME ONLY, AS SHOWN ABOVE.

AT THIS POINT, IF INSTALLING

OPTIONAL ACCESSORY TABLES,

SLIDE THE TABLE CLAMP MOUNTING

CHANNEL AS SHOWN.

REMOVE SCREW FROM THE 40 INCH

BACKSIDE OF FRAME ONLY, AS SHOWN ABOVE

THAT HARDWARE IS INSERTED AND VISIBLE FROM

REMAINING 40 INCH HORIZONTAL BARS. BE CERTAIN

WITH ALLEN WRENCH PROVIDED. REPEAT FOR

(ITEM #11), REPLACE SCREW AND TIGHTEN

SLIDE INTO 2ND FRAME HORIZONTAL BAR

FRAME HORIZONTAL BAR W/INSERT (ITEM #10

STEP 3

UPPER GROOVE OF TOP

STEP 4

SLIDE GRAPHIC HEADER

BRACKET (ITEM #12) INTO

FRAME HORIZONTAL BAR.

TIGHTEN

INTERLOCK ADJUSTMENT IS INSIDE AND AWAY FROM THE

STEP 5

REFER TO ASSEMBLY DIAGRAM AND BILL OF MATERIALS, PAGE 3

ASSEMBLE FRAME HORIZONTAL BARS, ITEMS #10 &11 (ASSEMBLY

STEP 3), OPTIONAL MONITOR MOUNTING HORIZONTAL BARS

ITEMS #17 AND END BARS ITEMS #7 & 8 TO MAIN POSTS.

ASSEMBLE BARS TO POSTS BY INSERTING THE END OF THE

LOCKING MECHANISM FULLY INTO POST CHANNEL THEN

TURNING THE SOCKET HEAD ADJUSTMENT CLOCKWISE TO

LOCK THE HORIZONTAL BAR IN PLACE. THIS PROCESS IS USED

FOR ASSEMBLING TOP AND BOTTOM BARS ON FRAME.

DISASSEMBLE BY TURNING THE ADJUSTMENT COUNTER

CLOCKWISE TO DISENGAGE. BE CERTAIN THAT THE

FRONT OF THE DISPLAY TO AVOID BEING VISIBLE.

20 FT. TIMBERLINE MODULAR DISPLAY

TL1002F-S20

20 Ft. Timberline Modular Display

A A

B B

C C

D D

SHEET

NIEDO GROUP, INC.

SET UP INSTRUCTIONS

FINISH:

DIMENSIONS ARE IN MILLIMETERS

MATERIAL:

TOLERANCES

UNLESS OTHERWISE SPECIFIED

THIRD

ANGLE

PROJECTION PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

SIZE

SCALE:

DWG. NO. REV

DO NOT SCALE DRAWING

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

-01

- PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

5465 SW WESTERN AVE.

BEAVERTON, OR 97005

STEP 5

STEP 3

STEP 4 & 6

STEP 2

STEP 1

STEP 3

STEP 5

HORIZONTAL SUPPORT BAR THEN CONNECT THE

SLIDE GRAPHICS INTO TOP CHANNEL OF BOTTOM

SUPPORT BAR TO POSTS AT BOTH ENDS AS PER STEP 5 INTO THE VERTICAL CHANNELS OF THE MAIN POST ON

WHEN TOP AND BOTTOM HORIZONTAL SUPPORT BARS

ARE ATTACHED, THE GRAPHIC SIDES MAY BE TUCKED

BOTH SIDES

HORIZONTAL SUPPORT BAR THEN CONNECT THE

SLIDE GRAPHICS INTO BOTTOM CHANNEL OF TOP

SUPPORT BAR TO POSTS AT BOTH ENDS AS PER STEP 5

5465 SW WESTERN AVE.

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

A A

B B

C C

D D

FINISH:

BEAVERTON, OR 97005

NIEDO GROUP, INC.

SHEETDO NOT SCALE DRAWING

REV

DWG. NO.

SCALE:

SIZE

DIMENSIONS ARE IN MILLIMETERS

MATERIAL:

TITLE

PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

PROJECTION

ANGLE

THIRD

UNLESS OTHERWISE SPECIFIED

TOLERANCES

- PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

20 Ft. Timberline Modular Display

SET UP INSTRUCTIONS

STEP 7

(GRAPHIC ATTACHMENT) THIS INSTRUCTION IS RELEVANT TO FRAME, END PANELS AND HORIZONTAL BARS.

20 FT. TIMBERLINE MODULAR DISPLAY

TL1002F-S20

THIS SCREW ONLY

FINGER TIGHTEN

THIS SCREW ONLY

FINGER TIGHTEN

THIS SCREW ONLY

FINGER TIGHTEN

THIS SCREW ONLY

OF DESIGNATED TIMBERLINE POSTS (ITEM #1)

TO ASSEMBLY DIAGRAM

TOP FABRIC NOT SHOWN FOR CLARITY

WAVE TOP ASSEMBLY AND ATTACHMENT

( TOP ASSEMBLY AND ATTACHMENT )

FRAME/SKIN ASSEMBLY MAY NOW BE INSERTED INTO THE TOP

STEP 8

COMPONENTS OF THE WAVE TOP FRAME ARE LABELED FOR EASY

ASSEMBLY. WHEN THE WAVE TOP FRAME IS ASSEMBLED

SLIDE THE FABRIC COVER OVER LIKE A PILLOW CASE AND ZIP UP.

WHEN THE COVER IS ON THE FRAME, INSERT THE MOUNTING

SCREWS THROUGH THE HOLES PROVIDED AND THREAD INTO THE

WAVE TOP SUPPORT POST (ITEM#3) IN THE BOTTOM SIDE, BE

SURE TO FINGER TIGHTEN ONLY. WAVE TOP SUPPORT POST AND

FOR ITEM #s PLEASE REFER

ARCH TOP ASSEMBLY AND ATTACHMENT

20 FT. TIMBERLINE MODULAR DISPLAY

TL1002F-S20

5465 SW WESTERN AVE.

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

A A

B B

C C

D D

FINISH:

BEAVERTON, OR 97005

NIEDO GROUP, INC.

SHEETDO NOT SCALE DRAWING

REV

DWG. NO.

SCALE:

SIZE

DIMENSIONS ARE IN MILLIMETERS

MATERIAL:

TITLE

PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

PROJECTION

ANGLE

THIRD

UNLESS OTHERWISE SPECIFIED

TOLERANCES

- PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

20 Ft. Timberline Modular Display

SET UP INSTRUCTIONS

REVERSE TO UNLOCK

DETAIL A

TURN TO LOCK

INTERLOCK MECHANISM

METAL FUSION

AS SHOWN IN DETAIL A

(ITEM #10)

MOUNTING BRACKET

ROUNDED END PANEL

AND INTERLOCK MECHANISM

TL1002F-S

TAPERED SIDES ASSEMBLY DETAIL

20 FT. TIMBERLINE MODULAR DISPLAY

STRAIGHT SIDES ASSEMBLY DETAIL

TIMBERLINE POST

2X 15.75" Z-4400 EXTRUSIONS

TIMBERLINE STRAIGHT END

POSITIONED AS SHOWN. SLIDE THE

PANELS ARE ATTACHED WITH

TIMBERLINE POST

STEP 7ATTACHED AS IN

ATTACHED AS IN

2X 15.75" Z-4400

END PIECES

END PANEL GRAPHIC

AT BOTTOM. BOTH EXTRUSIONS

ARE FASTENED TO POST USING

THE INTERLOCK MECHANISM

SHOWN IN DETAIL A

15.75" Z-4400 EXTRUSION

STEP 7

TIMBERLINE POST

1X 15.75" Z-4400 EXTRUSION

AT THE TOP AND 1X 8.75" Z-4400

8.75" Z-4400 EXTRUSION

THE THUMB SCREWS.

BRACKETS AND FINGER TIGHTEN

METAL FUSION PANEL INTO THE

TIMBERLINE TAPERED END

PANELS ARE ATTACHED WITH

END PANEL GRAPHIC

METAL FUSION END PANELS

BRACKETS SLIDE INTO THE CHANNEL

ON THE TIMBERLINE POST AND ARE

TIMBERLINE METAL FUSION

ROUNDED AND TAPERED END

PANELS ARE ATTACHED WITH

GRAPHICS HEADER MOUNTING

BRACKETS AS IN STEPS 4 & 6.

GRAPHIC HEADER

METAL FUSION

TAPERED END PANEL

5465 SW WESTERN AVE.

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

A A

B B

C C

D D

FINISH:

BEAVERTON, OR 97005

NIEDO GROUP, INC.

SHEETDO NOT SCALE DRAWING

REV

DWG. NO.

