NIMO ETS 1500 Bedienungsanleitung

ETS 1500

ETS 1500 F

427000544

EN Drying Cabinet User Manual

Keep this user ma-

nual in a safe place,

so that it will always

be on hand for fu-

ture reference.

Dear NIMO customer,

Congratulations on making an excellent choice and welcome to the NIMO family.

NIMO is a global family with its roots in Sweden.

NIMO thanks you for your condence and hopes that you will enjoy using your new

drying cabinet.

A good drying cabinet should be well designed, dry clothes well, have a low environmental

impact, be user friendly, save time, have a long life and be reliable. NIMO offers you all

of these features.

When you buy a NIMO product you can be sure that the inside is as good as the outside

and that the ethics and morale that go into building this product are just as high as the

quality and functionality you are getting. That’s what Swedish quality is all about.

Before using the product for the rst time, please read the user instructions and the

advice on caring for the product. This will help you get the best possible results from your

product and all its functions.

If you have any questions, don’t hesitate to call us or contact us via our website.

Best wishes from Sweden and the NIMO team.

Doc. No: 427000544 Rev. 05

We reserve the right to make

alterations.

Manufacturer: NIMO-VERKEN AB Box124

S-548 22 HOVA

Sweden

Ph +46 (0) 506 488 00

Fax +46 (0) 506 488 10

[email protected]

www.nimoverken.com

ARTICLE AND SERIAL NUMBER

See page 17

CONTENTS

ABOUT THIS USER MANUAL

The contents of this user manual describe the

dryer functions and how it should be used.The

manual also includes instructions for installa-

tion and maintenance.

IMPORTANT SAFETY INFORMATION 4

AREA OF USE 4

TECHNICAL SAFETY 5

FOR A GOOD ENVIRONMENT 6

PACKAGING MATERIAL 6

MANAGEMENT OF

ENDOFLIFE DRYING CABINET 6

INSTALLATION 7

UNPACKING 7

FITTING THE DOOR HANDLE 8

REHANGING THE DOOR 8

POSITIONING 9

EXHAUST CONNECTION,

MODEL ETS 1500 10

EXHAUST, MODEL ETS 1500F 12

ELECTRICAL CONNECTIONS 13

USING FOR THE FIRST TIME 14

USING THE DRYING CABINET 15

STARTING 15

POSITIONING THE WASHING 15

USER TIPS 15

AIR FLOW 15

SETTINGS 16

CARE 17

CLEANING 17

SERVICE 17

REPLACEMENT PARTS 17

TROUBLE SHOOTING 18

TECHNICAL DATA 19

IMPORTANT SAFETY INFORMATION

AREA OF USE

CAUTION This equipment is intended only to be used to dry fabrics

washed in water.

pApplicable to installation in the EU

This drying cabinet can be used by children over the age of 8 and

persons (including children) with various disabilities or inadequate

experience and knowledge, provided they are kept under supervi-

sion or are given instructions on how to use the appliance in a safe

way and understand the risks that use entails.

Children must not play with the appliance.

pApplicable to installation in countries outside the EU

The appliance is not intended for use by persons (including children)

with various disabilities or inadequate experience and knowledge.

They may use the appliance only under supervision or if they have

received instructions on how to use the appliance from a person

who is responsible for their safety.

Children must be supervised to ensure that they do not play with

the appliance.

This drying cabinet meets applicable safety requirements. Incorrect use

may, however, lead to injuries and damage to property.

The advice and caution notices in this manual have been written to en-

able you to avoid incorrect use and unnecessary risks of accidents, and

should be read before installing and using the drying cabinet.

TECHNICAL SAFETY

pCheck the drying cabinet for visible signs of damage before install-

ing it. A damaged drying cabinet must not be used as it may pose a

hazard.

pThe drying cabinet must be installed and kept indoors.

pThe drying cabinet may only be connected to an earthed power

socket installed in accordance with applicable safety instructions.The

wall socket must be accessible after installation so that the power

supply to the drying cabinet can be disconnected at any time.

pMake sure that the data on the drying cabinet identication plate

(fuse, voltage and frequency) agrees with that of the mains power

supply at the site of installation.

pDo not connect the drying cabinet to the power supply with an

extension lead as the necessary safety cannot be guaranteed (risk

of overheating).

pIf the power cord is damaged, it must be immediately replaced, and

this must be done only by the manufacturer, the manufacturer's

service agent or similarly qualied persons in order to avoid danger.

IMPORTANT SAFETY INFORMATION

FOR A GOOD ENVIRONMENT

PACKAGING MATERIAL

The packaging that protects the drying cabinet

against damage in transit has been chosen with

concern for the environment in mind and is

therefore recyclable.

Recycled packaging means reduced consump-

tion of raw materials and lower levels of waste.

MANAGEMENT OF END-OF-LIFE

DRYING CABINET

When the drying cabinet has reached the end

of its life, it must be taken to a recycling centre

for disposal. Many parts can be re-used, but the

cabinet also contains other material that must

be handled correctly.You should therefore never

dispose of a drying cabinet or parts of a cabinet

with the domestic refuse as this can lead to health

risks and harm the environment.

Take the end-of-life drying cabinet to a recycling

station instead. Check with your dealer if neces-

sary.

All the plastic parts of the drying cabinet are

marked with internationally standardised sym-

bols. The parts can therefore be recycled in an

environmentally friendly way by waste separation.

__________________________________

Check that the goods have not been damaged in

transit. Any damage should be reported to your

dealer within 7 days.

After unpacking, check that the goods are in good

condition. Damage, faults and any missing parts

should be immediately reported to your carrier.

¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

INSTALLATION

Qty.

1. Draft stabilizer 1

2. Hose 1

3. Spigot 1

4. Screw TRX 5x70 fzk 7

5. Washer NB 5x25 4

6. Plastic plug 7

7. Spacer 8.2x12x15 4

8. Door handle incl. screws 1

9. Supporting bracket 1

Assembly kit model ETS 1500

Complete delivery should include:

pA cabinet with a fan unit installed

pAssembly kit

pUser manual

__________________________________

Check that all transportation aids have been

removed before connecting the dryer.

¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

__________________________________

Packaging materials such as plastic and styro-

foam should be kept out of the reach of children.

¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

Assembly kit model ETS 1500F

Qty.

1. Screw TRX 5x70 fzk 7

2. Washer NB 5x25 4

3. Plastic plug 7

4. Spacer 8.2x12x15 4

5. Supporting bracket 1

6. Door handle incl. screws 1

______________________________________

NOTE: Thedrying cabinetshouldbe handled ca-

refully if it is only standing on its wooden

pallet! RISK OF TIPPING OVER!

______________________________________

UNPACKING



MAN

60°

40° -+

MAN40° 2:30

START

STOPP

OFF

ECODRYER



REHANGING THE DOOR

The door can be hinged on the left or the right.

1Lay the dryer down on its back.

Open the door fully and support it in its open

position using a chair or similar. The door must

not be opened more than 180°.

3Release the four screws retaining the control

module. The screws are on the top of the

control module.

4Slant the module out so as to gain access to

the lower hinge pivot pin.

5Close the door.

6Release the lower pivot pin using a set

spanner and remove the door.

7Release the upper pivot pin with a

screwdriver and move the pin over to the

opposite side. First release the plastic plug

and press it in on the opposite side.

8Rotate the door, oer up the door and screw

it in place with the lower pivot pin.

9Ret and retighten the screws on thecontrol

module.

1. Control module

2. Upper hinge pin

3. Screwdriver

4. Lower hinge pin

FITTING THE DOOR HANDLE

Fit the door handle with the xing screws supp-

lied.

The illustration shows

model ETS 1500

______________________________________

WARNING! The plug must be unplugged from

the wall socket.

______________________________________

INSTALLATION

230 mm 1

1450 mm

1. Supporting bracket

2. Pre-drilled holes

3. Attachment screw with washer

4. Plastic plug

5. Wall behind the drying cabinet

6. Spacer

7. Drying cabinet back wall

The illustration

shows model

ETS 1500

_____________________________________________

The drying cabinet must be installed and kept indoors.

_____________________________________________

____________________________________________

The drying cabinet must not be installed where high-

pressure water jets are used for cleaning.

