Njoy Aster Series Bedienungsanleitung
Aster Series User Manual
Manual de ulizare
UPCMCOP910HASCG01B
UPCMCOP920HASCG01B
UPCMCOP930HASCG01B
Before using this product, carefully read all product documentaon and retain it for future reference.
131.0
2
UPS unit
Power cord
USB cable
Screws
Screw hole dust covers
Rack accessories
User manual
Warranty card
Package contents
1
The following models belong to the Aster Series UPS:
2000 VA
1000 VA
3000 VA
Aster 2K
Aster 1K
Aster 3K
Thank you for purchasing our products!
Please read this manual before using the product.
nJoy is a brand of power and backup protecon products that
create soluons for mulple levels of environment complexity,
residenal to industrial.
This UPS will protect your electronic equipment from physical
damage and will provide emergency baery backup power to
prevent data loss in the event of power problems.
NOTE!
Before installaon, please inspect the unit. Be sure that nothing inside the
package is damaged. Keep the original package in a safe place for future use.
4
1. Power On/O buon: Master ON/OFF for the UPS.
2. Funcon Buons: Scroll up, scroll down, select and cancel LCD menu
in seng mode.
3. LCD Display: Indicate status informaon, sengs and events.
4. Input Circuit Breaker: The circuit breaker provides opmal overload
protecon.
5. AC Input Inlet: Connect the AC Power cord to a properly wired and
grounded outlet.
6. Baery Backup & Surge Protected Outlets: Provide baery backup
and surge protecon. They ensure power is provided to connected
equipment over a period of me during a power failure.
Crical / Non-crical outlets: Allows the creaon of load priories to
ensure that baery power reserves are transferred to specied outlets
during a power outage. The unit can be programmed to provide
addional runme for equipment connected to the “CRITICAL”
outlets, while stopping the power supply to equipment connected to
“NON-CRITICAL” outlets aer a designated period of me.
7. Extended Runme Baery Module Connector: Connect to
addional external baery modules.
8. SNMP/HTTP Network slot: Slot to install the oponal SNMP card
for remote network control and monitoring.
9. EPO (Emergency Power O) Connector: Enable Power-O in
emergency from a remote locaon.
10. Serial Port: Serial port provides communicaon between the UPS
and the computer. The UPS can control the computer’s shutdown
during a power outage through the connecon while the computer
can monitor the UPS and alter its various programmable parameters.
11. HID USB port: Allows the UPS to appear in Windows like a baery
icon. When the power is out, you can sll see the baery level and
adjust its sengs. Also Windows power management opons are
available. In case you need more advanced local management we
recommend you to install and use “PowerMonitor” soware.
12. Output Circuit Breaker: Provide overload and fault protecon.
5
English
Română
Important safety warnings
3
Please comply with all warnings and operang instrucons in this manual
strictly. Save this manual properly and carefully read the following
instrucons before installing the unit. Do not operate this unit before
reading through all safety informaon and operang instrucons
carefully:
Transportaon
• Please transport the UPS system only in the original package to
protect against shock and impact.
Preparaon
• Condensaon may occur if the UPS system is moved directly from
cold to warm environment. The UPS system must be absolutely dry
before being installed. Please allow at least two hours for the UPS
system to acclimate to the environment.
• Do not install the UPS system near water or in moist environments.
• Do not install the UPS system where it would be exposed to direct
sunlight or near heat sources.
• Do not block venlaon holes in the UPS housing.
Installaon
• Do not connect appliances or devices which would overload the UPS
system (e.g. laser printers) to the UPS output sockets.
• Place cables in such a way that no one can step on or trip over them.
• Do not connect domesc appliances such as hair dryers to UPS
output sockets.
• The UPS can be operated by any individuals with no previous
experience.
• Connect the UPS system only to an earthed shockproof outlet which
must be easily accessible and close to the UPS system.
• Please use only VDE-tested, CE-marked mains cable (e.g. the mains
cable of your computer) to connect the UPS system to the building
wiring outlet (shockproof outlet).
6
• Please use only VDE-tested, CE-marked power cables to connect the
loads to the UPS system.
• When installing the equipment, it should ensure that the sum of
the leakage current of the UPS and the connected devices does not
exceed 3.5mA.
Operaon
• Do not disconnect the mains cable on the UPS system or the building
wiring outlet (shockproof socket outlet) during operaons since this
would cancel the protecve earthing of the UPS system and of all
connected loads.
• The UPS system features its own, internal current source (baeries).
The UPS output sockets or output terminals block may be electrically
live even if the UPS system is not connected to the building wiring
outlet.
• In order to fully disconnect the UPS system, rst press the OFF/Enter
buon to disconnect the mains.
• Prevent uids or other foreign objects from entering the inside of the
UPS system.
• WARNING: This is a category C2 UPS product. In a residenal
environment, this product may cause radio interference, in which
case the user may be required to take addional measures.
Maintenance, service and faults
• The UPS system operates with hazardous voltages. Repairs may be
carried out only by qualied maintenance personnel.
• Cauon - risk of electric shock. Even aer the unit is disconnected
from the mains (building wiring outlet), components inside the UPS
system are sll connected to the baery and electrically live and
dangerous.
• Before carrying out any kind of service and/or maintenance,
disconnect the baeries and verify that no current is present and no
hazardous voltage exists in the terminals of high capability capacitor
such as BUS-capacitors.
7
English
Română
• Only persons are adequately familiar with baeries and with the
required precauonary measures may replace baeries and supervise
operaons. Unauthorized persons must be kept well away from the
baeries.
• Cauon - risk of electric shock. The baery circuit is not isolated
from the input voltage. Hazardous voltages may occur between the
baery terminals and the ground. Before touching, please verify that
no voltage is present!
• Baeries may cause electric shock and have a high short-circuit
current. Please take the precauonary measures specied in this
manual and any other measures necessary when working with
baeries: remove wristwatches, rings and other metal objects, use
only tools with insulated grips and handles.
• When changing baeries, install the same number and same type of
baeries.
• Do not aempt to dispose of baeries by burning them. This could
cause baery explosion.
• Do not open or destroy baeries. Escaping electrolyte can cause
injury to the skin and eyes. It may be toxic.
• Please replace the fuse only with the same type and amperage in
order to avoid re hazards.
• Do not dismantle the UPS system.
8
Installing your UPS system
4
4.1 Rack-mount installaon
1. Rack-mount ears installaon
Aach the two rackmount ears to the UPS using the provided screws
M4X8L*8pcs.
2. Install the UPS on the rack
Place the UPS on a at stable surface with the front of the unit facing
toward you. Secure the UPS to your rack with four M5X12L screws at
the front of the rack. (Located in posion 2 & posion 5).
10
Baery Installaon and replacement
5
Step 1. Remove the front panel. Remove the retaining screws from the
baery bracket and then remove the cover itself. undraw the connectors.
Step 2. Pull the baery tray out slowly. Put the new baery tray back
into the compartment aer that.
Andere Handbücher für Aster Series
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Sprachen:
Andere Njoy UPS Handbücher
Njoy
Njoy Keen Series Bedienungsanleitung
Njoy
Njoy Balder Series Bedienungsanleitung
Njoy
Njoy Argus Series Bedienungsanleitung
Njoy
Njoy Balder 1500 Bedienungsanleitung
Njoy
Njoy Garun Series Bedienungsanleitung
Njoy
Njoy Horus Plus Series Bedienungsanleitung
Njoy
Njoy Aster 6KT Bedienungsanleitung
Njoy
Njoy Echo Pro Series Bedienungsanleitung
Njoy
Njoy Shed 625 Bedienungsanleitung
Njoy
Njoy Septu Series Bedienungsanleitung
Njoy
Njoy Septu Series Bedienungsanleitung
Njoy
Njoy Astris 5K/3P2T2 Bedienungsanleitung
Njoy
Njoy Eido 600 Bedienungsanleitung
Njoy
Njoy Ranger Series Bedienungsanleitung
Njoy
Njoy UPCMCOP130HBAAZ01B Bedienungsanleitung
Njoy
Njoy Argus Series Bedienungsanleitung
Njoy
Njoy Horus Plus Series Bedienungsanleitung
Njoy
Njoy Shed 625 Bedienungsanleitung
Njoy
Njoy PWAV-10001AK-AZ01B Bedienungsanleitung
Njoy
Njoy Keen Series Bedienungsanleitung
Beliebte UPS Handbücher anderer Marken
Pylontech
Pylontech Victron & Pylontech US5000 Bedienungsanleitung
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung
Mecer
Mecer ME-1000-WTU Bedienungsanleitung
Mustek
Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch
Emerson
Emerson Liebert NXL series Bedienungsanleitung
MAKELSAN
MAKELSAN BOXER SERIES Bedienungsanleitung
