Ninja BL773CO Mega Kitchen System Bedienungsanleitung

Mega Kitchen System®

OWNER’S GUIDE

BL773CO

www.ninjakitchen.com

1-877-646-5288

1TOLL FREE: 1-877-646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES,

BASIC SAFETY PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED, INCLUDING THE

FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING

YOUR NINJA®MEGA KITCHEN SYSTEM®.

POLARIZED PLUG

WARNING: To reduce the risk of electric shock,

this appliance has a polarized plug (one blade

is wider than the other). This plug will ﬁt into a

polarized outlet only one way. If the plug does

not ﬁt fully into the outlet, reverse the plug. If it

still does not ﬁt, contact a qualiﬁed electrician

to install the proper outlet. DO NOT modify the

plug in any way.

CAUTION: Blade assemblies are sharp,

handle with care. When handling the blade

assemblies, always hold by the shaft.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK

OR INJURY:

1. To protect against electrical shock, do not

submerge the appliance or allow the power cord

to come into contact with water or any other

liquid.

2. DO NOT allow young children to operate the

appliance or use as a toy. Close supervision is

necessary when any appliance is used by or near

children.

3. Never leave an appliance unattended when in

use.

4. Turn the appliance Off and remove the power

cord from the electrical outlet when not in use,

before assembling or disassembling parts and

before cleaning. To unplug, grasp the plug and

pull from the electrical outlet. Never pull from the

power cord.

5. DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to

disconnect from electrical outlet; instead grasp

the plug and pull to disconnect.

6. DO NOT operate any appliance with a damaged

cord or plug, or after the appliance malfunctions,

has been dropped or damaged in any manner.

This appliance has no serviceable parts. Return

the appliance to EURO-PRO Operating LLC for

examination, repair or adjustment.

7. DO NOT let the power cord hang over the edge of

table or counter or touch hot surfaces such as the

stove.

8. Always use appliance on a dry, level surface.

Euro-Pro, Mega Kitchen System, Nutri Ninja, and

Ninja are trademarks of Euro-Pro Operating LLC.

www.ninjakitchen.com

9. Keep hands, hair, clothing, as well as utensils

out of container while processing to reduce the

risk of severe injury to persons or damage to the

appliance. A scraper may be used but only when

the appliance is not running.

10. CAUTION: Blade assemblies are sharp,

handle with care. When handling the blade

assemblies, always hold by the shaft.

11. Avoid contact with moving parts.

12. DO NOT attempt to sharpen blades.

13. DO NOT use the appliance if blade assembly is

bent or damaged.

14. To reduce risk of injury, never place the blade

assembly on base without pitcher or bowl

properly attached.

15. DO NOT operate this appliance on or near any hot

surfaces (such as gas or electric burner or in a

heated oven).

16. The use of attachments or accessories

including canning jars, not recommended by the

manufacturer may result in ﬁre, electric shock or

personal injury.

17. DO NOT remove the container from the motor

base while the appliance is in operation.

18. To reduce the risk of injury, NEVER operate the

appliance without the lid in place; DO NOT try to

defeat the interlock mechanism; make sure that

the blade assembly is properly installed before

operating the appliance.

19. DO NOT expose containers to extreme

temperature changes.

20. CAUTION: DO NOT PROCESS HOT FOODS OR

HOT LIQUIDS

21. DO NOT overﬁll.

22. Never feed food by hand when using the food

processor. Always use the food pusher.

23. DO NOT operate the appliance empty.

24. To reduce the risk of burns, always allow the

appliance to cool before taking off parts and

before cleaning.

25. In the event that the unit overheats, the control

panel lights will ﬂash and the unit will shut down.

Unplug the unit and wait 15 minutes to reset.

26. THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use this

appliance for anything other than its intended use.

Do not use outdoors.

27. The maximum rating is based on the Stacked

Blade Assembly (pitcher) that drives the greatest

power and other recommended attachments may

draw signiﬁcantly less power or current.

WARNING: Extension cords are not

recommended for use with this product.

SAVE THESE

INSTRUCTIONS

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.

Power: 1500 Watts

Pitcher Capacity: 72 oz. (9 cups, 2.1 L)

Bowl Capacity: 64 oz. (8 cups, 1.9 L)

Nutri Ninja®Capacity: 16 oz. (2 cups, 470 mL)

3TOLL FREE: 1-877-646-5288

Getting To Know Your Ninja®Mega Kitchen System®

CAUTION: Blade assemblies are sharp, handle with

care. When handling the blade assemblies, always

hold by the shaft.

NOTE: Blade assemblies are not interchangeable.

NOTE: All jars, lids, discs and blades are dishwasher safe.

All jars, lids and plastic components of blade and disc

assemblies are BPA free.

Contents

Thank you for

purchasing

the Ninja®

Mega Kitchen

System®.

Getting to Know Your Ninja® Mega Kitchen System®............................................................3

Using the Ninja®Mega Kitchen System®...........................................................................4

Assembly and Use for the 72 oz. Pitcher.............................................................................5

Assembly and Use for the Nutri Ninja®Cup.........................................................................7

Assembly and Use for the 64 oz. Bowl................................................................................8

Assembly and Use for the Disc Attachments .....................................................................10

Speed Setting & Uses......................................................................................................11

Care & Maintenance .......................................................................................................12

Troubleshooting Guide.....................................................................................................13

Replacement Parts..........................................................................................................13

Warranty & Registration...................................................................................................14

Nutri Ninja®

Cup (x3)

Nutri Ninja®

Blade Assembly

To-Go Lid

(x3)

Motor BaseStacked Blade

Assembly (Pitcher)

Pitcher Lid72 oz. Pitcher

Food Processor Bowl Dough

Blade

Chopping

Blade

Spindle for

Discs Feed Chute Lid with

Two Part Pusher

Grating

Disc

Reversible Slicing/

Shredding Disc

www.ninjakitchen.com

Using the Ninja®Mega Kitchen System®

BEFORE FIRST USE

CAUTION: Blade assemblies are sharp, not locked

in place and removable, handle with care. When

handling the blade assemblies, always hold them

by the shaft.

1Remove all packaging material and labels from the

appliance.

2Wash the lids, pitcher, bowl, Nutri Ninja®cups and

blade assemblies in warm, soapy water with a soft

cloth. Use caution when washing the blade

assemblies as the blades are very sharp.

3Rinse and dry thoroughly.

4The pitcher, bowl, Nutri Ninja®cups, lids and blade

assemblies are all dishwasher safe. It is recommended

that the lids and blade assemblies be placed on the top

rack. Ensure that the blade assemblies are removed

from the containers before placing in the dishwasher.

5Wipe the motor base clean with a damp cloth.

PLEASE KEEP THESE IMPORTANT

SAFEGUARDS IN MIND WHEN

USING THE APPLIANCE:

IMPORTANT: Never add ingredients into the

container before placing the attachment in ﬁrst.

IMPORTANT: Attachments are not

interchangeable.

CAUTION: Blades are sharp! Use extreme

caution when handling the blade

assemblies. Always hold them by the shaft.

IMPORTANT: DO NOT attempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empty.

CAUTION: DO NOT PROCESS HOT FOODS OR

HOT LIQUIDS.

CAUTION: Never remove the container while

the appliance is still running.

WARNING: Never leave the appliance

unattended while in use.

CAUTION: Blades

are not locked

in place. If using

the pour spout,

ensure the lid

is fully locked

onto the blender

pitcher.

CAUTION: Blades

are not locked in

place. If pouring

with the lid

removed, ALWAYS

remove the blade

assembly ﬁrst.

5TOLL FREE: 1-877-646-5288

Fig. 3b

Fig. 2

Fig. 1

Assembly and Use for the 72 oz. Pitcher

CAUTION:

Blade assemblies are sharp, not locked

in place and removable, handle with care. When

handling the blade assemblies, always hold them

by the shaft.

IMPORTANT: Make sure that the motor base is plugged

in for use.

1Place the motor base on a clean, dry, level surface such

as a counter or table top.

2Align and lower the pitcher onto the motor base. (Fig. 1)

Handle should be aligned slightly to the right of the “LOCK”

symbol on the motor base.

3Rotate the pitcher clockwise as far as it will go to lock in

place. (Fig. 2)

4The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

5Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the

blade assembly

is seated properly and is

standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will ﬁt loosely on the

drive gear.

6Add the ingredients to the pitcher, making sure that they

do not exceed the highest measured marking line on the

side of the pitcher.

7Holding the lid by the handle in the upright position, place

it on top of the pitcher aligning the arrow ( ) located on

the lid with the arrow ( ) located on the pitcher’s handle.

(Fig. 5) Press the handle down until you hear a click.

8Plug the power cord into the electrical outlet and press

the power button ( ).

NOTE: As a safety feature, the power button

( ) will ﬂash and the motor will not work if the

pitcher and lid are not installed correctly. When

the pitcher and lid are installed properly, the

power button ( ) will be solid, indicating that the

appliance is ready for use.

Fig. 4

Fig. 5

Assembly

Fig. 3a

www.ninjakitchen.com

9Select the speed that best suits your needs. (Fig. 6)

NOTE: Pulse ingredients for even chopping by pressing

down in short intervals.

10 When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and

wait for the blade assembly to stop turning. (Fig. 7)

11 To remove the lid, press the release button on the lid,

pull the lid handle up to a 90° angle and lift the lid off.

Turn the pitcher counter clockwise and then lift off the

base. (Fig. 7, Fig. 8)

CAUTION: Never insert your hands in the pitcher

as the blades are sharp. Always use a spatula to

dislodge food that has stuck to the sides of the pitcher.

Fig. 7

USE REMOVAL

Fig. 6 Fig. 8

12 Depending on the consistency of the contents in the

container, open the pour spout cap and use the spout

to empty liquid contents. For thicker consistencies,

remove the lid and blade assembly carefully (by its

shaft), then empty contents from the container.

13 Make sure that the unit is unplugged when not in use.

CAUTION: Blades are not locked

in place. If using the pour

spout, ensure that the lid is

fully locked onto the blender

pitcher.

CAUTION: Blades are not

locked in place. If pouring

with the lid removed, ALWAYS

remove the blade assembly

ﬁrst before pouring.

WARNING: Never leave the appliance unattended while in use.

7TOLL FREE: 1-877-646-5288

Use caution when handling the blade

assemblies.

IMPORTANT: Make sure that the motor base is

plugged in for use.

1Place the motor base on a clean, dry, level surface

such as a counter or table top.

2Add ingredients to the Nutri Ninja®cup.

3Place the Nutri Ninja®blade onto the cup and screw it

tightly until you have a good seal. (Fig. 1)

4Turn the Nutri Ninja®cup upside down and place it onto

the motor base, aligning the tabs on the cup with the

motor base. Turn the Nutri Ninja®cup clockwise until

you hear a click. (Fig. 2) Turn the power button on, the

Nutri Ninja®button will illuminate.

5Press down on the Nutri Ninja®button in short intervals

to activate. (Fig. 3)

Fig. 1 Fig. 2

Assembly and Use for the Nutri Ninja®Cup

Fig. 3 Fig. 4 Fig. 5

ASSEMBLY PULSE REMOVAL

6 Once you have reached your desired consistency,

turn the power button off. Turn the Nutri Ninja®cup

counterclockwise and pull straight up to remove.

(Fig. 4) (Fig. 5)

NOTE: Do not overﬁll! To avoid spilling, do not add

ingredients past the “Max” ﬁll line.

7Turn the cup upright and remove the Nutri Ninja®blade

by twisting the blade assembly counterclockwise.

8Place the To-Go lid onto the Nutri Ninja®cup, twist

clockwise to seal and enjoy!

9Make sure that the motor base is unplugged when not

in use.

NOTE: To order additional Nutri Ninja®Cups, please visit

our website: www.ninjakitchen.com or feel free to contact

customer service: 1-877-646-5288.

For best results, use short “PULSES”... Practice makes perfect!!

WARNING: Never leave the appliance unattended while in use.

www.ninjakitchen.com

Fig. 1

Fig. 2

Assembly and Use for the 64 oz. Bowl

ASSEMBLY

Fig. 3a

Fig. 3b

Use caution when handling the blade assemblies.

IMPORTANT: Make sure that the motor base is

plugged in for use.

1Place the motor base on a clean, dry, level surface such

as a counter or table top.

2Align and lower the bowl onto the motor base. (Fig. 1)

Handle should be aligned slightly to the right of the

“LOCK” symbol on the motor base.

3Rotate the bowl clockwise as far as it will go to lock in

place. (Fig. 2)

4The bowl can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

5Holding the desired blade by the top of the shaft, place

it onto the drive gear inside the bowl. Ensure that the

blade assembly is seated properly and is standing

upright. (Fig. 4)

NOTE: The blade will ﬁt loosely on the drive gear.

6Add the ingredients to the bowl, making sure that they

do not exceed the highest measured marking line on

the side of the bowl.

7Holding the lid from the feed chute, place it on top of

the bowl and turn clockwise aligning the arrow ( )

located on the lid with the arrow ( ) located on the

bowl’s handle. You will hear a click when the lid is

locked in place. (Fig. 5)

8Plug the power cord into the electrical outlet and press

the power button ( ).

NOTE: As a safety feature, the power button ( )

will ﬂash and the motor will not work if the bowl

and lid are not installed correctly. When the

bowl and lid are installed properly, the power

button ( ) will be solid, indicating that the

appliance is ready for use.

NOTE: The 64 oz. bowl is not intended for

blending drinks. Do not overﬁll. To add liquids

during processing, remove the food pusher

from the feed chute to drizzle in liquids. Do not

remove the lid while in use.

Fig. 4

Fig. 5

WARNING: Never leave the appliance unattended while in use.

9TOLL FREE: 1-877-646-5288

USING THE CHOPPING BLADE ASSEMBLY

1Holding the chopping blade assembly by the shaft,

place it onto the gear shaft inside the bowl. Ensure that

the blade assembly ﬁts around the gear shaft and that it

is standing straight.

2Add the ingredients and secure the bowl lid onto the

bowl. (Fig. 1)

3Plug the power cord into the electrical outlet and press

the power button ( ).

4Select the speed that best suits your needs. Pulse

ingredients for even chopping by pressing down in short

intervals.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

5When you have reached your desired consistency, stop

the appliance by pressing the power button ( ) and

wait for the blade assembly to stop turning.

6To remove the lid, press the release button and turn the

lid counterclockwise and lift the lid off. Turn the bowl

counterclockwise and then lift off the base.

(Fig. 2, Fig. 3)

CAUTION: Blades are not locked in place. If

pouring from the bowl, ALWAYS remove the blade

assembly ﬁrst before pouring.

Fig. 1 Fig. 4

USE

Fig. 2

Fig. 3

REMOVAL USE

USING THE DOUGH BLADE

WARNING: Never leave the appliance unattended while

inuse.

IMPORTANT: Push down lightly on the base to ensure the

suction feet are adhered to the surface.

1Holding the dough blade by the shaft, place it onto the

gear shaft inside the bowl. Ensure that the blade assembly

ﬁts around the gear shaft and that it is standing straight.

(Fig. 4)

2Add the ingredients and secure the bowl lid onto the bowl.

3Plug the power cord into the electrical outlet and press on

the power button ( ). Select Speed 1 on the control panel

and process until ingredients come together to form a mass.

NOTE: Please refer to “Speed Settings & Uses” chart for

suggested uses and speeds.

4Once ﬁnished making dough, stop the appliance by

pressing the power button ( ) and wait for the blade

assembly to stop turning.

5To remove the lid, press the release button and turn the lid

counterclockwise. (Fig. 2)

6Turn the bowl counterclockwise and lift it to remove it from

the motor base. (Fig. 3)

7To release the motor base from the counter or table top,

lift the base up from underneath the sides of the unit.

Release paddles on both sides will help to disengage the

suction feet from the surface.

NOTE: The suction feet provide added stability.

Assembly and Use for the 64 oz. Bowl - cont.

Andere Handbücher für BL773CO Mega Kitchen System

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ninja Mixer Handbücher

Ninja

Ninja BL770REF Bedienungsanleitung

Ninja

Ninja BN750ME Bedienungsanleitung

Ninja

Ninja TWISTI SS150 Series Bedienungsanleitung

Ninja

Ninja Single Serve System Pulse BL100 Bedienungsanleitung

Ninja

Ninja BL49X series Bedienungsanleitung

Ninja

Ninja Foodi Series Montageanleitung

Ninja

Ninja BL450 Bedienungsanleitung

Ninja

Ninja BL621 Bedienungsanleitung

Ninja

Ninja BL642UK Bedienungsanleitung

Ninja

Ninja STORM QB751Q Series Bedienungsanleitung

Ninja

Ninja Ninja Chef High-Speed Series Bedienungsanleitung

Ninja

Ninja Professional Plus BN700C Series Bedienungsanleitung

Ninja

Ninja BN495UK Bedienungsanleitung

Ninja

Ninja NUTRI-BLENDER PRO BN400 Series Bedienungsanleitung

Ninja

Ninja Foody POWER NUTRI CB350UK Series Bedienungsanleitung

Ninja

Ninja Master Prep QB900 series Bedienungsanleitung

Ninja

Ninja Intelli-Sense CT680 Bedienungsanleitung

Ninja

Ninja BL492UK Bedienungsanleitung

Ninja

Ninja QB800 series Bedienungsanleitung

Ninja

Ninja FOODI SS400 Series Bedienungsanleitung

Ninja

Ninja Kitchen System Pulse BL209 Bedienungsanleitung

Ninja

Ninja BL660W Bedienungsanleitung

Ninja

Ninja 1000 Bedienungsanleitung

Ninja

Ninja Foodi SS351 Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken

ROTOR

ROTOR 1125.201 Bedienungsanleitung

Braun

Braun Multiquick 5 Vario series Bedienungsanleitung

ARENDO

ARENDO MIRA 305424 Bedienungsanleitung

CHEF-BUILT

CHEF-BUILT CCB-3500 Bedienungsanleitung

Viconte

Viconte VC-4406 Bedienungsanleitung

Oster

Oster BLSTAB-CB0 Bedienungsanleitung

HOFFEN

HOFFEN MC-3005 Bedienungsanleitung

Black & Decker

Black & Decker BLC18750DM Bedienungsanleitung

Sunbeam

Sunbeam 4182 Bedienungsanleitung

Bialetti

Bialetti FMX35 Bedienungsanleitung

Black & Decker

Black & Decker BL8000 Bedienungsanleitung

Duronic

Duronic BL530 Bedienungsanleitung

Exquisit

Exquisit MS 3002 wes Bedienungsanleitung

Lumme

Lumme LU-KP1891A Bedienungsanleitung

Binatone

Binatone HB-735 Bedienungsanleitung

Moulinex

Moulinex LM936E10 Bedienungsanleitung

Oster

Oster VERSA Installations- und Betriebshandbuch

Vigan Mammoth

Vigan Mammoth TM4V1 Bedienungsanleitung