Nikon PD-10 Bedienungsanleitung

Wireless Printer Adapter

PD-10

Instruction Manual

Printed in Japan

Fuji Bldg., 2-3 Marunouchi 3-chome, TR5I00350101(82)

Chiyoda-ku, Tokyo 100-8331, Japan 6MAK3882--

No reproduction in any form of this manual, in whole or in part (except

for brief quotation in critical articles or reviews), may be made without

written authorization from NIKON CORPORATION.

PD-10 (En, De, Fr, Es, Se, Ru, Nl, It)

For Your Safety

To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety

before using this equipment. Keep these safety instructions where all those who use the product will read them.

The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol:

WARNINGS

This icon marks warnings, information that should be read before using this product to prevent possible injury.

Turn off immediately in the event of malfunction

Should you notice smoke or an unusual smell coming from the

PD-10, unplug the USB connector from printer and remove the

battery immediately, taking care to avoid burns. Then take the

equipment to a Nikon-authorized service representative for in-

spection. Continued operation could result in injury.

Do not disassemble

Touching the internal parts of the product could result in injury.

Repairs should be performed only by qualified technicians.

Should the product break open as the result of a fall or other ac-

cident, take the product to a Nikon-authorized service represen-

tative for inspection after unplugging the product and/or

removing the batteries.

Do not use in the presence of flammable gas

Do not use electronic equipment in the presence of flammable

gas, as this could result in explosion or fire.

Keep dry

Do not immerse in or expose to water. Continuing to use the prod-

uct under such circumstances may cause fire or an electric shock.

Keep out of reach of children

Failure to observe this precaution could result in injury.

Remove the batteries if the product will not be used for

long periods

Failure to observe this precaution could result in leakage, which

may cause fire, injury, or contamination of surroundings.

Follow the instructions of hospital and airline personnel

This device emits radio frequency radiation that could interfere

with medical or navigational equipment. Do not use this device

in a hospital or on board an airplane without first obtaining the

permission of hospital or airline staff.

Follow the warnings on the batteries

Failure to observe this precaution could result in leakage, rupture,

or fire.

Notices

• No part of the manuals included with this product may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into

any language in any form, by any means, without Nikon’s prior written

permission.

• Nikon reserves the right to change the specifications of the hardware

and software described in these manuals at any time and without prior

notice.

• Nikon will not be held liable for any damages resulting from the use of

this product.

• While every effort has been made to ensure that the information in

these manuals is accurate and complete, we would appreciate it were

you to bring any errors or omissions to the attention of the Nikon rep-

resentative in your area (address provided separately).

Notice for customers in the U.S.A.

Federal Communications Commission (FCC)

Declaration of Conformity

This device complies with Part 15 of the FCC rules. Operation of the de-

vice is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interfer-

ence received, including interference that may cause undesired operation.

Products that contain a radio transmitter are labeled with FCC ID and may

also carry the FCC logo.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful in-

terference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful in-

terference, and (2) this device must accept any interference received, in-

cluding interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to oper-

ate this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and op-

erated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter.

Nikon Corporation declares that the Wireless Printer Adapter

PD-10 ( FCC ID: MXF-U940829G) is limited in CH1~CH11 for 2.4 GHz

by specified firmware controlled in U.S.A.

Notice for customers in the State of California

WARNING: Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects or other

reproductive harm. Wash hands after handling.

Nikon Inc.,

1300 Walt Whitman Road, Melville, New York

11747-3064, U.S.A.

Tel.: 631-547-4200

Notice for customers in Canada

CAUTION

This class B digital apparatus meets all requirements of the Canadian In-

terference Causing Equipment Regulations.

RSS-210 14. Exposure of Humans to RF Fields

The installer of this radio equipment must ensure that the antenna is lo-

cated or pointed such that it does not emit RF field in excess of Health

Canada limits for the general population; consult Safety Code 6, obtain-

able from Health Canada’s website:

www.hc-sc.gc.ca/rpb

ATTENTION

Cet appareil numéique de la classe B respecte toutes les exigences du Rè-

glement sur le matériel brouilleur du Canada.

IC statement

Operation is subject to the following two conditions:

1) This device may not cause interference and

2) This device must accept any interference, including interference that

may cause undesired operation of the device.

iii

Notice for customers in Europe

Hereby, Nikon Corporation, declares that this wireless printer adapter is

in compliance with the essential requirements and other relevant provi-

sions of Directive 1999/5/EC.

Symbol for separate collection applicable

in European countries

Caring for the Adapter

Keep dry

The device will be damaged if immersed in water or subjected to

high levels of moisture.

Do not drop

The product may malfunction if subjected to strong shocks or vibration.

Keep away from strong magnetic fields

Do not use or store this device in the vicinity of equipment that gen-

erates strong electromagnetic radiation or magnetic fields. Strong

static charges or the magnetic fields produced by equipment such as

radio transmitters could affect the product’s internal circuitry.

Avoid sudden changes in temperature

Sudden changes in temperature, such as occur when entering or

leaving a heated building on a cold day, can cause condensation in-

side the device. To prevent condensation, place the device in a car-

rying case or a plastic bag before exposing it to sudden changes in

temperature.

This symbol indicates that this product is to be collected

separately.

The following apply only to users in European countries.

• This product is designated for separate collection at an ap-

propriate collection point. Do not dispose of as household

waste.

• For more information, contact the retailer or the local au-

thorities in charge of waste management.

Table of Contents

For Your Safety

Notices ...............................................................................................................................................................i

Caring for the Adapter ..................................................................................................................................... iii

Introduction ..................................................................................................................................................... 1

Before You Begin ............................................................................................................................................. 2

Parts of the Adapter ......................................................................................................................................... 3

Inserting the Batteries....................................................................................................................................... 4

Connecting the PD-10 to a Printer .................................................................................................................... 5

Setting Profile Information on the Camera........................................................................................................ 6

Wireless Printing............................................................................................................................................... 8

LED Lamp Display ............................................................................................................................................. 9

Troubleshooting ............................................................................................................................................. 10

Specifications ................................................................................................................................................. 11

Introduction

Thank you for purchasing the Nikon PD-10 wireless printer adapter.

The PD-10 is an accessory for use with Nikon COOLPIX digital cameras* equipped with Wireless transfer mode.

By connecting the PD-10 to a PictBridge-compatible printer, you can wirelessly print camera images without a computer.

Read this manual and the camera manual thoroughly before use, and keep them handy when using these products.

* Check the camera manual to make sure that the camera is compatible with the PD-10.

Note

• Connect the PD-10 directly to a printer. Do not connect to a USB hub.

• The PD-10 must be connected to a printer that provides a 5 V, 100 mA power supply through the PictBridge interface (USB connector).

LINK

BUSY

Before You Begin

Life-Long Learning

As part of Nikon’s “Life-Long Learning” commitment to ongoing

product support and education, continually-updated information is

available on-line at the following sites:

• For users in the U.S.A.:

http://www.nikonusa.com/

• For users in Europe and Africa:

http://www.europe-nikon.com/support/

• For users in Asia, Oceania and the Middle East:

http://www.nikon-asia.com/

Visit these sites to keep up-to-date with the latest product informa-

tion, tips, answers to frequently-asked questions (FAQs), and gen-

eral advice on digital imaging and photography. Additional

information may be available from the Nikon representative in your

area. See the URL below for contact information:

http://nikonimaging.com/

Package

Contents

PD-10 wireless printer adapter

Instruction Manual (this manual)

Declaration of Conformity (Europe only)

Two LR6 (AA) Alkaline batteries (for testing)

Warranty

Parts of the Adapter

LINK

BUSY

Battery chamber (c4)

Battery-chamber cover (c4)

Reset button (c10)

START button (c5)

POWER lamp

(c5, 9)

LINK lamp

(yellow green/orange)

(c9)

BUSY lamp

(yellow green/orange)

(c7, 9)

USB connector (c5)

Inserting the Batteries

Press down and slide the battery-

chamber cover in the direction of

the arrow and open the cover.

Insert two AA batteries into the

battery chamber matching the (+)

and (–) polarities as shown in the

diagram.

Close the battery-chamber cover

and slide it until it latches.

Inhaltsverzeichnis

Sprachen:

Andere Nikon Druckerzubehör Handbücher

Nikon

Nikon AF-10 Bedienungsanleitung

Beliebte Druckerzubehör Handbücher anderer Marken

Star Micronics

Star Micronics TSP800 Series Bedienungsanleitung

REA

REA JET HR pro 2K Bedienungsanleitung

HP Laserjet,Color Laserjet 4si Bedienungsanleitung

oliser

oliser MS 45 Bedienungsanleitung

Roland

Roland DU2-64 Anleitungen und Rezepte

Xerox

Xerox EFI EXP6000 Bedienungsanleitung

Canon

Canon Finisher-T1 Bedienungsanleitung

Sharp

Sharp FO-1MK Bedienungsanleitung

Labelmate

Labelmate PM-300 Bedienungsanleitung

Epson

Epson T6248 Betriebsanleitung

Epson

Epson OT-BZ20 Bedienungsanleitung

Canon

Canon TonerRobot EP-27 Bedienungsanleitung

Ricoh

Ricoh LCIT RT5100 Kurzanleitung

GBC

GBC 16 Series Bedienungsanleitung

Canon

Canon INNER 2-WAY TRAY-E1 Bedienungs- und Wartungshandbuch

Develop

Develop SD-509 Bedienungsanleitung

Kyocera

Kyocera KM-6230 Handbuch

Triumph Adler

Triumph Adler DF-710 Handbuch