Nikon D200 Bedienungsanleitung

Upgrading the Firmware for the D200

Upgrading the Firmware for the

D200

Windows 

Thank you for choosing a Nikon product. This guide describes how to

upgrade the camera firmware for the D200.

If you are not confident that you can perform the update

successfully, the update can be performed by a Nikon-authorized

service representative.

The D200 has two sets of firmware, A and B, which must be updated separately. After

updating the A firmware, repeat steps 4–5, below, to upgrade the B firmware.

Important

The camera may be damaged if power is interrupted or camera controls are operated during the

update. Do not turn the camera off, remove or disconnect the power source, or operate camera

controls during the update. If the update is not completed successfully and the camera becomes

inoperable, take the camera to a Nikon-authorized service representative for inspection.

Get ready

To upgrade the camera firmware, you will need:

The camera

A UC-E4 USB cable or a memory card reader (do not use JumpShot cables provided

with Lexar Media cards)

One of the following power sources:

An EH-6 AC adapter

A fully-charged EN-EL3e rechargeable Li-ion battery

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (1 of 9) [6/18/2010 4:02:15 PM]

Upgrading the Firmware for the D200

A Nikon-approved memory card that has been formatted in the camera (note that

all data on the memory card will be deleted when the card is formatted; before

formatting the card, back up any data you wish to keep to a computer or other

device). Do not use Microdrive cards.

The camera

Guide to Digital

Photography

Check the current camera firmware version

Turn the camera on.

Press the MENU button and select

Firmware Version in the setup menu.

*Illustration shows dialog displayed when

both A and B firmware have been updated

to version 2.00 or later.

Two firmware versions (A and B) will be

displayed. Both should be earlier than 2.00.

Turn the camera off.

Download and extract the new firmware

Right-click an empty area of the desktop and select New > Folder from the menu

that appears. Name the folder as desired.

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (2 of 9) [6/18/2010 4:02:15 PM]

Upgrading the Firmware for the D200

Right-click the I agree - Begin download link on the download site and select

Save Target As. Save the file to the folder created in Step 3-1.

Open the folder created in Step 3-1 and

double-click F-D200-V201W.exe.

The following files will be extracted to a “D200Update”folder in the new folder:

A2000201.bin Camera A firmware

B2000201.bin Camera B firmware

D200Updatefolder

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (3 of 9) [6/18/2010 4:02:15 PM]

Upgrading the Firmware for the D200

Copy the firmware to the memory card

The firmware can be copied to the camera memory card either by connecting the

computer directly to the camera using the USB cable, or by removing the memory card

from the camera and inserting it in a card reader.

Important

Only one of the two sets of firmware (A or B) can be updated at a time. Use separate

memory cards for each set of firmware, or update firmware A as described below, then

format the memory card and repeat the process for firmware B.

Direct USB Connection

Note: Use the EH-6 AC adapter or a fully-charged EN-EL3e rechargeable Li-ion battery.

Turn the camera off and insert a formatted memory card. For information on

formatting memory cards, see the camera

Guide to

Digital Photography

Press the MENU button, select the setup

menu, and set the USB option to Mass

Storage.

Turn the camera off and connect the USB cable as shown below.

UC-E4 USB cable

Turn the camera on.

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (4 of 9) [6/18/2010 4:02:15 PM]

Upgrading the Firmware for the D200

If Nikon Transfer is installed, it will start automatically; to exit, select Exit from

the File menu.

If PictureProject is installed, it will start automatically; click Cancel to exit.

Windows Vista

Under Windows Vista, an AutoPlay dialog

may be displayed. Click .

Windows XP

Under Windows XP, a Removable Disk

dialog may be displayed. Click Cancel.

The camera will appear in “Computer”(Windows Vista) or “My

Computer”(Windows XP) as a removable disk. Copy “A2000201.bin”(A

firmware) or “B2000201.bin”(B firmware) from the “D200Update”folder to this

removable disk.

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (5 of 9) [6/18/2010 4:02:15 PM]

Upgrading the Firmware for the D200

Drive letters may differ Illustration shows A firmware

When copying is complete, double-click the removable disk and confirm that

the file has been copied successfully.

Disconnect the camera from the computer.

For more information, see the

Guide to

Digital Photography

Important

Be sure to copy the firmware to the root directory of the memory card. The camera will

not recognize the new firmware if it is placed in a folder under the root directory.

Card Reader

Connect the card reader to the computer and insert a formatted memory card.

If Nikon Transfer is installed, it will start automatically; to exit, select Exit from

the File menu.

If PictureProject is installed, it will start automatically; click Cancel to exit.

Windows Vista

Under Windows Vista, an AutoPlay dialog

may be displayed. Click .

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (6 of 9) [6/18/2010 4:02:15 PM]

Upgrading the Firmware for the D200

Windows XP

Under Windows XP, a Removable Disk

dialog may be displayed. Click Cancel.

The memory card will appear in “Computer”(Windows Vista) or “My

Computer”(Windows XP) as a removable disk. Copy the firmware to the

removable disk as described in Step5 of “Direct USB Connection.”

Right click the removable disk and select Eject from the menu that appears.

Remove the memory card from the card reader.

Important

Be sure to copy the firmware to the root directory of the memory card. The camera will

not recognize the new firmware if it is placed in a folder under the root directory.

Update the camera firmware

During the update, do not:

Remove the memory card

Turn the camera off

Operate any of the camera controls

Attach or remove lenses

Unplug or disconnect the AC adapter

Remove the battery

Subject the camera to powerful electromagnetic noise

Any of the above actions could cause the camera to become inoperable.

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (7 of 9) [6/18/2010 4:02:15 PM]

Upgrading the Firmware for the D200

Insert the memory card containing the firmware into the camera.

Turn the camera on.

Press the MENU button and select

Firmware Version in the setup

menu.

*Illustration shows dialog displayed

when both A and B firmware have

been updated to version 2.00 or

later.

The current firmware version will be

displayed. Press the multi selector to

the right.

A firmware update dialog will be displayed. Highlight Yes and press

the ENTER button to begin the update.

*Illustration shows dialog displayed

when A firmware is updated. Follow

the same steps to update B

firmware.

About five minutes are required to

complete the update. Do not perform

any operations while the message

shown at right is displayed.

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (8 of 9) [6/18/2010 4:02:15 PM]

Upgrading the Firmware for the D200

The message shown at right will be

displayed when the update is

complete.

Confirm that the update was completed successfully.

8-1.Turn the camera off and remove the memory card.

8-2.Check the camera firmware version as described in Step2,

“Check the current camera firmware version.”

8-3.If the version displayed is 2.01,

the update was successful.

*Illustration shows dialog

displayed when updates for

both A firmware and B firmware

are completed.

Format the memory card.

After upgrading A firmware, return to Step 4 and upgrade B

firmware.

If you changed the USB setting from PTP to Mass Storage to

update the camera firmware, return to the USB menu and select PTP.

This completes the firmware update.

file:///K|/d200_firmup_En/En/d200ab_win_en_ABF.html (9 of 9) [6/18/2010 4:02:15 PM]

Andere Handbücher für D200

Inhaltsverzeichnis

Andere Nikon Digitalkamera Handbücher

Nikon

Nikon CoolPix S1100pj Bedienungsanleitung

Nikon

Nikon COOLPIX P7800 Bedienungsanleitung

Nikon

Nikon CoolPix P80 Betriebsanleitung

Nikon

Nikon D7000 Betriebsanleitung

Nikon

Nikon VBA23001 Betriebsanleitung

Nikon

Nikon Coolpix S220 Bedienungsanleitung

Nikon

Nikon COOLPIX 55300 Bedienungsanleitung

Nikon

Nikon D7100 Bedienungsanleitung

Nikon

Nikon Coolpix SQ Bedienungsanleitung

Nikon

Nikon N1530 Bedienungsanleitung

Nikon

Nikon CoolPix S6000 Benutzerhandbuch

Nikon

Nikon F3 Betriebsanleitung

Nikon

Nikon COOLPIX P310 Bedienungsanleitung

Nikon

Nikon Coolpix S3700 Bedienungsanleitung

Nikon

Nikon Coolpix S3000 Bedienungsanleitung

Nikon

Nikon CoolPix S4300 Bedienungsanleitung

Nikon

Nikon COOLPIX 7600 Bedienungsanleitung

Nikon

Nikon D800E Bedienungsanleitung

Nikon

Nikon D7100 Bedienungsanleitung

Nikon

Nikon COOLPIX L330 Bedienungsanleitung

Nikon

Nikon 2100 - Coolpix Digital Camera Bedienungsanleitung

Nikon

Nikon D3100 Bedienungsanleitung

Nikon

Nikon COOLPIX S6500 Bedienungsanleitung

Nikon

Nikon D70 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung

Samsung

Samsung SCC-C4253 Bedienungsanleitung