____________________________________________

The drying cabinet can conveniently be installed

above a front-loading washing machine.

____________________________________________

However, it must hang on the wall and not placed directly

on top of the washing machine. This is to avoid vibration

when the washing machine is running. A supporting

bracket is supplied with the drying cabinet.

____________________________________________

Mark up for the supporting bracket and secure it to the wall

with screws. Screws are supplied in the installation kit.

2 Hang up the cabinet.

The cabinet must be secured to the wall to prevent it tipping

forward.

Open the door and drill 8 mm holes in the wall through the

four pre-drilled holes in the rear of the drying cabinet.

Insert plastic plugs in to the holes in the wall. Place a spacer

on the screw and install with a washer as shown in the il-

lustration. Screws are supplied in the installation kit.

____________________________________________

WARNING! The drying cabinet must not be used unless

it is xed to the wall, due of the risk of tip-

ping forward.

____________________________________________

POSITIONING

INSTALLATION

Air intake

___________________________________

The air intake must not be blocked.

___________________________________

1. Draft stabilizer

2. Hose

3. Spigot

EXHAUST CONNECTION, MODEL ETS 1500

___________________________________

The drying cabinet must not be connected to

a replace chimney.

___________________________________

pFit the spigot supplied to the hose. Ax

the spigot and hose to the dryer top.

Connect the other end of the hose to the

draft stabilizer which should then be rmly

attached to the exhaust air valve.

When the drying cabinet is working, 45 m³ of moist air are evacuated per hour. This air is taken

from the room where the dryer is sited. Hence make sure air can enter the room to replace the

moist air leaving.

1. By means of a draft stabilizer

The drying cabinet should be connected to a standard register.

The drying cabinet can be connected to an exhaust duct in two ways: either with a draught inter-

rupter or rigidly connected to an exhaust air ventilation system.

If the drying cabinet is to be connected to an existing ventilation system, a draught interrupter must

always be used, so that the general ventilation in the room is not aected.

Only use a rigid connection when a separate exhaust air duct has been provided for the drying cabinet.

The air ow in the exhaust duct should be adjusted to 45 m³/hour.

The drying cabinet has been tested and set at the factory for connection with a draught interrupter.

Humid air out

INSTALLATION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NIMO Trockner Handbücher

NIMO

NIMO PRO FT 120 VP Bedienungsanleitung

NIMO

NIMO KM 80 Bedienungsanleitung

NIMO

NIMO ECO Dryer 2.0 HP Bedienungsanleitung

NIMO

NIMO FT 120 VP Bedienungsanleitung

NIMO

NIMO ETS 1700E Bedienungsanleitung

NIMO

NIMO KM 80 Bedienungsanleitung

NIMO

NIMO ETS 1500 E Bedienungsanleitung

NIMO

NIMO Easy Dryer 1900 Bedienungsanleitung

NIMO

NIMO PRO FT 120 FL Bedienungsanleitung

NIMO

NIMO Easy Dryer 1700 Bedienungsanleitung

NIMO

NIMO ECO Dryer 2.0 HP Bedienungsanleitung

Beliebte Trockner Handbücher anderer Marken

Bosch

Bosch WTA79200GB Bedienungsanleitung

Amana

Amana W10233410A Bedienungsanleitung

Miele

Miele TWH 780 WP Bedienungsanleitung

Asko

Asko T760 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Bedienungsanleitung

Bosch

Bosch Logixx 10 WTB76556GB Technisches Datenblatt

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Bedienungsanleitung

Electrolux

Electrolux EW2H328R2 Bedienungsanleitung

Beko

Beko DS8433RX1M Bedienungsanleitung

Dawlance

Dawlance Spinner DS 6000 C Bedienungsanleitung

Electrolux

Electrolux TP5080TW Bedienungsanleitung

AEG

AEG TR838P4OB Bedienungsanleitung

Indesit

Indesit IDV 75 Bedienungsanleitung

Infiniton

Infiniton SD-DG85C Bedienungsanleitung

BOMANN

BOMANN WT 5019 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Bedienungsanleitung

Asko

Asko T793C Bedienungsanleitung

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Bedienungsanleitung