Noam NUTV5 Bedienungsanleitung

NUTV5 Series

OWNER'S MANUAL

This manual will explain how to install your unit as a whole. Detailed instructions for each: HS4

amplifier, controller and N5/NSUB speakers can be found separately inside your NUTV5 /

NUTV5-S/ NUTV5 QUAD package.

Table of Contents

READ BEFORE INSTALLATION........................................................................................................ 4

NUTV5/ NUTV5-S INSTALLATION ................................................................................................... 7

NUTV5 QUAD INSTALLATION...................................................................................................... 10

NUTV5-S QUAD INSTALLATION.....................................................................................................13

WIRING DIAGRAM ....................................................................................................................17

TROUBLSHOOTING ...................................................................................................................18

Introduction

Thank you for choosing NOAM audio for your ride. Your audio system has been designed and manufactured to

exacting standards in order to ensure you will enjoy it for many years to come.

Our maingoal here at NOAM is to provide an excellent audio experience at a most affordable price. Therefore,

in the process of our product design we put a lot of thought into the installation procedure. Our aim is to allow

anyone who feels they are up to it, to install a NOAM system by themselves, and save a few bucks on a

professional installation.

However, if you have no experience in UTV/ ATV/ Marine audio installation, we strongly advise to seek

professional assistance, in order to ensure optimal performance from your system.

Should you decide to install the system yourself, please take the time to read all manuals thoroughly and to

familiarize yourself with its installation requirements and setup procedures. If you have any questions

regarding the instructions in any of the manuals or any aspect of your system’s operation, please contact your

authorized NOAM dealer for assistance or contact us at support@noamaudio.com

Both NUTV5 & NUTV5-S were built as a system. All included components of the unit; Speakers, amplifier &

controller were designed and tuned to match one another and function as a full audio system.

HS4 Amplifier:

The HS4 is an IPX6 waterproof, state of the art, True Class D, 4-channel full range amplifier with fully variable

high pass and low pass crossovers enabling it to drive a wide variety of either full range speakers or

subwoofers.

N5 Speakers:

The pair of N5 speakers features front 5.25” Water-proof Speaker and 20 mm PEI Diaphragm tweeter. On the

back, you’ll find a passive radiator for increased bass experience.

NSUB Subwoofer:

The NSUB is the very firstroll cage mounted subwoofer. Equipped with 10” Marine Subwoofer Speaker on the

front and two 3”x6” passive radiator on the back. * only included in the NUTV5-S models. *

IMPORATNT! READ this BEFORE installing!

Warranty clarifications

1. WATER DAMAGES TO YOUR HS4 AMPLIFIER, ARE NOT COVERED BY THE PRODUCT’S

WARRANTY:

Our engineering team designed the HS4 amplifier’s chassis to be Marine rated. However, we

strongly advise to install it where it’s protected from water/mud at all times. The sealed

structure is designed and constructed to protect the amplifier IN CASE it accidently gets wet,

but it is your responsibility to limit the amp’s exposure to water:

•Install the amplifier in a dry area where water and mud can’t reach it

•Do not clean the amplifier with high pressure or regular water hose. If needed, cover it

while washing your vehicle

2. BURNT VOICE COILES ARE NOT COVERED BY THE PRODUCT'S WARRANTY

We desgined our amplifier to be very powerful. If its gains are set too high (clockwise), it may

cause irreversible damage to the speaker’s voice coils. Exactly for that reason we pre tuned

each and every amplifier to optimaly power the various NUTV5 series audio systems.

Under or overpowering your speakers might cause them thermal (burnt voice coil) and/or

mechanical failure (torn surrounds or spiders). And these damages are not coveredby your

warranty.

Below you will find our recommended factory gains and crossoversettings for each NUTV5

series audio systems (wrong font):

NUTV5 (Two N5 tower speakers)/ NUTV5-S (Two N5 tower speakers and a Subwoofer)/ NUTV5-

S QUAD –(Four N5 tower speakers and a Subwoofer)

NOTE: Rear’s crossover is set on LPF (low pass) for the NSUB subwoofer

Front’s crossover is set on FULL (full range) for tower speakers

NUTV5 QUAD -( Four N5 tower speakers)

Rear and Front’s crossover are set on FULL (full range) for tower speakers

If you have any doubts or questions, please contact us at support@noamaudio.com

Installation Applications:

The NUTV5 series was designed to operate on 12 volts, negative-ground electrical systems. Using this

product with positive ground and/or voltages other than 12V systems may damage the product and will

void the warranty.

Safety Considerations:

•Though this is a Marine IPX6 rated amplifier, mount the amplifier where it will be protected from

water/mud at all times. Water damages are not covered by the 1-year warranty.

•Install the amplifier in a dry and well-ventilated location.

•Do not touch the amplifier's surface while you are riding or immediately after riding. having an

amplifier sealed to the elements at IPX6 level means that heat generated from the amp has

nowhere to escape. Playing hard with your HS4 might get it hot. That’s fine and normal. But,

avoid touching the amplifier’s surface during or right after use.

•Do not mount the amplifier in the engine compartment or in any areas of extreme heat.

•Securely mount the amplifier sothat it does not come loose in the event of a collision/sudden jolt

or as a result of repeated vibrations during normal operation.

•Check before drilling to make sure that you will not be drilling into an exterior panel/hull, fuel

tank, gas/brake line, wiring harness, or other vital system.

•Do not run system wiring outside or underneath the vehicle/vessel. This is an extremely

dangerous practice, which can result in severe damage/injury.

•Protect all system wires from sharp edges (metal, fiberglass, etc.) by carefully routing them, tying

them down and using grommets and loom where appropriate.

Battery considerations

Amplifiers will put an increased load on the vehicle’s battery and charging system. We recommend

checking your alternator/stator and battery condition to ensure that the electrical system has enough

capacity to handle the increased load of your stereo system. Stock batteries which are in good condition

should be able to handle the extra load of the HS4 amplifier without problems, although the life can be

reduced slightly. To maximize the performance of your amplifier, we suggest the use of a heavy-duty

battery or a second battery, dedicated to your NUTV5 system.

NUTV5/ NUTV5-S

Two N5 speakers, HS4amplifier, Bluetooth remote and NSUB subwoofer

Installation Procedure/Connections

If you feel unsure about installing this system yourself, we strongly advise to have it installed by a

qualified technician.

Before installation, Disconnect the NEGATIVE battery post connection and secure the

disconnected cable to prevent accidental reconnection during installation. This is an essential

safety precaution during installation!

Avoid running powerwires nearlow-levelinputcables, antenna, power leads, sensitive equipment or

harnesses.The powerwirescarry substantial currentand could introduce unwantednoise intothe audio

system.

1. Connecting your amplifier to a power source:

A. This amplifier requires quite a lot of power. Therefore, it should be connected straight

to the battery. Do not be tempted to connect it to your bus bar if you have one.

B. Connect the red power cable to the positive (+12V) battery post.

C. Connect the black/Ground power cable to the negative (-12V) battery post.

D. See wiring diagram on page 17

2. Connecting your amplifier to yourhead unit

A. Please refer to the user manual included in your head unit box.

3. Connecting your speakers to the amplifier:

A. Each speaker has 2 terminals:

i. A positive red terminal (+)

ii. A negative black terminal (-)

B. Make sure that you connect a positive speaker terminal (red) to a positive output

channel in your amplifier (solid colors)

C. Make sure you connect a negative speaker terminal (black) to a negative output

channel in your amplifier (mixed color)

D. Connect your two N5 speakers to the two front channels as shown in the table and

diagram below.

