Niles RS6 Granite Original Betriebsanleitung

BLENDING HIGH FIDELITY

AND ARCHITECTURE®

INSTALLATION & OPERATION GUIDE

MODELS

SANDSTONE

RS6

GRANITE

RS6

CORAL

RS6

Weatherproof Rock Loudspeaker

CONGRATULATIONS

Thank you for choosing a Rock Loudspeaker from Niles. With proper installation

and operation, you’ll enjoy years of trouble free use.

Niles’ manufacturers the industry’s most complete line of custom installation

components and accessories for audio/video systems. For a free full line catalog

write to: Niles, Catalog Request, P.O. Box 160818, Miami, Fl 33116-0818 or check

our website at www.nilesaudio.com.

without notice. Niles, the Niles logo and Blending Technology and Architecture are registered trademarks of Niles

Audio Corporation. ConeForward, GeoRealistic and MicroPerf are trademarks of Niles Audio Corporation.

TABLE OF CONTENTS

INTRODUCTION 2

FEATURES & BENEFITS 3

INSTALLATION CONSIDERATIONS 5

INSTALLATION 10

OPERATION 17

SPECIFICATIONS 18

WARRANTY REGISTRATION CARD 21

LIMITED WARRANTY 22

INTRODUCTION

The RS6 series of weatherproof rock loudspeakers are designed to provide

unparalleled listening satisfaction and GeoRealistic™ styling. The extraordinary

sonic performance of the RS6 was achieved by harmonizing Niles' unique and

proprietary technology with advances in cabinet assembly techniques. They are

designed and built to withstand the environmental stresses placed on an outdoor

loudspeaker. They will sound good and look good no matter what Mother Nature

does to them.

The RS6 series Loudspeaker is a two-way loudspeaker in an acoustic suspension

enclosure. The cabinet is styled to look like a rock. It is supplied with a security

bracket and cable to insure it stays where it is placed, reducing the chance of theft

and unauthorized movement of the loudspeaker. For the first time, serious listeners

will be able to enjoy the music in their backyard as much as their living room and

the speakers will blend into the landscaping.

INTRODUCTION

FEATURES & BENEFITS

GeoRealistic™ Styling

Traditionally, rock speakers have looked like ornaments and not like rocks. Each

RS6 style has unique textures and colors that are fashioned after natural rocks.

Shaped grilles match the features on the front of the rock, making them blend into

the cabinet. All of this extra attention to detail leads to a GeoRealistic™ style that

enables the RS6 to blend in with other landscaping and disappear. All that will be

noticed is the great sound not the loudspeaker.

Weather Proof Construction

The cabinet is made from fiberglass, it utilizes double seals on the tweeter, woofer

and enclosure cover, the woofer drains water away from it, the grilles are painted

aluminum and the drivers are made from weather resistant materials. The RS6 has

passed the most stringent environmental tests devised. Surviving over 5 years worth

of temperature cycling and still having seals that pass a 24-hour submersion test. It

has passed the test requirements for Salt Fog, Operating Temperature, Storage

Temperature, UV Exposure and Humidity per military standard 883. Whether you

are considered about salt-air, rain, freezing rain, snow, extreme temperatures, high

humidity, direct sunlight or combinations of these conditions, the RS6 has proven

itself to withstand the harshest conditions Mother Nature can throw at it.

6.5" Injection Molded TCC Woofer

The unusually stiff and light injection molded TCC (talc, carbon, and ceramic) filled

polypropylene cone, the butyl rubber surround, and the substantial magnet and

motor structure are optimized for large excursions of the woofer. In this way, the

6-1/2" woofer can create superior bass output. In the end, the woofer design

provides deep rich bass and outstanding weather resistance capabilities.

1" Teteron Tweeter

In the past, rock speakers have used a co-axial tweeter design that has disappointed

listeners with a fatiguing and harsh treble sound caused by tweeter ringing. The

RS6’s 1" Teteron tweeter utilizes a tri-laminate design consisting of an inner textile

layer which forms the dome, a high damping layer to kill unwanted resonances and

an outside layer of urethane to add stiffness and prevent breakup modes. The result

is a transparent clear, sweet, natural sounding tweeter, which still maintains its

extended frequency response.

Tweeter Placement Improves Coverage and Dispersion

The Tweeter is angled twenty degrees up from the woofer. This means that it is

“aimed” at the listener and not at the ground. This improves the high frequency

coverage of the loudspeaker and ensures that all the benefits of the 1" Teteron

Tweeter are heard and not lost in the surroundings.

FEATURES & BENEFITS

Precision Crossover

A customized electronic dividing network inside the cabinet precisely distributes

the music to the woofer and the tweeter. The three-pole two-way design of the RS6

crossover provides excellent stereo imaging, low distortion and superior sonic

performance.

ConeForward™ Design

Most competitive rock speaker manufacturers mount their drivers from inside the

cabinet. This moves the front of the driver inside the cabinet creating a tunnel for

the driver to play through. This tunnel adversely affects the sound quality of the

loudspeaker by making the loudspeaker sound “narrow” and “far away”. Niles’

engineers have used a patent-pending ConeForward™ design technique that moves

the woofer and tweeter as close to the grille as possible. Combining the

ConeForward™ design technique with tight quality control leads to unparalleled

sonic performance and imaging from an outdoor rock loudspeaker.

Rigid Acoustically Inert Cabinet Construction

Niles’ utilizes a unique 4-layer cabinet construction to achieve superior

non-resonance of the loudspeaker cabinet. This insures that all you hear is the

music not the cabinet ringing.

Low Diffraction Microperf™ Aluminum Grilles

The aluminum Microperf™ grille on the RS6 has hundreds of precisely sized

perforations, creating an acoustically transparent grille. The aluminum construction

resists oxidation enabling years of trouble-free operation in the harshest conditions.

We paint both sides of the grille for added protection.

Connection Cable with Water Resistant Wire Nuts

Connecting the loudspeaker’s cable to the cable running from the house is always a

point of concern for the installer. If this connection is not done right, the cable will

corrode and the connection will fail. To make sure this connection is trouble-free,

we provide a three-foot connection cable rated for burial underground and

specialized waterproof wire nuts. Our wire nuts are filled with a waterproof sealant.

Just insert the wires and twist them together. Then bury the cable. The connection

will be protected from the elements.

Security Bracket and Cable

Using the security bracket and cable supplied with the loudspeaker provides a

simple but effective method to protect the loudspeaker from theft or unapproved

movement. You can easily upgrade our standard security mounting method to

provided even greater security, if you require it.

FEATURES & BENEFITS

INSTALLATION CONSIDERATIONS

Tools and Materials Required

• A wire stripper

• 1/2" PVC conduit (optional)

• PVC conduit glue and cleaner (optional)

• PVC cutting tool

• Trench digger or shovel

• Tube of silicon sealant (optional)

• Cable (length and type determined by installation site – see “Choosing the

Speaker Cable”)

Selecting the number and location for your speakers

The RS6 loudspeaker can be installed directly on the ground, in a flowerbed, on a

wood deck or on a concrete/stone patio. There are two considerations for placing

the loudspeaker, ease of running the cable to the loudspeaker and coverage of the

loudspeaker. The RS6 loudspeaker will cover an area of a circle with a 20-foot

diameter, in front of the speakers.

If you are using stereo outputs from the amplifier, alternate the speakers to provide

the best imaging. You should place speakers less than 10 feet from the sides of the

listening area and 15 feet from each other. The row spacing should not be greater

than 25 feet. These loudspeaker spacing rules are the recommended maximums;

placing speakers at a greater distance apart will negatively affect sound coverage

and reduce their stereo effect. Placing speakers closer together will improve sound

coverage and produce more stereo coverage.

INSTALLATION CONSIDERATIONS

RS8SI

Figure 1 Stereo Coverage 4 speakers

Figure 1 shows how this would work for a square area of 35 feet by 25 feet

and using stereo signals. Using our spacing rules as shown in Table 1,

leads to the need for four loudspeakers. The loudspeaker coverage pattern is

shown in the diagram.

Figure 2 shows the same area as Figure 1, however the number of speakers has

increased by 2. You can see a greater area of stereo coverage and this would also

have a more even sound level across the listening area. This illustrates

the fact that not using the maximum spacing allowed leads to improved

sound quality.

Achieving high quality stereo coverage in a large area is costly. You need to use

more speakers and more amplifier power or separate amplifiers. If a large area needs

to be covered, consider using a summed stereo or mono signal for each speaker. If

summing the stereo inputs into the amplifier or setting the amplifier to play in mono

is acceptable, the loudspeakers can be spaced 10 feet from the sides of the listening

area and 20 feet from each other. The row spacing between speakers should be less

than 35 feet. This will increase the area your loudspeakers will cover.

INSTALLATION CONSIDERATIONS

Table 1 Spacing Rules

RS6

Figure 2 Stereo Coverage 6 speakers

Sources Spacing Spacing Between Spacing

from Sides Speakers within a row Between Rows

Stereo 10 ft 15 ft 25 ft

3.1m 4.6m 7.6m

Mono 10 ft 20 ft 35 ft

3.1m 6.1m 10.7m

Note: These are maximun recomended distances, sound quality is improved if

you use smaller spacings.

Figure 3 shows the difference in coverage area using the spacing rules for mono

signals. Using the same four speakers as we did in Figure 1, we can increase

our coverage area from 875 square feet (81.3 sq. meters) to 1400 square feet

(130.1 sq. meters), simply by using a mono source.

The trade off in sound quality between mono sources and stereo sources is sonic

imaging. If you are concerned with keeping the instruments and vocals sonically

separated, then stereo setup must be used.

When choosing the location for the loudspeaker, take into consideration the slope of

the land in the area the speakers are going to be placed. The flatter and more level

the area, the better. The woofer should be straight up and down or tilted forward a

bit to assist in drawing water away from it. Never chose a place where an automatic

sprinkler will be aimed on or near the loudspeaker. While the loudspeaker is

weatherproof, continuous streaming water will shorten the product’s life.

Choosing the Speaker Cable

In order to choose the proper speaker cable, please follow these steps:

• Unless you are using a Niles’ WVC100 or WMVC100 series weatherproof

impedance matching volume controls or equivalent, only two (2) RS6

loudspeakers can be safely attached to a typical amplifier channel, if that

amplifier is rated to drive 4 ohms. You can do this by running wires from each

loudspeaker to the amplifier or you can connect one loudspeaker to another.

Make sure this is taken into account when calculating cable length and number

of amplifier channels needed. If you are unsure about these calculations, consult

an audio/video installer.

INSTALLATION CONSIDERATIONS

RS6

Figure 3 Mono Coverage 4 speakers

• You will need 2-conductor speaker cable that clearly identifies each conductor in

the cable. If burying your cable in the ground is required, use cable rated for

direct burial or run cable through PVC pipe. Always use moisture resistant cable.

• After calculating the length of cable needed for each speaker, use the furthest

length cable to determine the gauge (thickness) of speaker wire to use:

Wire Gauge Maximum Distance

16 . . . . . . . . . . . .60 ft (18 m)

14 . . . . . . . . . . . .100 ft (30 m)

12 . . . . . . . . . . . .160 ft (50 m)

• When running wires inside walls or outdoors, you should install your wires while

conforming to your local building requirements and codes. If you are unsure of

these codes, consult a professional audio/video installer, building contractor or

local building and inspection agency that has jurisdiction.

Incorporating a Volume Control

It is possible to control the volume of the sound at the speaker location. Volume

controls are connected in line with the speaker, an example of wiring an area with

4 speakers and a master volume control is shown in Figure 4. It is usually desirable

to control the volume of the speakers in different areas or zones of the outdoor

system. A suggested way to accomplish this is shown in Figure 5. Niles makes

a wide range of outdoor volume controls. We recommend our standard

weatherproof volume control, WVC100 series or our weatherproof muting volume

control, WMVC series. In addition to controlling the volume of the loudspeakers,

these controls can allow the addition of added speakers without adding more

amplifier channels.

INSTALLATION CONSIDERATIONS

Figure 4 One Zone Volume Control Wiring

Volume controls provide flexibility and customization to make the system reliable

and easy to use. Consult your local Niles’ dealer for more information about using

volume controls.

Recommended Amplifier Power

We recommend an amplifier with a power rating of ten to one hundred fifty watts

per channel for optimum performance. Outdoor speakers typically require more

power than indoor speakers. The outdoor environment is usually noisier and has

less reflective surfaces to make the system sound louder. Therefore, the use of a

higher power amplifier is recommended.

Ironically, most speakers are not damaged by large amplifiers but by small

amplifiers. When playing the loudspeaker at higher volumes, a small amplifier will

run out of power very quickly. When an amplifier runs out of power it creates

damaging “clipping” distortion. A large amplifier will play at the same volume

without causing this distortion.

If the plan requires connecting two RS6 speakers on one amplifier channel, an

amplifier rated to drive a 4-ohm load of thirty watts to three hundred watts, is

recommended. If you use two RS6’s on one channel and the amplifier is not rated

for driving a 4-ohm load, the amplifier will run out of power more easily and could

damage the speakers.

See the section “Operation” for more information about clipping distortion.

INSTALLATION CONSIDERATIONS

Figure 5 Two Zone Volume Control Wiring

Andere Handbücher für RS6 Granite

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Niles Sprecher Handbücher

Niles

Niles RS 6 SANDSTONE Original Betriebsanleitung

Niles

Niles RS6 Granite Bedienungsanleitung

Niles

Niles DS6.3 Bedienungsanleitung

Niles

Niles MP5 Original Betriebsanleitung

Niles

Niles CM760DSFX Bedienungsanleitung

Niles

Niles PHD60 Bedienungsanleitung

Niles

Niles HDLCRBX Bedienungsanleitung

Niles

Niles Niles CM710SI Bedienungsanleitung

Niles

Niles HD8.3 Bedienungsanleitung

Niles

Niles PHD42 Betriebsanleitung

Niles

Niles CM730DSFX Bedienungsanleitung

Niles

Niles CM5PR Original Betriebsanleitung

Niles

Niles CM4PR Series Bedienungsanleitung

Niles

Niles Directed Soundfield DS6.5 Bedienungsanleitung

Niles

Niles RS6 Sandstone Bedienungsanleitung

Niles

Niles StageFront Home Theater Solutions IW770FX Bedienungsanleitung

Niles

Niles DS8.3 Fehlerbehebungshandbuch

Niles

Niles DS8 Series Bracket Bedienungsanleitung

Niles

Niles CM760DS Bedienungsanleitung

Niles

Niles CM760 Bedienungsanleitung

Niles

Niles DS8300AT Fehlerbehebungshandbuch

Niles

Niles StageFront Home Theater Solutions IW650FX Bedienungsanleitung

Niles

Niles StageFront Pro1870LCR Bedienungsanleitung

Niles

Niles SMS-10 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung