Ninja Master Prep Professional QB1000C 30 Bedienungsanleitung

Master Prep™Professional

QB1000C 30

OWNER’S GUIDE

MANUEL DU PROPRIÉTAIRE

www.ninjakitchen.com

LIGNE

D’ASSISTANCE

1 877 646-5288

HELP

LINE

1 877 646-5288

QB1000C_30_IB_ENG_FRE_131007_4.indd 1 2013-10-07 9:10 AM

TOLL FREE: 1-877-646-5288

READ ALL INSTRUCTIONS BEFORE

USING YOUR NINJA®MASTER PREP™

PROFESSIONAL.

WHEN USING ELECTRICAL APPLIANCES,

BASIC SAFETY PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED, INCLUDING THE

FOLLOWING:

POLARIZED PLUG

WARNING: To reduce the risk of electric

shock, this appliance has a polarized plug

(one blade is wider than the other). This plug

will ﬁt into a polarized outlet only one way.

If the plug does not ﬁt fully into the outlet,

reverse the plug. If it still does not ﬁt,

contact a qualiﬁed electrician to install the

proper outlet. DO NOT modify the plug in

any way.

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WARNING: TO REDUCE THE

RISK OF FIRE, ELECTRIC SHOCK OR

INJURY:

1. Close supervision is necessary when any

appliance is used by or near children.

2. To protect against electric shock, DO NOT

immerse cord, plug or any part of the main

unit in water or any other liquids.

3. DO NOT let cord hang over edge of table or

counter, or touch hot surfaces.

4. DO NOT operate any appliance with a

damaged cord or plug, or after the appliance

malfunctions, has been dropped or damaged

in any manner. Return the appliance to

EURO-PRO Operating LLC for examination,

repair or adjustment.

5. Unplug appliance from outlet when not in

use and before cleaning.

6. DO NOT place on or near a hot gas or

electric burner.

7. The use of accessory attachments, including

canning jars not recommended by EURO-

PRO Operating LLC may cause ﬁre, electrical

shock or risk of personal injury.

8. Extreme caution must be used when moving

an appliance containing hot food, water or

other liquids.

9. Use this appliance on a stable work surface

away from water.

10.DO NOT remove the motor head before the

chopping blades have stopped turning.

11. CAUTION! Chopping blades are sharp,

handle with care. When handling the

chopping blades, always hold by the plastic

shaft.

QB1000C_30_IB_ENG_FRE_131007_4.indd 2 2013-10-07 9:10 AM

www.ninjakitchen.com

English

SAVE THESE

INSTRUCTIONS

NOTE: This unit has a short power supply

cord to reduce the risk resulting from

becoming entangled in or tripping over a long

cord. An extension cord may be used if you

are careful in its use:

1. The electrical rating of the extension cord

should be at least as great as the electrical

rating of the appliance.

2. An extension cord with the power cord

must be arranged so that it will not drape

over the countertop or tabletop where they

can be pulled on by children or tripped over

accidentally.

12. DO NOT attempt to sharpen

blades.

13. DO NOT expose jars to extreme

temperature changes.

14. DO NOT use jars if they are cracked or

chipped.

15. DO NOT use the appliance if chopping

blades are bent or damaged.

16. Avoid contact with moving parts at all

times. Keep hands, hair, clothing as well

as spatulas and other utensils away from

pitcher or chopping container during

operation to prevent risk of personal injury

and/or damage to the appliance.

17. Exercise extreme caution when blending hot

liquids.

18. Immediately release the On/Off pulse button

on the motor head in the event that the

appliance malfunctions during use.

19. To reduce the risk of injury, NEVER operate

the appliance without the splash guard in

place; DO NOT try to defeat the interlock

mechanism; make sure that the cutting

blades are properly assembled before

operating the appliance.

20. DO NOT use outdoors.

21. DO NOT use appliance for other than

intended use.

22. DO NOT operate the appliance for more

than 15 seconds.

23. DO NOT operate the appliance empty.

24. If the appliance overheats, a thermal

switch will become activated and shut off

the motor. To reset, unplug the appliance

and let it cool down for approximately 10

minutes before using again.

QB1000C_30_IB_ENG_FRE_131007_4.indd 3 2013-10-07 9:10 AM

TOLL FREE: 1-877-646-5288

THIS BOOK COVERS MODEL NUMBER:

QB1000C 30

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.

Power: 450 Watts

Pitcher Capacity: 1.5 L

Bowl Capacity: 0.5 L

Euro-Pro, Ninja, and Ninja Master Prep are trademarks

of Euro-Pro Operating LLC.

QB1000C_30_IB_ENG_FRE_131007_4.indd 4 2013-10-07 9:10 AM

www.ninjakitchen.com

English

Contents

Thank you for

purchasing

the Ninja®

Master Prep™

Professional.

Getting Started ......................................................................6

Using the Master Prep™Professional Pitcher ......................8

Using the Master Prep™Professional Bowl..........................10

Cleaning and Maintenance.....................................................12

Troubleshooting Guide...........................................................12

Warranty.................................................................................13

QB1000C_30_IB_ENG_FRE_131007_4.indd 5 2013-10-07 9:10 AM

TOLL FREE: 1-877-646-5288

Getting Started

iBowl Storage Lid

jPitcher Storage Lid

kPouring Spout

lPitcher Splash Guard

mNinja™6-Blade

nMaster Prep™Professional Pitcher

oSpindle Pin

pNon-Slip Base Gasket (pitcher)

qPower Cord (not shown)

aBowl Splash Guard

bUpper Blade (bowl)

cLower Blade (bowl)

dMaster Prep™Professional Bowl

eSpindle Pin

fNon-Slip Base Gasket (bowl)

gOn/Off Pulse Button

hPower Head

QB1000C_30_IB_ENG_FRE_131007_4.indd 6 2013-10-07 9:10 AM

www.ninjakitchen.com

English

The Ninja™Master Prep™Professional is an indispensable kitchen tool that is perfect for blending,

chopping, mixing or pureeing when preparing your favorite recipes. For best results, be sure to

carefully read all the instructions contained in the manual before using this appliance.

450 Watt Power Head

The 450 watt power head operates on 120V., 60Hz. electrical power. NEVER allow the power head to become

wet when plugged into an electrical outlet.

WARNING: The power head should never be immersed in water or any other liquid.

CAUTION: Make sure that the power head is unplugged from the electrical outlet and that the blades have

stopped turning before attaching or removing any accessory.

CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always hold

them by the shaft. Do not attempt to sharpen blades.

IMPORTANT: Never run the appliance empty.

QB1000C_30_IB_ENG_FRE_131007_4.indd 7 2013-10-07 9:10 AM

TOLL FREE: 1-877-646-5288

WARNING: DO NOT try to place the Ninja®

6-Blade onto the power head and then into the

Master Prep™Professional pitcher.

Using the Master Prep™Professional Pitcher

Shaft

CAUTION: Blades are sharp! Use extreme

caution when handling the blades. Always

hold them by the shaft.

IMPORTANT: Never run the appliance empty.

1Place the Master Prep™Professional pitcher on a

clean, dry, level surface.

2Holding the Ninja®6-Blade by the shaft, place

it onto the spindle pin inside the Master Prep™

Professional pitcher. (ﬁg. 1)

IMPORTANT: Place Ninja®6-Blade inside the

container carefully as blades are sharp.

Pouring Spout

QB1000C_30_IB_ENG_FRE_131007_4.indd 8 2013-10-07 9:10 AM

www.ninjakitchen.com

English

3Add the ingredients to be processed into the

Master Prep™Professional pitcher.

IMPORTANT: Never add ingredients into the

Master Prep™Professional pitcher before placing

the blades in ﬁrst.

4Place the pitcher splash guard onto the top of the

Master Prep™Professional pitcher. (ﬁg. 2)

5Place the power head on top of the pitcher splash

guard making sure that it is securely in place.

(ﬁg. 3) DO NOT attempt to operate the

appliance without the safety splash guard in place.

6To start the appliance, plug the power cord into the

electrical outlet, securely hold power head while

operating and press on the on/off pulse button

located on the top of the power head. (ﬁg. 4)

7Hold the Master Prep™Professional pitcher ﬁrmly

while depressing the on/off pulse button to ensure

the unit stays in place.

NOTE: DO NOT operate the appliance

continuously for more than 15 seconds at a time.

8To stop the appliance, remove your ﬁngers from the

on/off pulse button.

9In order to obtain a better quality of chopping,

operate the appliance by using the “pulse” method.

10 Make sure that the blades have stopped completely

before removing the power head.

11 If the ingredients stick to the side of the Master

Prep™Professional pitcher, stop the appliance,

remove the power head and the splash guard. Use

a spatula to dislodge the pieces and then replace

the splash guard and the power head. Continue

processing.

12 Depending on the consistency of the contents, use

the pouring spout to empty liquid contents.

13 For thicker consistencies, ﬁrst remove splash guard

and Ninja®6-Blade (by its shaft), then empty

contents of the Master Prep™Professional pitcher.

QB1000C_30_IB_ENG_FRE_131007_4.indd 9 2013-10-07 9:10 AM

TOLL FREE: 1-877-646-5288

Using the Master Prep™Professional Bowl

Shaft

CAUTION: Blades are sharp! Use extreme

caution when handling the blades. Always

hold them by the shaft.

IMPORTANT: Never run the appliance empty.

1 Place the Master Prep™Professional bowl on a

clean, dry, level surface.

2Holding the lower blade by the shaft, place it over

the spindle pin inside the Master Prep™Professional

bowl. (ﬁg. 1)

3Carefully insert the upper blade over the lower

blade rotating it until it locks onto the lower blade.

(ﬁg. 2)

IMPORTANT: Always assemble the blades inside

the container.

WARNING: DO NOT try to place the blades onto

the power head and then into the Master Prep™

Professional bowl.

4Place the food that you want to process into the

Master Prep™Professional bowl.

IMPORTANT: Never add ingredients into the

Master Prep™Professional bowl before placing the

blade assembly in ﬁrst.

NOTE: DO NOT add more than 500 ml or 250 ml

liquid ingredients as this will strain the motor and

may cause overﬂow.

QB1000C_30_IB_ENG_FRE_131007_4.indd 10 2013-10-07 9:10 AM

Inhaltsverzeichnis

Sprachen:

Andere Ninja Mixer Handbücher

Ninja

Ninja BL770REF Bedienungsanleitung

Ninja

Ninja NN210Q Bedienungsanleitung

Ninja

Ninja BL682ANZMN Bedienungsanleitung

Ninja

Ninja QB3000NZ Bedienungsanleitung

Ninja

Ninja Pulse BL204W Bedienungsanleitung

Ninja

Ninja BL480EU Bedienungsanleitung

Ninja

Ninja TWISTI SS150 Series Bedienungsanleitung

Ninja

Ninja BL487A Bedienungsanleitung

Ninja

Ninja Ultima BL810UK Bedienungsanleitung

Ninja

Ninja TWISTI CB150ANZ Bedienungsanleitung

Ninja

Ninja FOODI HB150ANZ Series Bedienungsanleitung

Ninja

Ninja AMZ012BL Bedienungsanleitung

Ninja

Ninja Master Prep QB750 Series Bedienungsanleitung

Ninja

Ninja Foodi SS351 Bedienungsanleitung

Ninja

Ninja BL640 Bedienungsanleitung

Ninja

Ninja Ultima BL820NZ Bedienungsanleitung

Ninja

Ninja BL200 series Bedienungsanleitung

Ninja

Ninja Master Prep Advantage QB800NZ 30 Bedienungsanleitung

Ninja

Ninja FOODI CI090 Series Bedienungsanleitung

Ninja

Ninja BL450QUK series Bedienungsanleitung

Ninja

Ninja BLENDER 1200 Bedienungsanleitung

Ninja

Ninja Foody POWER NUTRI CB100UK Bedienungsanleitung

Ninja

Ninja BL663 Bedienungsanleitung

Ninja

Ninja NJ600 Series Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken

ROTOR

ROTOR 1125.201 Bedienungsanleitung

Braun

Braun Multiquick 5 Vario series Bedienungsanleitung

ARENDO

ARENDO MIRA 305424 Bedienungsanleitung

CHEF-BUILT

CHEF-BUILT CCB-3500 Bedienungsanleitung

Viconte

Viconte VC-4406 Bedienungsanleitung

Oster

Oster BLSTAB-CB0 Bedienungsanleitung

HOFFEN

HOFFEN MC-3005 Bedienungsanleitung

Black & Decker

Black & Decker BLC18750DM Bedienungsanleitung

Sunbeam

Sunbeam 4182 Bedienungsanleitung

Bialetti

Bialetti FMX35 Bedienungsanleitung

Black & Decker

Black & Decker BL8000 Bedienungsanleitung

Duronic

Duronic BL530 Bedienungsanleitung

Exquisit

Exquisit MS 3002 wes Bedienungsanleitung

Lumme

Lumme LU-KP1891A Bedienungsanleitung

Binatone

Binatone HB-735 Bedienungsanleitung

Moulinex

Moulinex LM936E10 Bedienungsanleitung

Oster

Oster VERSA Installations- und Betriebshandbuch

Vigan Mammoth

Vigan Mammoth TM4V1 Bedienungsanleitung