Nixeus FreeSync EDG 27 Bedienungsanleitung
1
NX-EDG27 NX-EDG27S
Nixeus EDG 27" IPS (AHVA) 2560 x 1440 AMD FreeSync™ 144Hz Gaming Monitor
USER MANUAL
Version 8.31.2017
www.nixeus.com
2
Table of Contents
Important Information 3
Getting Started 5
Input and Connection Ports 6
Monitor & Stand Adjustment 7 - 8
Monitor Button Operations - Legends and Functions 9
Video Source Input Select 10
Volume 11
Brightness 12
Button Functions and Features for On Screen Display (OSD) Main Menu 13
On Screen Display (OSD) PICTURE Sub-Menu 14
Brightness Adjustment 14
Contrast Adjustment 15
Sharpness Adjustment 16
Aspect Ratio Adjustment 17
Ultra Vivid Adjustment 18
Dynamic Contrast Ratio Adjustment (DCR) 19
On Screen Display (OSD) COLOR Sub-Menu 20
Color Effects 20
Saturation 21
Gamma 22
Temperature - Presets 23
User Settings (Red, Green, Blue Adjustment for Color Calibration) 23 - 25
On Screen Display (OSD) - Advance Sub-Menu 26
Volume 26
Audio Source 27
DP Option 28
Over Drive 29
Low Blue Ray 30
On Screen Display (OSD) - OSD Settings Sub-Menu 31
Language 31
Menu Time 32
OSD H Position (Horizontal) 33
OSD V Position (Vertical) 34
Transparency 35
OSD Rotate 36
Reset 37
Enabling AMD FreeSync™ Technology 38 - 39
Warranty Information 40 - 41
Electronics Recycling and Proper Electronics Disposal 41
Nixeus Technology, Inc - Contact Information 41
Disclaimer 42
3
Important Information
Important Note:
Please make sure your computer hardware and graphics card supports the Nixeus EDG 27" Monitor. Some
devices and connections may not be able to support the full 2560 x 1440 resolution at 144Hz refresh rates.
Avoid using 3rd party cable adapters/convertors to connect the NX-EDG27 to HDMI, VGA, and DVI output
devices - we cannot guarantee they will be compatible with the NX-EDG27. If you are not sure, please contact
your computer hardware’s manufacturer. Please read this manual before using NX-EDG27 with your computer.
It contains important information regarding the use and care of computer monitors.
Safety and Maintenance:
1) Do not expose the monitor to direct sunlight. Keep the monitor away from a stove or any other heat source.
2) Remove or secure any objects that may fall into the monitor’s vents. Do not obstruct or block the cooling
vents of the monitor.
3) Don’t jam the vents on the enclosure.
4) When setting up the monitor for use, please ensure the power plug and socket are easy to insert and extract.
5) When disconnecting the power cord or DC power line for the monitor, please wait for 6 seconds before
reconnecting the power cord or DC power line wires for normal operation.
6) Please use only approved power line and power adapters provided by Nixeus. If any power connections are
missing, please contact Nixeus for a replacement. Using un-authorized power connectors may damage your
monitor and void your warranty.
7) During operation, please do not throw objects and take care to avoid collision with the monitor. Do not over
clock or modify the monitor’s decoder board. Please do not apply excessive force to the LCD panel or drop the
monitor. Warranty does not cover physical damages, over-clocking, and modifications to the monitor.
8) When monitor is not in use for a long period of time, please disconnect the power plug.
9) When using slightly wet cloth or LCD cleaners to clean the monitor, please disconnect the power adapter. Do
not use organic solvent, alcohol, house hold glass cleaners or ammonia liquid to clean the monitor - these may
damage the display panel.
10) Do not store or use monitor in hot, direct sunlight, or in a cold environment. To avoid electrical shock and
to prevent monitor damage; do not use the monitor in dusty, rain, wet, and humid conditions. If monitor gets
wet, please wipe clean with soft dry cloth as soon as possible. If foreign objects or liquids get into the monitor,
please disconnect power adapter immediately. For service please contact Nixeus Technical support for service
11) To ensure long life and best performance of the monitor, please use the monitor in these safe and optimum
conditions: Temperature = 0-40 degrees Celsius (32°-95° Fahrenheit), Humidity = 20-80% RH
4
Avoiding Image Persistence, Incidental Image or After Image:
1) When the monitor is on and unattended, please use a moving screen saver. If there is a static (non moving
image) on the screen, please refresh regularly or start an application to start using the screen.
2) Long time continuous display of static images may case a “brand” on the screen; this is also cal “image
persistence” or “incidental image” or “after image.” “Brand,” “incidental image” or “after image” is a common
phenomenon of LCD Panel Technology. In most cases, after turning off the power supply for a certain amount
of time the “brand,” “incidental image” or “after image” will gradually disappear. Also by displaying a pure
white image for the entire screen for the same duration that you had the static image that caused the image
persistence may remove the image persistence. Please contact Nixeus if you need assistance in removing image
persistence.
CAUTION: Serious “brand,” “incidental image” or “after image” will not disappear and cannot be repaired.
This type of damage is not covered by warranty. Please take good care of your monitor to prevent serious
“brand,” “incidental image” or “after image.”
Larger display panels may have some glow around the edges or corners. This is known as back light bleed and
Glow - this is normal due to the display LED technology that allows more light and higher brightness to
produce more vibrant colors and brighter pictures.
If your monitor needs replacement parts, warranty service, and repairs please do not attempt to do it yourself!
Doing so may void the warranty. Please contact techsupport@nixeus.com for warranty support. For more
Information, please visit www.nixeus.com
CAUTION: DO NOT PRESS THE RAISED CIRCULAR SECTION AT THE BOTTOM RIGHT CORNER OF THE
BEZEL. It is not a button and it does not have any function.
5
Getting Started
NX-EDG27 NX-EDG27S
Box Contents: for NX-EDG27 (With Height Adjustable, Pivot, Tilt, and Swivel Stand)
• Nixeus EDG 27” IPS 2560x1440 AMD FreeSync 144Hz Gaming Monitor (NX-EDG27)
• Stand Base x 1 (with 4 screws)
• Stand Shaft x 1 (with 4 screws) - preinstalled.
• DisplayPort to DisplayPort Cable x 1
• Power Adapter & Power Cable x 1
• NX-EDG27 Quick Start Guide
• 3.5mm AUX Audio Cable
Installing Base Stand: (Tools needed – Philips Screw Driver)
Please refer to quick start guide for installation of Stand Base and Stand Shaft.
Box Contents: for NX-EDG27S (With Base Tilt Only Stand)
• Nixeus EDG 27” IPS 2560x1440 AMD FreeSync 144Hz Gaming Monitor (NX-EDG27S)
• Stand Base x 1 (with 1 screw)
• Stand Shaft x 1 (with 4 screws) - preinstalled.
• DisplayPort to DisplayPort Cable x 1
• Power Adapter & Power Cable x 1
• NX-EDG27 Quick Start Guide
• 3.5mm AUX Audio Cable
Installing Base Stand: (Tools needed – Philips Screw Driver)
Please refer to quick start guide for installation of Stand Base and Stand Shaft.
NOTE: Both the NX-EDG27 and NX-EDG27S stands are removable to allow for 100%
compatibility with 3rd Party Custom VESA Display Mounting Solutions.
6
Input and Connection Ports
DC-IN: External power connector for Power Adapter
DVI: Dual Link DVI
HDMI 2: HDMI 1.4
HDMI 1: HDMI 2.0 (Supports 2560x1440 Resolution with Refresh Rates up to 144Hz with HDMI 2.0
compliant output device and cable)
DP: DisplayPort 1.2a (Supports 2560x1440 Resolution with Refresh Rates up to 144Hz and with AMD
FreeSync)
Green Audio Input Port: For connecting the audio cable from the audio output of your computer (when using
DVI video connection), gaming console, or other audio output source device.
Blue Audio Output Port: For connecting your headphones, desktop speakers, sound bar, or any other audio
speaker device.
The included DisplayPort to DisplayPort cable is for connecting the NX-EDG27 for DisplayPort output
devices/hardware.
NOTE: Do not use cable/adpater converters to connect the NX-EDG27 to HDMI, DVI, or VGA output
hardware/devices. We cannot guarantee these adapters will work with the NX-EDG27. To enable AMD
FreeSync™ Technology - a direct DisplayPort only cable connection to your computer is required.
NX-EDG27 Power Cable and Power Supply:
Only use the power cable included with the NX-EDG27. Using any other un-authorized power adapters may
damage your monitor and void your warranty. Connect the power cable to internal power supply on the back of
the monitor.
7
Monitor and Stand Adjustment
Monitor Tilting Forward/Back (NX-EDG27 and NX-EDG27S):
Make sure the NX-EDG27 is on a stable level surface. Use both hands, hold the top and bottom of the frame to
tilt the monitor forward or backward by up to 15°.
Monitor Swivel Left/Right (NX-EDG27):
Make sure the NX-EDG27 is on a stable level surface. Holding the base shaft with your hand, carefully twist
the monitor shaft left or right to desired orientation.
Monitor Height Adjustment (NX-EDG27):
Use both hands, press down the locking button, the slide the monitor up and down the stand shaft for your
desired height by up to 4 inches. Release button to lock in the desired height.
8
Monitor Pivot to 90° Portrait Mode (NX-EDG27):
Make sure the NX-EDG27 is on a stable level surface. Using both hands, first raise the monitor to the highest
point. Next pivot the monitor clock wise into portrait mode.
9
Monitor Button Operations - Legends and Functions
Button Functions when NOT navigating in the On Screen Display (OSD) Main Menu
"AUTO" - Press to AUTO detect video inputs. Also brings up the video INPUT menu for DP, HDMI 2.0,
HDMI 1.4 and DVI for switching to different video source.
"MENU" - Brings up and enables the On Screen Display Menu (OSD).
"VOL+" - Increase display's speaker volume. Press to navigate forward or go to next (to the right).
"VOL-" - Decrease display's speaker volume. Press to navigate back or go to previous (to the left).
"UP" - Increase display brightness.
"DOWN" - Decrease display brightness.
[ ] - POWER ON/OFF
10
Video Source Input Selection
The NX-EDG27 supports multiple video source devices with DisplayPort 1.2, HDMI 2.0, HDMI 1.4, and Dual
Link DVI connections.
a) To bring up the INPUT sub menu, press "AUTO."
b) Press "VOL+" to move right or press "VOL-" to move left to select the input for your current video output
source and press "MENU" to confirm.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Nixeus Monitor Handbücher
Nixeus
Nixeus Vue NX-VUE22 Bedienungsanleitung
Nixeus
Nixeus NX-VUE27D Bedienungsanleitung
Nixeus
Nixeus NX-VUE30 Bedienungsanleitung
Nixeus
Nixeus NX-VUE27D Bedienungsanleitung
Nixeus
Nixeus NX-VUE 24A Bedienungsanleitung
Nixeus
Nixeus NX-VUE24B Bedienungsanleitung
Nixeus
Nixeus NX-EDG24S Bedienungsanleitung
Nixeus
Nixeus NX-VUE27C Bedienungsanleitung
Nixeus
Nixeus NX-EDG274K Bedienungsanleitung
Nixeus
Nixeus NX-EDG34S Bedienungsanleitung
