Ningbo KPT-2012B Bedienungsanleitung

Tower Ceramic Heater

Instruction manual

Model: KPT-2012B

Important Safeguards

When using electrical appliances, in order to reduce

the risk of fire, electric shock and/or injury, these

basic safety precautions should always be followed:

For Your Safety

Read all instructions carefully, even if you are quite

familiar with the appliance.

•To prevent fire or shock hazard, DO NOT expose

this appliance to rain or moisture.

•Dangerous high voltages are present inside this

enclosure. To avoid electric shock, DO NOT open

the cabinet, refer servicing to qualified personnel

only.

•To protect against fire, electrical shock and injury

to persons, do not immerse the unit, plug or cord in

water or spray with liquids.

•Do not expose this appliance to dripping or

splashing or objects filled with liquids, such as vases.

Dry location use only.

•No naked flames sources, such as candles, should

be placed on the product.

•Ventilation holes should not be impeded by any

items, such as newspaper, blankets, tablecloths,

curtains etc. Slots and opening are provided for

ventilation to ensure reliable operation of the

product and to protect it from overheating. Do not

use any object to cover this appliance.

•Do not use the appliance in a 40°C environment.

•Only connect to a suitable AC 240V~50Hz mains

wall outlet. Do not overload the wall outlet.

•Always use a fireguard when children, animals and

infirm persons can come into contact with the

heater.

•Never leave the appliance unattended when it is

in use. Never leave children unsupervised in a

room where the heater is ON and unguarded.

•Do not position this heater immediately below or in

front of a socket outlet.

•This heater is hot when in use or after use. To avoid

burns, do not let bare skin touch hot surfaces. Let

the heater cool before moving. Keep combustible

materials such as furniture, pillows, bedding,

papers, clothes and curtains well away from the

heater. Do not drape laundry or any other items

over the heater.

•Ensure that the heater is placed at a distance of at

least 50cm away from walls when in use.

•This appliance is not intended for use by persons

(including children) with reduced physical, sensory

and mental capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

•Young children should be supervised to ensure that

they do not play with the appliance.

•Do not operate the heater with a damaged cord

or plug, or after the heater malfunctions, has been

dropped or is damaged in any manner. Seek

advice from your local qualified service

technician.

•This appliance is intended for indoor use only. Do

not use the heater outdoors.

•This heater is not intended for use in bathrooms,

laundry areas or similar moist indoor locations.

Never locate the heater where it may fall into a

bathtub or other water container.

•Do not use this heater in the immediate

surroundings of a bath, a shower or a swimming

pool.

•Do not run the power cord under carpeting or

cover the cord with throw rugs, runners or the like.

Arrange the cord away from traffic areas and

where it will not be tripped over.

•Do not place the cord over any part of the heater.

•Do not plug this heater into an extension lead,

double adaptor or power board.

•Do not operate unless the cord is fully extended.

•Do not attempt to repair, disassemble or modify

the appliance. There are no user-serviceable parts.

•To disconnect the heater, switch the appliance

OFF and then remove the plug from the outlet.

•Always unplug the heater when not in use.

•Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause

an electric shock, fire or could damage the

heater.

•This heater has hot electrical parts inside. DO NOT

use it in areas where gasoline, paint or flammable

liquids are used or stored.

•Use the heater only as described in this instruction

manual. Any other use is not recommended by the

manufacturer and may cause fire, electric shock

or injury. Never use the heater to dry clothes, etc.

•Always uncoil the power cord before applying

power.

Warning: In order to avoid overheating, do not cover

the heater.

Cautions:

Do not operate the appliance on an inclined surface.

Do not move the appliance while the appliance is

switched on.

In order to avoid a hazard, this appliance must not be

powered through an external switching device, such

as a timer.

Warning

If the supply cord is damaged, the cord must be

replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

Always seek advice from a qualified service technician

or electrician.

This product has not been designed for any uses other

than those specified in this booklet.

Save These Instructions

Features of Your Heater

NOTE: The remote control buttons perform the

same functions as those on the control panel of

the unit, but you will need to press the buttons.

1. LED display screen

2. ON/Standby button

3. Set TIMER or Temperature button

4. Temp. + button or TIMER + button

5. Temp. –button or TIMER - button

6. Swing button

7. Heat button(1200W or 2000W)

Your Tower Ceramic Heater

Congratulations on the purchase of your new Tower

Ceramic Heater. Before first using your Heater, it is most

important that you read and follow the instructions in

this booklet, even if you feel you are quite familiar with

this type of appliance.

Your attention is drawn particularly to the section

dealing with IMPORTANT SAFEGUARDS. Find a place

and keep this booklet handy for future reference.

Your Linda Tower Ceramic Heater is safe and easy to

use. It has been designed to function quietly and safely

under normal circumstances.

This quality Linda Tower Ceramic Heater is fully portable,

with a sturdy base and a modern design.

This appliance has been designed to operate from a

standard domestic power outlet. It is not intended for

industrial or commercial use.

The surface of appliance becomes very hot when

operating. Keep children and adults away from hot

surfaces to avoid burns or clothing ignition. The

appliance will remain hot for a time after shut down.

Allow surfaces to cool before touching.

Operation of your heater

1. Before inserting the plug into an electrical outlet,

make sure that the electrical supply in your area

matches that on the rating label on the unit. Ensure

that the appliance has no damage or physical

defects. Insert the power plug into the mains outlet

with AC 240V~50Hz source, ensure that the plug

and the socket fit well.

2. When plugged in, turn on the Mains power switch

which located on the back side of the heater.

3. Turn on/Standby:

Touch ON/Standby button to switch the heater on.

Note: You may experience odours when the

appliance is switched on for the first time. To

avoid any discomfort, place the heater in a

well-ventilated area for 10 minutes when switched

on for first time.

Touch the ON/standby button again to switch off

the unit.

4. Adjust the heat mode:

You can select the desired heat mode by touching

the HEAT button.

a. Low heating (1200W)

b. High heating (2000W)

5. TIMER setting function:

This heater is equipped with a 12 hours timer. This

enables you to preset the appliance to switch off

automatically from 1 to 12 hours in 1h increments.

Touch the SET button once, “0 H” will appear on

screen and begin to flash. You can touch the "+" or

"-" buttons to set the timer.

Note: The unit will be automatically turned off when

the set time is reached. The time will be set within 5

seconds once you finish touching the button and

the time setting value will display on the LED screen

later. When the time runs out, the heater will turn

off.

You can set the timer to 0H to turn off the timer

setting function.

6. Automatic heating function:

Touch the SET button 2 times, “X”ºC will appear on

screen and begin to flash. Touch "+" or "-" buttons to

adjust the temperature as your desired comfort

setting from 15 to 35 Celsius degree. After the

temperature is set, the display will shows room

temperature.

When the room temperature reaches the preset

temperature, the heating function will cut off

automatically. When the room temperature is

lower than 3 degrees of preset temperature, the

low or high heating will turn on automatically.

7. Swing function:

To activate the Swing feature, touch the SWING

button once. Touch the SWING button again to turn

the Swing feature off.

Warning:

The heater will remain hot for some time after it is

turned off; handle with care.

Always turn off the Mains power switch and remove

the power plug from the mains outlet after use.

REMOTE CONTROL

The remote control requires one "CR2032" type 3-volt

lithium battery (included). To extend the life of the

original battery we have inserted a small clear plastic

spacer tab between the lithium battery and the

battery terminal. Please remove this battery spacer tab

before using.

•If the operation of the remote control becomes

unsatisfactory, replace with a new 3-volt lithium

battery.

1. Place the remote control with the control buttons

facing downward.

2. Touch the locking arm of the battery cover and

pull out the tray.

3. Take out the exhausted 3V CR2032 battery and

replace a new one into the battery tray with the

positive “-” side facing up, observing the polarity

markings. If the battery is placed incorrectly, the

remote control will not work.

4. Insert the battery holder into the battery

compartment.

•Using the Remote Control to operate the

appliance

1. For the best results, aim the Remote Control

directly at the remote sensor on the front

panel of the heater.

2. Do not put any objects between the Remote

Control and the heater while operating the

appliance.

3. Operate the remote control within a 3-meter

range and an angle of 60 degrees.

Notes:

1. Keep batteries out of children’s reach.

2. Remove the battery if it is exhausted or if the

remote control is not being used for a long time.

3. When there is a strong ambient light source, the

performance of the infrared remote sensor may

be degraded, causing unreliable operation.

4. Batteries contain chemical substances, so they

should be disposed properly.

Overheat protection

This product is manufactured with a heat protection

device that, in the event that the appliance is

subjected to excessive heat, the thermal cut off will

activate and switch the heater function off.

If it cuts-off due to an obstruction in the airflow, the

heater must be allowed to cool for 30 minutes and

the obstruction must be removed before restarting.

Safety Device

This appliance comes equipped with a tip over

switch. It will cut off the power due to accidental

knocking over in the event of accidentally knocking

the product over. If this occurs, take care when

handling the appliance especially avoiding the

front grill as this will still be very hot. Do not leave

the appliance in the “tipped” position.

Always ensure the unit is placed on flat stable

surface.

Specifications

Power supply: AC 120V~60Hz

Power consumption: 2000W

Care and Cleaning

Always ensure the heater has cooled completely

before cleaning and maintenance.

•Always switch off the appliance and unplug it from

the electrical socket and wait for it to cool down

before cleaning. Allow the unit to cool down

completely.

•Avoid contact with heat surfaces.

•Never spray with liquids or submerge the

appliance in water or any other liquid.

•Keep the heater clean. Do not allow any objects

to enter any ventilation or exhaust opening as this

may cause electric shock or fire or damage to the

heater.

•Do not use harsh chemicals or solvents to clean

this product and avoid using abrasive cleaning

agents. Use a slightly dampened, lint-free cloth to

clean this appliance.

•Store the appliance in its original box and in a dry

place to protect it from dust if it will not be used for

a long period of time.

Warning: NEVER immerses the unit, power cord

and plug in water or any liquid while cleaning and

never allow water to drip into the appliance.

Note: If the cordset of the appliance becomes

damaged, discontinue use. Repair should be

undertaken only by a qualified electrician or service

technician.

Inhaltsverzeichnis

Andere Ningbo Heizung Handbücher

Ningbo

Ningbo GYD-B-7 Technisches Handbuch

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung