1.General Controller Features
The IS-C32G1 controls up to 32 LCD 64x32 switches/displays. The IS-C32G1 is designed to be used in many
different applications. There is total flexibility with user-defined features that allow the controllers to be programmed
for specific applications. The user defined data and set-up are stored in a non-volatile memory and specify the way
the system behaves. The firmware can be customized based on customer requirements. Below are current features:
General features:
•Control up to 32 LCD 64x32 switches/displays. Two banks of 16.
•USB, RS232, RS422/RS485 communication (115,200 baud).
•User downloadable images and backlight colors
•Look up tables for fonts 5x7 and 7x10.
•8 brightness settings.
•Memory for 16,000 images, backlights, and attributes.
•Reports switch activities via serial port.
•Stand-alone operation or real time control by host.
•A 10 pins Auxiliary port with 7 MC pins for control or sense other devices
•Firmware upgradable via USB
Switch-action report from the controller to the host:
•On switch press/release status change, the new statuses are sent over the last communication interface.
Real-time operation features:
•Download a graphic image data to any switch.
•Select any image from flash memory to display on any of switches.
•Create 6x8 font string for a specified row on a specified switch.
•Create 9x12 font string for a specified row on a specified switch.
•Change backlight color on any switch.
2.Electrical Specifications
+6.5VDC to +12VDC power, maximum current is 170mA without switches and 900mA with 32 switches.
WARNING: These products are ESD sensitive. The ESD handling procedure must be followed.