E. Your subwoofer will be powered by the 2 bridged rear channels. Connect your

subwoofer the following way (or see table below):

i. Please connect the NSUB's red wire (+) to the positive left rear channel output- solid

green wire.

ii. Please connect the NSUB's Black wire (-) to the negative rightrear channel output-

Purple and black wire

HS4 Wire Color

Speaker 1

Terminal

Speaker 2

Terminal

NSUB Terminals

Green (Rear left (+))

Red (+)

Green & Black (Rear left (-))

Purple (Rear Right (+))

Purple & Black (Rear Right (-))

Black (-)

White (Front Left (+))

Red (+)

White & Black (Front Left (-))

Black (-)

Grey (Front Right (+))

Red (+)

Grey & Black (Front Right (-))

Black (-)

*Make sure you position your speakers in accordance with the amplifier's channel they are connected to. If

the speaker is connected to the left channel make sure you position it on the left-hand side of your ride.

Same goes for the right channel.

NUTV5

NUTV5-S

4. Now that everything is hooked up as it should, let's test your system. Turn your controller on, the

amplifier's power indicator light will first turn RED and If all connections are OK, within 2-5

seconds the light will turn BLUE. In case the light remains red it means that the amplifier is in

protection mode, due to a short circuit, or inadequate voltage, either too high or too low. In this

case see page 18 for troubleshooting.

5. Play some tunes to make sure all is working as it should.

6. Now you can go ahead and mount the amplifier in a dry and well-ventilated location where it

will remain dry at all times.

NUTV5 / NUTV5-S: Amplifier's gains and crossover settings

Your HS4 amplifier’s control panel was already preset to optimally power the N5 Full-range speakers you have

purchased. Since the HS4 is a very powerful amplifier we suggest keeping these factory settings as is.

Under or overpowering your speakers might cause them thermal (burnt voice coil) and/or mechanical failure

(torn surrounds or spiders). And these damages are not coveredby your warranty.

Below you will find our recommended factory gains and crossover settings for your NUTV5/NUTV5-S system.

Rear’s crossover is set on LPF (low pass) for the NSUB subwoofer, should you choose to add one in the

future

Front’s crossover is set on FULL (full range) for tower speakers

In case you decide that you do need to change any of these settings, please make sure you know what you are

doing or have a professional set them for you. The amplifier’s settings and controls are located on the front

panel beneath a protective gasket cover. Remove the six screws from the center panel to access the controls

and make the adjustments. Make sure you replace the cover back exactlyhow it was otherwise you might

compromise the amplifier's waterproof ratings. We remind you that water damagesare not covered by

your warranty.

NUTV5 QUAD

Four N5 speakers,HS4amplifier and Bluetooth remote

Installation Procedure/Connections

If you feel unsure about installing this system yourself, we strongly advise to have it installed by a

qualified technician.

Before installation, Disconnect the NEGATIVE battery post connection and secure the

disconnected cable to prevent accidental reconnection during installation. This is an essential

safety precaution during installation!

Avoid running powerwires nearlow-levelinputcables, antenna, power leads, sensitive equipment or

harnesses.The powerwirescarry substantial currentand could introduce unwantednoise intothe audio

system.

1. Connecting your amplifier to a power source:

A. This amplifier requires quite a lot of power therefore it should be connected straight to

the battery. Do not be tempted to connect it to your bus bar if you have one.

B. Connect the RED power cable to the positive (+12V) battery post.

C. Connect the Black/Ground power cable to the negative (-12V) battery post.

D. See wiring diagram on page 17

2. Connecting your amplifier to yourhead unit

A. Please refer to the user manual included in your head unit box.

3. Connecting your speakers to the amplifier:

A. Each speaker has 2 terminals:

i. A positive red terminal (+)

ii. A negative black terminal (-)

B. Make sure that you connect a positive speaker terminal (red) to a positive output

channel in your amplifier (solid colors)

C. Make sure you connect a negative speaker terminal (black) to a negative output

channel in your amplifier (mixed color)

D. Connect two of your N5 speakers to the 2 front channels and the remaining two to your

2 rear channels as shown in the table and diagram in the next page.

Andere Handbücher für NUTV5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Noam Sprecher Handbücher

Noam

Noam N4 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung