9
1) Please cover the machine properly to keep it away from dust when stop using it.
2) Clean the enclosure, roller and cushion with alcohol or wet soft cloth in time.
3) Before cleaning, make sure to turn off the power and pull out the power plug.
4) Please use the alcohol detergent when cleaning the cover, never use other kinds of
detergent with corrosive, and avoid defacing the plastic cover or erasing the characters
on the cover.
Ⅷ. Troubleshooting Table
Faults Cause Solution
1 Paper Feeding
tray empty
with LED “1”on
No paper paper on the
workbench Add more paper for folding
2 No Paper Outlet
with LED “4”on 1. Paper jam
2. The paper jam sensor
failure
1. Carefully remove the two
folding plates, and jog the
“stop” key, and so the
jammed paper can be taken
out
2. Clear the stain on the sensor
3 Paper feeding
slip 1. The roller or the roller
rubber has been
contaminated.
2. The paper is too slipping.
3. The driving V-belt is slip.
4. The roller or the roller
rubber has been worn and
torn.
5. The one-way driving
device of the
synchrowheel is failure.
1. Bedew the soft cloth with
alcohol to clean the surface.
2. Select the proper paper.
3. Adjust the V-belt with the
strain pulley.
4. Replace the worn and torn
parts.
5. Replace the synchrowheel
parts.
4 Paper jam 1. Maybe there are paper
segments in the paper
path.
2. The paper is too thin.
3. The paper is not placed at
the right position.
4. Folding cases are not
mounted correctly.
5. The plastic roller is
contaminated.
1. Clean up the paper segments.
2. Select the proper paper.
3. Place the paper correctly.
4. Install folding case right.
5. Clean up the roller with a
soft cloth with alcohol.
5 The folding parts
create creases. 1. There are paper segments
on the roller. 1. Clean up paper segments or
other stain on the roller.