SCALE:

SIZE

DIMENSIONS ARE IN MILLIMETERS

MATERIAL:

TITLE

PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

PROJECTION

ANGLE

THIRD

UNLESS OTHERWISE SPECIFIED

TOLERANCES

- PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

20 Ft. Timberline Modular Display

SET UP INSTRUCTIONS

REVERSE TO UNLOCK

DETAIL A

TURN TO LOCK

INTERLOCK MECHANISM

5465 SW WESTERN AVE.

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

A A

B B

C C

D D

DIMENSIONS ARE IN MILLIMETERS

FINISH:

BEAVERTON, OR 97005

NIEDO GROUP, INC.

SHEETDO NOT SCALE DRAWING

REV

DWG. NO.

SCALE:

MATERIAL:

TOLERANCES

SIZE

TITLE

PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

PROJECTION

ANGLE

THIRD

UNLESS OTHERWISE SPECIFIED

- PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

20 Ft. Timberline Modular Display

SET UP INSTRUCTIONS

THE SLAT WALL WING ASSEMBLY

IS ATTACHED TO THE SIDES OF

TIMBERLINE POST

ATTACHED TO THE FRONT OF

THE TIMBERLINE POST USING A

THE SLAT WALL WOOD ASSEMBLY IS

TIMBERLINE

KNURLED KNOB AND WASHER.

INTERNALLY THREADED COSMETIC

POST

TL1002F-S20

A FRAMEWORK OF Z4400

EXTRUSION AND INTERLOCK

SLAT WALL WINGS ASSEMBLY DETAIL

SLIDING THREADED INSERT AS

SLAT WALL WOOD ASSEMBLY DETAIL

20 FT. TIMBERLINE MODULAR DISPLAY

THREADED INSERT

KNURLED KNOB

THE TIMBERLINE POST USING

SHOWN, AND FASTENED USING AN

WASHER

MECHANISM, AS SHOWN.

Z-4400

EXTRUSION

INSERTION INTO VERTICAL POSTS.

(ALL HARDWARE IS PROVIDED)

ASSEMBLE TABLE LEGS TOGETHER

WITH THE TOP AND BOTTOM BASE

PLATES AND SCREWS. THEN

ATTACH THE ACRYLIC TABLE TOP

WITH THE LARGE BOLTS AND WING

NUTS TO TOP OF BASE PLATE ON

LEGS. ATTACH CLAMP TO BACK

OF ACRYLIC TABLE TOP FOR

ACCESSORY TABLE

OVERHEAD LAMPS

SLIDE THE BASE ADAPTER INTO THE BOTTOM OF

THE LAMP. THEN SLIDE THE LAMP INTO THE TOP

GROOVE OF THE HORIZONTAL SUPPORT.

HOOK IS FACING

TOWARDS REAR

DETAIL -A-

5465 SW WESTERN AVE.

NOT TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN

A A

B B

C C

D D

DIMENSIONS ARE IN MILLIMETERS

FINISH:

TL-1003-T30F-CL-TV

BEAVERTON, OR 97005

NIEDO GROUP, INC.

SHEETDO NOT SCALE DRAWING

REV

DWG. NO.

MATERIAL:

TOLERANCES

SCALE:

SIZE

TITLE

PART TO ANYONE WITHOUT PERMISSION OF NIEDO GROUP, INC.

PROJECTION

ANGLE

THIRD

UNLESS OTHERWISE SPECIFIED

- PROPRIETARY -

THIS DOCUMENT AND DATA DISCLOSED HERIN OR HEREWITH IS

20 Ft. Timberline Modular Display

SET UP INSTRUCTIONS

20 FT. TIMBERLINE MODULAR DISPLAY

TL1002F-S20

MONITOR MOUNTING BRACKET

TIMBERLINE ACCESSORY OPTIONS

TIMBERLINE MOUNTED SHELVES

ATTACH BRACKETS INTO

VERTICAL POSTS AND TIGHTEN.

PLACE ACRYLIC SHELVES ON TOP

OF BRACKET AND SECURE USING

LARGE BOLTS AND WING NUTS.

FOLLOW THE STEPS AT LEFT TO ATTACH THE

MONITOR MOUNTING BRACKETS TO YOUR

MONITOR (NOT PROVIDED). ONCE THE BRACKETS

ARE ATTACHED AND SECURE YOU ARE READY TO

ATTACH YOUR MONITOR TO THE MONITOR

MOUNTING HORIZONTAL SUPPORTS AS IN STEP 5.

Inhaltsverzeichnis

Andere NIEDO Monitor Handbücher

NIEDO

NIEDO TL-MONITOR Series Benutzerhandbuch

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung