F1807276 NOA 32C2B英文说明书(欧洲)(3663方案)T5C1大板(两芯)简版V4.1
7
Basic Operations
Remark:
1. Key functionalities refer to remote control functions,
refer to the "Panel Controls" part of the manual.
2. Menu Operation Instruction in this manual is
explained according to TV mode. The operations in
other modes are similar to the one in TV mode, and
users can take it as reference.
3. Before power-on platform, please make sure that
the power supply is stable.
Turning on/Standby
Plug power cable into the electrical socket. Press
[ ] key to turn on the TV. Press [ ▲ ]/ [ ▼] / [ ]/[t] keuy
to select the OSD language which you wish and press
[OK] key to confirm. Press [ ▲] / [ ▼] key to select DVB
Type and press [OK] key to next step.
In display interface, press [ ]/[t] keuy to select Tune
Type which you wish, then press [▼ ] key and you can
select country where you are by pressing
[▲]/[▼]/[t]/[u] key. Next, press [OK] key to confirm(If
you select France, you need to set a password. and
you need to select BW when several countries were
chosen), and the machine starts automatic searching
channel. (If the selected DVB Type is DVB-C, you
need to set Tuning Mode as Network or Full. When
you set it as Network, you need to press [▲]/[▼] key
to select Frequency, Modulation, Network ID and
Symbol Rate. Then press [t]/[u] key to adjust the
items. Finally, select Search and press [OK] key to
starts scanning.)
In power on state, press [ ] key to switch to
standby mode.
★Special Tips: This device adopts energy saving
technology. If there is no signal input in power on state,
it will enter standby state automatically in five minutes;
The device will enter standby state automatically at
specified sleep time;
Signal source selection
You can connect various devices to the TV set and view
high quality images. If the external device has HDMI, AV
and other video output ports, you can connect it to the
TV via its input ports.After connected, turn on the device
and press [SOURCE] key, then menu of signal source
will be displayed on the screen. Press the [ ▲ ]/[ ▼] key
to select the input signal, and press [OK] key to confirm.
Menu operation description
Press [MENU] key to show the main menu on the
screen:
1. Press [t]/[u] key to select a menu from
CHANNEL, PICTURE, SOUND, TIME, OPTION,
LOCK.
2. Press [▲]/[▼] key to select an item in the menu.
3. Press [OK] key to enter the submenu.
4. Press [t]/[u] key to adjust the value or setting.
5. When the main menu shows on the screen,
press [ ]/[MENU] key to exit the main menu;
Press [ ]/[MENU] key to return to previous
menu when the TV display the submenu.
6. During menu operation, the icons of invalid
options will change into grey.
Note: The default password for the lock system is
0000.
Program scanning
Tune the programs before watching the TV for the
first time. Before scanning, please make sure that the
antenna has been connected properly and select
Antenna Type which want to choose. The following
example channel searching Tune Type is under
DVB-T.
Auto Tuning
Press [MENU] key, and select CHANNEL > Auto
Tuning, then press [OK] key. Next, press [t]/[u] key
to select Tune Type: DTV+ATV, DTV, ATV. Press [▼]
key, then you can select country where you are by
pressing [▲]/[▼]/[t]/[u] key and the machine starts
auto tuning after pressing [OK] key.(If you select
France, you must enter the password. And you need to
select BW when several countries were chosen).If you
choose DTV+ATV, the screen displays ''Do you want
to skip ATV tuning?'' by pressing [ ] key during auto
tuning ATV channel. Press [t] key to confirm, then the
machine starts automatic searching DTV channel, or
press [u] key to cancel. During auto tuning DTV
channel, the screen displays ''Do you want to skip DTV
Tuning?'' by pressing [ ] key. Press [t] key to
confirm, or press [u] key to cancel.
